Journal of Structural Engineering: Recent submissions
Now showing items 2001-2020 of 10765
-
Vortex-Induced Vibration Performance and Suppression Mechanism for a Long Suspension Bridge with Wide Twin-Box Girder
(American Society of Civil Engineers, 2018)This study investigates the vortex-induced vibration (VIV) behavior of a twin-box girder bridge by means of aerodynamic sectional wind tunnel test and particle image velocimetry (PIV) measurements. The effect of grid plates ... -
Experimental and Numerical Investigations of Shock Wave Attenuation Effects Using Protective Barriers Made of Steel Posts
(American Society of Civil Engineers, 2018)The use of protective barriers is one of the most common approaches to protect buildings and their occupants against blast and vehicle impacts. They increase the stand-off distance between the explosive source and the ... -
Three-Dimensional Composite Floor Systems under Column-Removal Scenarios
(American Society of Civil Engineers, 2018)In this study, four 1/3-scaled enhanced steel frame–composite floor specimens were tested quasi-statically under a column-removal scenario. One specimen was the control test and the other three were different in terms of ... -
Quasi-Mechanism Method of Structural Morphogenesis Based on Self-Adapting Function of Net System
(American Society of Civil Engineers, 2018)This study explores a geometric method of structural morphogenesis, referred to here as the quasi-mechanism (QM) method because it is based on the self-adapting function of mechanism systems. First, a net-shaped mechanism ... -
Seismic Capacity Quantification of Gusset-Plate Connections to Fracture for Ductility-Based Design
(American Society of Civil Engineers, 2018)This paper presents an experimental study on the seismic performance up to fracture of gusset-plate brace connections. During the inelastic behavior of a bracing member (e.g., buckling), weak-axis bending in the gusset ... -
Lateral Performance of Traditional Heavy Timber Frames with Mortise-Tenon Joints Retrofitted Using Self-Tapping Screws
(American Society of Civil Engineers, 2018)This paper presents the test results of three 1/2-scaled Chinese traditional mortise-tenon jointed beam-column frames, initially loaded to damage and retrofitted by use of self-tapping screws and retested under a constant ... -
Low-Cycle Fatigue Testing of Shear Links and Calibration of a Damage Law
(American Society of Civil Engineers, 2018)This paper experimentally studies the low-cycle fatigue (LCF) behavior of shear links in eccentrically braced frames (EBFs) with the aim of calibrating a convenient damage law for estimating the exhausted as well as remaining ... -
Simulating Local Buckling-Induced Softening in Steel Members Using an Equivalent Nonlocal Material Model in Displacement-Based Fiber Elements
(American Society of Civil Engineers, 2018)Fiber-based elements are commonly used to simulate steel beam–columns because of their ability to capture P-M interactions and spread of plasticity. However, when mechanisms such as local buckling result in effective ... -
Seismic Response Sensitivity to Uncertain Variables in RC Frames with Infill Walls
(American Society of Civil Engineers, 2018)Seismic fragility analysis involves probabilistic assessment of the seismic performance of structures. A large amount of uncertainty is involved in the estimation of seismic fragility. The probabilistic modeling framework ... -
Finite-Element Analysis and Parametric Study of Perforated Steel Plate Shear Connectors for Wood–Concrete Composites
(American Society of Civil Engineers, 2018)Wood–concrete composites are structural deck systems that benefit from the use of wood as a lightweight, sustainable substructure and concrete as a wear-resistant, vibration-damping top element. These systems employ shear ... -
Analytical Model for Initial Rotational Stiffness of Steel Beam to Concrete-Filled Steel Tube Column Connections with Bidirectional Bolts
(American Society of Civil Engineers, 2018)The initial rotational stiffness of connections is important for the design of semirigid frames. However, most current studies on steel beam to concrete-filled steel tube column connections with bidirectional bolts are ... -
Implementation of Effective Force Testing for Nonlinear Structures
(American Society of Civil Engineers, 2018)Effective force testing (EFT) is a dynamic testing method that can consider the rate-dependent behavior of a structure. Because of the lack of knowledge of real-time force control for a servohydraulic actuator, however, ... -
Stability and Adequate Bracing Design of Pretensioned Cable-Braced Inverted-Y-Shaped Ferris Wheel Support System Using Matrix Structural Second-Order Analysis Approach
(American Society of Civil Engineers, 2018)Elastic buckling and second-order analyses are conducted using the matrix structural analysis approach for the in-plane and out-of-plane stability and adequate bracing design of a new type of Ferris wheel support system ... -
Experimental and Theoretical Studies on the Shear Resistance of Steel–Concrete–Steel Composite Structures with Bidirectional Steel Webs
(American Society of Civil Engineers, 2018)The steel–concrete–steel (SCS) sandwich composite structures with orthogonal longitudinal and transverse (bidirectional) steel webs exhibit superiorities in strength, ductility, impact resistance, blast resistance, and ... -
Effect of Design Methodology on Collapse of Friction Pendulum Isolated Moment-Resisting and Concentrically Braced Frames
(American Society of Civil Engineers, 2018)Base isolation is an effective method for mitigating seismic hazards and improving seismic performance under design-level ground motions. Previous studies have typically focused on comparing the performance of isolated and ... -
Underwater Large-Scale Experimental Fatigue Assessment of CFRP-Retrofitted Steel Panels
(American Society of Civil Engineers, 2018)Some steel structures, such as hydraulic navigation and marine structures, operate in harsh wet and corrosive environments and can suffer significant deterioration. The deterioration manifests itself in the form of corrosion, ... -
Seismic-Response Analysis of RC C-Shaped Core Walls Subjected to Combined Flexure, Shear, and Torsion
(American Society of Civil Engineers, 2018)Although dynamic torsional responses are often regarded as secondary effects in the seismic design of symmetric-plan buildings, torsional effects arising from plan asymmetry can be substantial in some cases. In RC wall ... -
Distortional and Lateral Buckling of Z-Purlins with Sloping Lips in Flexure
(American Society of Civil Engineers, 2018)A unified model that can be used to study both distortional buckling and global lateral buckling of cold-formed Z-purlins with sloping lips is presented. The model is composed of the compressive lipped flange and part of ... -
Seismic Retrofit of an Existing 10-Story Chevron-Braced Steel-Frame
(American Society of Civil Engineers, 2018)A seismically deficient 1-story chevron-braced frame located on the west coast of Canada is retrofitted using different schemes. The building was designed in accordance with the Canadian codes applicable in the mid-198s, ... -
Cyclic Performance of Steel Plate–Reinforced High Toughness–Concrete Coupling Beams with Different Span-to-Depth Ratios
(American Society of Civil Engineers, 2018)In coupled shear wall or core wall systems, reinforced-concrete (RC) coupling beams are crucial to the seismic performance of the overall structure. These coupling RC beams, however, tend to undergo brittle shear failure, ...