Journal of Structural Engineering: Recent submissions
Now showing items 1041-1060 of 10765
-
Uniform Strip Model of Steel Plate Shear Walls with Different Plate Thicknesses
(ASCE, 11/1/2021)The strip model, which is currently the most commonly used simplified analytical model for steel plate shear walls (SPSWs), neglects the compressive stiffness and resistance of the infill plate, thus underestimating the ... -
Evaluation of Masonry Beams with Openings and Validation Using a Strut-and-Tie Model
(ASCE, 12/1/2021)Strut-and-tie modeling (STM) has been proven to conservatively predict the strength of specialty concrete structures such as corbels, dapped ends, and deep beams with openings. The objectives of this study were to predict ... -
Nonlinear Finite-Element Analysis of the Seismic Behavior of RC Column–Steel Beam Connections with Shear Failure Mode
(ASCE, 10/1/2021)RC column–steel beam (RCS) systems, a novel type of hybrid structure, have been used widely in recent decades owing to their excellent seismic performance and simple fabrication process. However, due to the effects of ... -
Group-Theoretic Buckling Analysis of Symmetric Plane Frames
(ASCE, 10/1/2021)This paper presents a computationally efficient formulation based on group theory, for the buckling analysis of symmetric plane frames. Numerical examples ranging from simple frames with one vertical plane of symmetry to ... -
Behavior of High-Strength and Ultrahigh-Performance Concrete Targets Subjected to Relatively Rigid Projectile Impact
(ASCE, 10/1/2021)This experimental study was conducted to evaluate the impact behavior of relatively rigid projectiles with conical and hemispherical nose shapes on normal to high-strength and ultrahigh performance concrete (UHPC). For ... -
Response and Modeling of Steel Tubes Filled with Recycled Fine and Coarse Aggregate Concretes under Long-Term Loading
(ASCE, 11/1/2021)The engineering properties of concrete with recycled aggregates (RAC) can vary more widely than normal aggregate concretes (NAC). Because concrete-filled steel tubes do not rely solely on the concrete in compression, using ... -
In-Plane Shear Cyclic Performance of Spline Cross-Laminated Timber-Concrete Composite Diaphragms
(ASCE, 10/1/2021)Over the past decade, cross-laminated timber (CLT) panels have gained popularity worldwide. To achieve larger spans and to increase the resistance to diaphragm seismic and wind forces to be transferred through CLT floor ... -
A Novel Shear Strength Prediction Approach for Headed Shear Studs Embedded in Ultrahigh-Performance Concrete
(ASCE, 11/1/2021)Due to the excellent mechanical properties of ultrahigh-performance concrete (UHPC), the shear strength of stud–UHPC composite connections is significantly enhanced. Nevertheless, the underlying mechanism remains not fully ... -
Nonlinear Dynamic Response of Single-Degree-of-Freedom Systems Subjected to Along-Wind Loads. I: Parametric Study
(ASCE, 11/1/2021)The lateral strength and stiffness requirements due to wind loads usually govern the design of tall buildings. The current building codes in the US, Canada, and Europe recognize the first significant yield point as an ... -
Nonlinear Dynamic Response of Single-Degree-of-Freedom Systems Subjected to Along-Wind Loads. II: Implications for Structural Reliability
(ASCE, 11/1/2021)Part I of the two companion papers postulated and proved the capability of self-centering systems in controlling the wind-induced damage accumulations due to long-duration along-wind loads. The present Part II paper ... -
Stiffness Modifiers to Support the Seismic Design of Reinforced Concrete Rectangular Columns
(ASCE, 10/1/2021)Stiffness modifiers are used in linear structural analysis programs to recognize the low-strain amplitude nonlinear material stress–strain response and support the design of reinforced concrete structures. For example, ... -
Extreme Typhoon Wind Speed Mapping for Coastal Region of China: Geographically Weighted Regression–Based Circular Subregion Algorithm
(ASCE, 10/1/2021)The coastal region of China is exposed to severe typhoon threats and suffers significant casualties as well as economic losses due to seven to eight landed storms every year. This study developed a geographically weighted ... -
Wind Interference Effects from One High-Rise Building and Similar Low-Rise Flat-Roof Buildings
(ASCE, 9/1/2021)Wind tunnel tests in an open terrain were carried out to study interference effects on peak pressure coefficients of one low-rise flat-roof building due to one high-rise building and similar low-rise buildings. The results ... -
Experimental and Numerical Study of the Performance of Self-Centering Frame Structures Subjected to Debris-Flow Impacts
(ASCE, 11/1/2021)To investigate the performance of self-centering RC frame structures subjected to debris-flow impacts, a series of debris-flow impact tests of a traditional RC frame structure (TF) and a self-centering RC frame structure ... -
Performance of Steel Frames with Different Web Bolt Number and Arrangements in a Column-Loss Scenario
(ASCE, 10/1/2021)When a steel frame is subjected to an abnormal load, a sudden local failure due to the loss of a load carrying member may result in progressive collapse of the entire structure. In this study, experiments and numerical ... -
Influence of Axial Compression Ratio on the Seismic Performance of Precast Columns with Grouted Sleeve Connections
(ASCE, 12/1/2021)Substantial attention has been paid to precast structures due to their obvious advantages. While precast members connected by grouted sleeves are used in seismic regions, studies on the seismic performance of precast column ... -
MID 1.1: Database for Characterization of the Lateral Behavior of Infilled Frames
(ASCE, 10/1/2021)Research on infilled reinforced concrete frames is fundamental for the vulnerability assessment of existing buildings. The analysis of the interaction between infill and frame is an open issue in performance-based earthquake ... -
Iterative and Simplified Sandwich Beam Theory for Partially Composite Concrete Sandwich Wall Panels
(ASCE, 10/1/2021)This paper presents an iterative sandwich beam theory (ISBT) and a simplified version suitable for the design termed simplified sandwich beam theory (SSBT) used to predict the elastic mechanics of partially composite ... -
Interpretable XGBoost-SHAP Machine-Learning Model for Shear Strength Prediction of Squat RC Walls
(ASCE, 11/1/2021)RC shear walls are commonly used as lateral load-resisting elements in seismic regions, and the estimation of their shear strengths can become simultaneously design-critical and complex when they have so-called squat ... -
Probabilistic Model for Remaining Fatigue Life Estimation of Bridge Components
(ASCE, 10/1/2021)Structural health monitoring provides a measurement-informed quantitative and systematic framework to better assess the state of fatigue in aging infrastructure. In this paper, a general methodology for probabilistic ...