Journal of Structural Engineering: Recent submissions
Now showing items 1501-1520 of 10765
-
Experimental Investigation of Wind-Driven Rain Propagation in a Building Interior
(ASCE, 2020)Posthurricane surveys have shown that building interior damage often results from water intrusion into the building interior. The interior damage can make up 50%–100% of the total building loss; therefore, its accurate ... -
Reinforced-Concrete Shear Walls Retrofitted Using Weakening and Self-Centering: Numerical Modeling
(ASCE, 2020)This paper investigates a novel retrofit strategy for code-deficient reinforced-concrete (RC) shear walls that are vulnerable to undesirable failure modes. The strategy combines weakening by partially cutting the wall base ... -
Probabilistic Life Prediction for Reinforced Concrete Structures Subjected to Seasonal Corrosion-Fatigue Damage
(ASCE, 2020)The coupled effect of corrosion and fatigue deteriorates the performance of reinforced concrete (RC) structures. This paper proposes a novel framework for the probabilistic life prediction of aging RC structures under ... -
3D Beam Element for the Analysis of Torsional Problems of Steel-Structures in Fire
(ASCE, 2020)The paper presents the development of a three-dimensional (3D) beam element for the analysis of steel structures in fire that properly accounts for the degradation of the torsional strength and stiffness owing to thermal ... -
Effects of End Distance and Temperature on Thin-Sheet Steel Double Shear-Bolted Connections
(ASCE, 2020)An experimental investigation was conducted with thin-sheet steel (TSS) double shear-bolted connections at elevated temperatures. The connection specimens were fabricated by TSS 0.42-mm G550 and 1.90-mm G450. The specimens ... -
Estimating Seismic Response of RC Piers under Unidirectional and Bidirectional Shaking: A Mechanics-Based Approach
(ASCE, 2020)Estimating seismic response of reinforced concrete (RC) structures under bidirectional excitation covering admissible incidence angles is computationally challenging and time-consuming for routine design. Further, such ... -
Rotational Capacity of Bolted Double-Web-Angle Beam-Column Gravity Connections through Full-Scale Experimental Testing
(ASCE, 2020)Double-web-angle beam–column connections are used extensively for gravity framing in steel buildings. Although they are designed to resist shear and to allow rotation, they still possess moment capacity that may contribute ... -
Analytical Approach to Characterize Tornado-Induced Loads on Lattice Structures
(ASCE, 2020)This paper presents a quasi-steady technique that combines aerodynamic force coefficients from straight-line wind tunnel tests with empirically developed tornado wind speed profiles to estimate the time history of aerodynamic ... -
Enhanced Voids Growth Model for Ductile Fracture Prediction of High-Strength Steel Q690D under Monotonic Tension: Experiments and Numerical Simulation
(ASCE, 2020)Accurate prediction of progressive damage and failure of structural steels is a nontrivial issue in practical design and assessment of steel structural buildings. It appears far more important in the fracture-oriented ... -
In-Plane Response of Perforated Unreinforced Masonry Walls under Cyclic Loading: Experimental Study
(ASCE, 2020)This paper presents the results of an experimental study into the behavior of perforated (containing openings) unreinforced masonry (URM) walls subjected to cyclic in-plane lateral loading. Damage to perforated URM walls ... -
Toe-Screwed Cross-Laminated Timber Connection Design and Nonlinear Modeling
(ASCE, 2020)This research investigated the mechanical characteristics of cross-laminated timber (CLT) connections fastened with structural wood screws, also known as self-tapping screws (STS). The CLT connection assemblies were ... -
Long-Term Behavior of Posttensioned Wood Howe Trusses
(ASCE, 2020)Two full-scale Howe trusses were instrumented and posttensioned to study their time-dependent behavior in outdoor conditions. Force, relative humidity, and temperature data were acquired for more than 2 years. In ... -
Twin Rotor Damper for Human-Induced Vibrations of Footbridges
(ASCE, 2020)Footbridges often have a lightweight and slender design. As a result, they tend to be susceptible to human-induced vibrations. In this paper, the application of the twin rotor damper (TRD), an active mass damper consisting ... -
Coupled Thermomechanical Damage Modeling for Structural Steel in Fire Conditions
(ASCE, 2020)This study developed a coupled thermomechanical damage model for structural steel at elevated temperatures. The need for adequate modelling of steel deterioration behavior remains a challenging task in structural fire ... -
Reduced-Order Modeling of Composite Floor Slabs in Fire. I: Heat-Transfer Analysis
(ASCE, 2020)This paper presents a reduced-order numerical modeling approach for the analysis of heat transfer in composite floor slabs with profiled steel decking exposed to fire effects. This approach represents the thick and thin ... -
SMA-Based Low-Damage Solution for Self-Centering Steel and Composite Beam-to-Column Connections
(ASCE, 2020)This paper presents a low-damage solution for self-centering steel and composite beam-to-column connections, with the issue of beam-growth being particularly addressed by permitting the connections to rotate only about the ... -
Experimental Study and Analytical Model of Concrete Cover Spalling Induced by Steel Corrosion
(ASCE, 2020)Concrete cover spalling induced by steel corrosion is generally assumed to be the limit state of concrete structures when considering their structural safety. A new method for testing the resisting bending moment in a ... -
Shear Strength of Concrete-Filled Steel Tubes Based on Experimental Results
(ASCE, 2020)Experimental results provided in the related literature are used in the present study to develop a method for estimating the shear strength of circular concrete-filled steel tubes (CFSTs). This study benefits from using ... -
Closed-Form Solutions for Initial Thermal Postbuckling Response of Axially Restrained Columns
(ASCE, 2020)Closed-form equations for the initial thermal postbuckling response of axially restrained elastic columns with six well-known sets of rotational and lateral end restraints are presented. These equations, which are consistent ... -
Mechanical Characterization of Normal and High-Strength Steel Bars in Reinforced Concrete Members under Fire
(ASCE, 2020)This study investigates the high-temperature mechanical response of deformed steel bars used in the United States (ASTM A615 and A706, all grades) for the construction of reinforced concrete structural members that are at ...