Journal of Structural Engineering: Recent submissions
Now showing items 1081-1100 of 10765
-
Analytical Strength Prediction Model for Full-Width Circular Hollow Section X-Joints
(ASCE, 9/1/2021)Full-width tubular joints, consisting of chord and brace members of the same width (or diameter), have been frequently used in architectural, civil, and offshore structures owing to their higher load resistance compared ... -
Measurement, Characterization, and Modeling of Initial Geometric Imperfections in Wide-Flange Steel Members Subjected to Combined Axial and Cyclic Lateral Loading
(ASCE, 9/1/2021)Wide-flange (W-shape) steel members are known to have initial geometric imperfections. A three-dimensional noncontact laser-scanning technique is used to measure the imperfection fields in fourteen specimens. A spectral ... -
Probabilistic Seismic Response and Capacity Models of Piles for Statewide Bridges in California
(ASCE, 9/1/2021)This study develops the probabilistic seismic response and capacity models for the broad collection of standard pile designs that are routinely incorporated into bridges in California. A review of the state bridge inventory ... -
Buckling Curves for Cold-Formed Stainless-Steel Columns and Beams
(ASCE, 10/1/2021)This paper summarizes the background information and methodology used to derive a set of buckling curves proposed for cold-formed stainless steel columns and beams incorporated in the recently revised SEI/ASCE 8-21 ... -
Evaluation of Design Equations for Critical Properties of Reinforced Elastomeric Bearings and Recommended Revisions
(ASCE, 9/1/2021)Global interest in seismic isolation technology continues to increase due to the satisfactory performance of isolated structures in recent earthquake events. In addition to the overall response of the structure, the design ... -
Comparative Study on Seismic Fragility Assessment of Self-Centering Energy-Absorbing Dual Rocking Core versus Buckling Restrained Braced Systems under Mainshock–Aftershock Sequences
(ASCE, 9/1/2021)A strong mainshock may cause several aftershocks within a short interval. These aftershocks can make buildings damaged during the mainshock more vulnerable to collapse. Hence, it is critical to study the seismic responses ... -
Numerical and Experimental Assessment of an Improved Design Detail for Partially Grouted Reinforced Masonry Wall Structures
(ASCE, 8/1/2021)Reinforced masonry buildings predominantly are partially grouted in areas of low or moderate seismicity in North America. The walls in such structures typically contain widely spaced separately grouted vertical reinforced ... -
Experimental Performance Assessment of Large-Scale Polyurethane-Enhanced Damage-Resistant Bridge Columns with Energy Dissipation Links. II: Quantitative Results
(ASCE, 10/1/2021)This paper, which is the second of two companion papers, presents the results of a large-scale testing program on a novel bridge column design, termed polyurethane (PU)-enhanced rocking column with energy dissipation (ED) ... -
Experimental Performance Assessment of Large-Scale Polyurethane-Enhanced Damage-Resistant Bridge Columns with Energy Dissipation Links. I: Overview and Damage Assessment
(ASCE, 10/1/2021)This paper, which is the first of two companion papers, investigates the performance of a novel bridge column design, termed polyurethane (PU)-enhanced rocking column with energy dissipation (ED) links, through a large-scale ... -
Performance-Based Wind Design of High-Rise Buildings Using Generated Time-History Wind Loads
(ASCE, 9/1/2021)Performance-based wind design (PBWD) allowing inelastic behavior under extreme wind load has only been recently considered for design of high-rise buildings. Unlike performance-based seismic design, there are few guidelines ... -
Strength Determination and Fracture Characteristics of Bolted Connections
(ASCE, 9/1/2021)Bolted connections are commonly used for attaching structural elements in various civil and mechanical engineering applications. Despite their popularity, various studies raised concerns over the adequacy of design provisions ... -
Robustness Assessment of Reinforced Concrete Frames under Progressive Collapse Hazards: Novel Risk-Based Framework
(ASCE, 8/1/2021)Robustness assessment is an important component for performance-based progressive collapse design. However, existing methods either do not consider the cascading failure feature of progress collapse, or fail to recognize ... -
Effect of Wetting and Redrying on Performance of Cross-Laminated Timber Angle Bracket Connection
(ASCE, 9/1/2021)Cross-laminated timber (CLT) is an engineered wood product offering several advantages for wood utilization in midrise and tall buildings. However, moisture intrusion poses significant risks since it can affect the durability ... -
Dynamic Response Characteristics that Lead to Direct Shear Failure in Blast-Loaded Columns
(ASCE, 9/1/2021)Blast-loaded structures respond dynamically to impulsive loads generated by an explosion. Individual components must possess adequate flexural and sectional shear capacity to survive such extreme loads. Unlike static loads, ... -
Modular Connector for Resilient Grid-Shell Structures
(ASCE, 8/1/2021)In the design, fabrication, and erection of grid shells, a major challenge is the nodal connector between members. Designers typically select a structure’s form and then design the nodal connectors to meet geometric and ... -
Parametric Collapse Performance of Low-Ductility Concentrically Braced Frames with Reserve Capacity
(ASCE, 8/1/2021)In moderate-seismic regions, cost-effective steel building design solutions such as the R=3 and ordinary concentrically braced frame (OCBF) systems do not consistently provide reliable life-safety protection. The collapse ... -
FEA Strategy for Realistic Simulation of Buckling-Restrained Braces
(ASCE, 11/1/2021)Buckling-restrained braces (BRBs) are seismic devices that provide structures such as buildings and bridges with lateral support, dissipating more energy than traditional bracing. Large-scale laboratory testing to assess ... -
Gradual Crushing of Steel Reinforced HPFRCC Beams: Experiments and Simulations
(ASCE, 8/1/2021)While the tensile performance of high-performance fiber-reinforced cementitious composites (HPFRCC) has been extensively studied, the crushing behavior is less understood. Notably, crushing is an important load-reduction ... -
Static Load Test on the Progressive Collapse Resistance of Precast Concrete Frame Substructure during and after High Temperature
(ASCE, 8/1/2021)With the recent increased use of precast concrete (PC) structures, their progressive collapse resistance under hazardous conditions, such as explosion and fire, has become a great concern for the structural engineering ... -
Behavior and Design of Steel-Concrete Composite Columns Subjected to Combined Axial Compression and Biaxial Moment
(ASCE, 8/1/2021)Steel-concrete composite columns are strong and efficient structural members. However, their strength is not consistently recognized within design standards. In particular, current provisions regarding the strength of ...