Journal of Structural Engineering: Recent submissions
Now showing items 2741-2760 of 10765
-
Accurate Methods for Elastic Seismic Demand Analysis of Reinforced Concrete Walled Buildings
(American Society of Civil Engineers, 2017) -
Retracted: Characterization of Flexural and Shear Cracks in Reinforced Concrete Beams Using Moment Tensor Inversion from Acoustic Emission Signals
(American Society of Civil Engineers, 2017)Quantitative characterization of fracture mechanisms in concrete is a challenging problem that has not been convincingly solved to date. Several monitoring approaches have been proposed to capture and characterize different ... -
Surrogate Modeling for the Seismic Performance Assessment of Liquid Storage Tanks
(American Society of Civil Engineers, 2017)A three-dimensional surrogate model is presented for the seismic performance assessment of cylindrical atmospheric liquid storage tanks. The proposed model consists of a concentrated fluid mass attached to a single vertical ... -
Multiple-Hazard Fragility and Restoration Models of Highway Bridges for Regional Risk and Resilience Assessment in the United States: State-of-the-Art Review
(American Society of Civil Engineers, 2017)Highway bridges are one of the most vulnerable constituents of transportation networks when exposed to one or more natural hazards, such as earthquakes, hurricanes, tsunamis, and riverine floods. To facilitate and enhance ... -
Steel-Reinforced Concrete Coupling Beams. II: Modeling
(American Society of Civil Engineers, 2017)Using test results presented in previous studies, design and modeling recommendations for steel-reinforced concrete (SRC) coupling beams are provided for both code-based (prescriptive) design approaches and performance-based ... -
Steel-Reinforced Concrete Coupling Beams. I: Testing
(American Society of Civil Engineers, 2017)Structural steel-reinforced concrete (SRC) coupling beams are an alternative to conventional and diagonal rebar-reinforced concrete coupling beams. To address gaps in previous testing that was used to develop design ... -
Force Transfer around Openings in Cross-Laminated Timber Shear Walls
(American Society of Civil Engineers, 2017)This paper presents a study on force transfer around openings (FTAO) in cross-laminated timber (CLT) shear walls. To elucidate the load transfer mechanism in CLT walls, this study used finite-element models to study five ... -
Experimental Study of Self-Centering Shear Walls with Horizontal Bottom Slits
(American Society of Civil Engineers, 2017)This paper introduces a new design form for prestressed shear walls with horizontal bottom slits utilizing cast-in-place technology. Horizontal slits are placed symmetrically at the wall-foundation interface of prestressed ... -
Effect of Sustained Load on Ultimate Strength of High-Strength Composite Columns Using 800-MPa Steel and 100-MPa Concrete
(American Society of Civil Engineers, 2017)To investigate the effect of sustained loads on the ultimate strength of high-strength composite columns using grade 800-MPa steel and 100-MPa concrete, ultimate load tests were performed after long-term loading. Two ... -
Self-Centering Beam-to-Column Connections with Combined Superelastic SMA Bolts and Steel Angles
(American Society of Civil Engineers, 2017)This paper reveals the great potential of using combined superelastic shape memory alloy (SMA) bolts and steel angles for self-centering connections with variable performance targets. Eight full-scale specimens were tested, ... -
Sidewall Buckling of Equal-Width RHS Truss X-Joints
(American Society of Civil Engineers, 2017) -
Seismic Analysis of Precast Concrete Bridge Columns Connected with Grouted Splice Sleeve Connectors
(American Society of Civil Engineers, 2017)Reinforcing bar couplers are used in prefabricated bridge elements and bridge systems for accelerated bridge construction. Grouted splice sleeve connectors are used in bridge substructures because of the enhanced construction ... -
Evolving Studies of Ground Snow Loads for Several Western U.S. States
(American Society of Civil Engineers, 2017) -
Confinement Behavior of Rectangular Reinforced Concrete Prisms Simulating Wall Boundary Elements
(American Society of Civil Engineers, 2017)Observations following recent earthquakes, and from structural testing, indicate numerous brittle compression failures in reinforced concrete seismic-resisting walls. This is unexpected, as most seismic-resisting walls are ... -
Experiments and Simulations of Cold-Formed Steel Wall Assemblies Using Corrugated Steel Sheathing Subjected to Shear and Gravity Loads
(American Society of Civil Engineers, 2017)The paper presents experimental and numerical investigation of cold-formed steel (CFS)–framed walls sheathed with corrugated steel sheets. The new wall technology is considered as an alternative shear wall configuration ... -
Strength and Behavior of Circular FRP-Reinforced Concrete Sections without Web Reinforcement in Shear
(American Society of Civil Engineers, 2017)Considerable experimental research work has been conducted to quantify the shear strength Vcf of rectangular concrete members reinforced with fiber-reinforced polymer (FRP) bars. In contrast, no research seems to have ... -
Building Damage Estimates Using Slowness Change in Propagating Waves
(American Society of Civil Engineers, 2017)This paper presents a damage-evaluation method that estimates the damage level of buildings using ambient vibration measurement and a seismic interferometry technique. A new index, named slowness change and which directly ... -
Multihazard Risk Assessment of Electric Power Systems
(American Society of Civil Engineers, 2017)Electric power systems are susceptible to damage due to natural hazards such as hurricanes and earthquakes. Considerable effort has been made to develop methodologies for assessing the reliability of electric power systems ... -
Efficient Seismic Design of 3D Asymmetric and Setback RC Frame Buildings for Drift and Strain Limitation
(American Society of Civil Engineers, 2017)This paper presents an analysis–redesign-type approach for the efficient seismic design of three-dimensional (3D) irregular RC frame structures for bidirectional ground motions. The designs obtained using the approach ... -
Identification of Wind Loads on Supertall Buildings Using Kalman Filtering–Based Inverse Method
(American Society of Civil Engineers, 2017)A Kalman filtering–based inverse method for identification of wind forces on supertall buildings is proposed. The new approach allows simultaneously estimating the wind loads and entire wind-induced responses of a supertall ...