Journal of Structural Engineering: Recent submissions
Now showing items 2441-2460 of 10765
-
Experimental Assessment of the System-Level Seismic Performance of an Asymmetrical Reinforced Concrete Block–Wall Building with Boundary Elements
(American Society of Civil Engineers, 2017) -
Evaluation of Structural Robustness against Column Loss: Methodology and Application to RC Frame Buildings
(American Society of Civil Engineers, 2017)A computational methodology is presented for evaluating structural robustness against column loss. The methodology is illustrated through application to RC frame buildings, using a reduced-order modeling approach for ... -
Computational Study of Failure of Hybrid Steel Trussed Concrete Beams
(American Society of Civil Engineers, 2017) -
Gusset Plate Connections for Naturally Buckling Braces
(American Society of Civil Engineers, 2017) -
In-Plane Cyclic Testing of Concrete-Filled Sandwich Steel Panel Walls with and without Boundary Elements
(American Society of Civil Engineers, 2017)Concrete-filled sandwich steel panel (CFSSP) walls are composed of two steel skin plates interconnected by tie bars, with the space between the skin plates filled with concrete. These walls are attractive for use in seismic ... -
Design Approach to Determine Shear Capacity of Reinforced Concrete Beams Shear Strengthened with NSM Systems
(American Society of Civil Engineers, 2017) -
Structural Behavior of Longitudinally Posttensioned Timber Beams under Serviceability Gravity Loading
(American Society of Civil Engineers, 2017)The scope of this paper is to quantify the advantages of using unbonded longitudinal posttensioning for long-span timber beams. This sustainable system can be a suitable alternative to more traditional prestressed concrete ... -
Frequency Effect on the Compressive Fatigue Behavior of Ultrahigh Toughness Cementitious Composites: Experimental Study and Probabilistic Analysis
(American Society of Civil Engineers, 2017)Ultrahigh toughness cementitious composite is a cementitious material that exhibits the characteristic of pseudo strain hardening under uniaxial tension, and has potential use in structures that experience repeated or ... -
Frictional Effects in Structural Behavior of No-End-Connected Steel-Jacketed RC Columns: Experimental Results and New Approaches to Model Numerical and Analytical Response
(American Society of Civil Engineers, 2017)Steel jacketing of reinforced concrete (RC) columns is a common retrofitting technique used to restore bearing and deformation capacity of buildings presenting structural deficiencies. For practical reasons, steel angles ... -
Lateral Behavior of Light Wood-Frame Shear Walls with Gypsum Wall Board
(American Society of Civil Engineers, 2017) -
Multihazard Interaction Effects on the Performance of Low-Rise Wood-Frame Housing in Hurricane-Prone Regions
(American Society of Civil Engineers, 2017)Hurricanes represent multihazard events that include wind, windborne debris, storm surge, and rainfall hazards. Conventional risk analysis does not consider the interaction between these multiple hazards and treats each ... -
Planetary Boundary Layer Modeling and Standard Provisions for Supertall Building Design
(American Society of Civil Engineers, 2017)According to recent results of planetary boundary layer research relevant to the design of tall buildings subjected to large-scale synoptic storm winds, for elevations of up to at least 1 km, the longitudinal mean ... -
Eccentric Axial Load Test for High-Strength Composite Columns of Various Sectional Configurations
(American Society of Civil Engineers, 2017)Composite columns of various sectional configurations are studied to maximize the contribution of high-strength steel under compression-flexural loading. For concrete-encased steel (CES) columns, steel angles were placed ... -
Testing an Open-Space Damping System
(American Society of Civil Engineers, 2017) -
Experimental and Numerical Study of Cold-Formed High-Strength Steel CHS X-Joints
(American Society of Civil Engineers, 2017)In this study, the behavior of high-strength steel circular hollow section (CHS) X-joints was systematically investigated by experimental and test-validated numerical analysis. A total of nine CHS X-joints fabricated from ... -
Structural Reliability Analysis Including Correlated Random Variables Based on Third-Moment Transformation
(American Society of Civil Engineers, 2017)In structural reliability analysis, the input variables are often nonnormal and correlated. A procedure for efficient normal transformation, i.e., transforming dependent nonnormal random variables into independent ... -
Optimum Value of Negative Stiffness and Additional Damping in Civil Structures
(American Society of Civil Engineers, 2017)The negative stiffness (NS) phenomenon and additional supplemental damping (AD) were proposed and investigated in recent years. Despite the bulk of literature on the base shear reduction for structures with the NS at the ... -
Discussion of “New Resilience Index for Urban Water Distribution Networks” by G. P. Cimellaro, A. Tinebra, C. Renschler, and M. Fragiadakis
(American Society of Civil Engineers, 2017) -
Stress-Based Topology Optimization of Steel-Frame Structures Using Members with Standard Cross Sections: Gradient-Based Approach
(American Society of Civil Engineers, 2017) -
Peak Sliding Demands on Unanchored Equipment and Contents in Base-Isolated Buildings under Pulse Excitation
(American Society of Civil Engineers, 2017)