Journal of Structural Engineering: Recent submissions
Now showing items 2241-2260 of 10765
-
Second-Order Direct Analysis of Domelike Structures Consisting of Tapered Members with I-Sections
(American Society of Civil Engineers, 2016)A new and advanced beam-column element, namely the curved tapered-three-hinges (TTH) beam-column element, is proposed in this paper. The present element can perform large deformation analysis and explicitly simulate the ... -
Determination of Bond Stress Distribution Coefficient by Maximum Likelihood Method
(American Society of Civil Engineers, 2016)Transfer length is a significant parameter in the design of pretensioned concrete members. The estimation of transfer length is typically achieved by measuring concrete strain or strand slip at the member ends. The end ... -
Exploratory Study of Seismic Response of Deficient Lap-Splice Columns Retrofitted with Near Surface–Mounted Basalt FRP Bars
(American Society of Civil Engineers, 2016)This paper presents a near surface–mounted (NSM) retrofit technique to enhance the seismic performance of existing reinforced-concrete (RC) columns with lap-splice deficiencies using basalt fiber-reinforced polymer (BFRP) ... -
Influence of Multicolumn Removal on the Behavior of RC Floors
(American Society of Civil Engineers, 2016)With the numerous catastrophic incidences of progressive collapse in the past, there has been increasing interest from both engineering and academic communities toward evaluating the ability of reinforced concrete (RC) ... -
Experimental Investigation on Stub-Column Behavior of Cold-Formed High-Strength Steel Tubular Sections
(American Society of Civil Engineers, 2016)This paper presents the experimental investigation on the compressive behavior of cold-formed high-strength steel tubular stub columns. In this paper, the nominal 0.2% proof stress of the high-strength steel was 700, 900, ... -
Evaluation of Sloped RBS Moment Connections
(American Society of Civil Engineers, 2016)AISC 358 provides steel connections that are prequalified for use in special and intermediate moment frames (SMF and IMF). Implicit in this standard is that the beam and column are orthogonal to each other in the elevation ... -
Displacement-Based Compatibility Strut-and-Tie Method and Application to Monotonic and Cyclic Loading
(American Society of Civil Engineers, 2016)The compatibility strut-and-tie method (C–STM) is an efficient minimalist nonlinear modeling approach for shear-critical reinforced concrete members. This paper presents two key improvements to the C–STM to better model ... -
Development of Reinforced and Posttensioned Glass Beams: Review of Experimental Research
(American Society of Civil Engineers, 2016)The use of structural glass in buildings is a growing trend, especially with glass beams, which are increasingly used to support roofs, floors, and glazed facades. However, beams consisting of glass laminates only expose ... -
Negative Stiffness Device for Seismic Protection of Structures: Shake Table Testing of a Seismically Isolated Structure
(American Society of Civil Engineers, 2016)The concept of apparent weakening by adding true negative stiffness to a structure has been previously introduced by the authors in order to reduce simultaneous drifts, accelerations, and displacements in a structure without ... -
Axial Load and Cyclic Lateral Load Tests for Composite Columns with Steel Angles
(American Society of Civil Engineers, 2016)To enhance the structural capacity and constructability of composite columns, a prefabricated steel-reinforced concrete (PSRC) column was developed. By using the prefabricated steel cage, field rebar work is unnecessary, ... -
Theorems for Flexural Design of RC Members
(American Society of Civil Engineers, 2016)Three theorems of the flexural theory for RC members are derived to identify two critical points on a moment–curvature curve: (1) the onset of flexural strength and (2) the onset of the so-called true ultimate ... -
Experimental Investigation of In-Plane Cyclic Response of Unbonded Posttensioned Masonry Walls
(American Society of Civil Engineers, 2016)This paper reports on an experimental study on four unbonded posttensioned masonry walls (PT-MWs). All walls had identical thickness, height, and length of 190, 2,000, and 1,400 mm, respectively, and were constructed ... -
Analysis of Thin Steel Plate Shear Walls Using the Three-Strip Model
(American Society of Civil Engineers, 2016)Thin steel plate shear walls (SPSWs) are an effective lateral force resisting system and are increasingly being used in structures. Engineers require the ability to predict both elastic and inelastic structural responses ... -
Impact Tests of Model RC Columns by an Equivalent Truck Frame
(American Society of Civil Engineers, 2016)An equivalent frame is developed to simulate the effect of a large-size truck colliding with a reinforced-concrete column. The surrogate frame is made of simple steel elements and blocks, representing the major features ... -
Vibration of Prestressed Cable RC Truss Floor System due to Human Activity
(American Society of Civil Engineers, 2016)Vibration has become a serious serviceability problem due to the large openings of girder, lightweight floor systems, and high-strength materials used in practice. The results from both heel-drop and jumping floor vibration ... -
Strong-Axis Stability of Wide Flange Steel Columns in the Presence of Weak-Axis Flexure
(American Society of Civil Engineers, 2016)Column stability during seismic events is a critical consideration for all steel-framed structures, but is of particular importance for a unique class of steel frames called multitiered braced frames (MT-BFs). A MT-BF is ... -
Stochastic Nonlinear Behavior of Reinforced Concrete Frames. I: Experimental Investigation
(American Society of Civil Engineers, 2016)This paper reports a systematic experimental investigation into the stochastic nonlinearities inherent in reinforced concrete (RC) frames. A series of specimen tests is conducted with a static monotonic lateral loading ... -
Stochastic Nonlinear Behavior of Reinforced Concrete Frames. II: Numerical Simulation
(American Society of Civil Engineers, 2016)Experimental investigations on the stochastic nonlinear behavior of eight half-scale reinforced concrete (RC) frames with the same conditions in the companion paper indicates that the coupling effect between randomness and ... -
Compressive Behavior of Gusset Plates Connected with Single-Angle Members
(American Society of Civil Engineers, 2016)Gusset plate connections with single-angle steel members are commonly used in power transmission towers. However, little research has been carried out with regard to the compressive behavior and design of gusset plates ... -
Impact of Hinged Connectors on Sandwich Panel Behavior
(American Society of Civil Engineers, 2016)This paper discusses the impact of hinged connectors (a common connection in folding structures) on the behavior of sandwich panels (with fiber-reinforced polymer faces and foam core). A sandwich panel is subjected to ...