Journal of Structural Engineering: Recent submissions
Now showing items 1001-1020 of 10765
-
Experimental and Analytical Study of Flexural Buckling of Cold-Formed Steel Quadruple-Limb Built-Up Box Columns
(ASCE, 2021-10-19)To better understand the mechanical behavior of cold-formed steel (CFS) quadruple-limb built-up box-section (QBB) columns associated with flexural buckling, 12 axial compression tests with different slenderness ratios and ... -
Flexural Behavior of High-Strength Rectangular Concrete-Filled Steel Tube Members
(ASCE, 2021-10-20)This study experimentally and numerically investigates the flexural behavior of high-strength rectangular concrete-filled steel tube (CFST) members. An experimental database including 30 flexural tests on high-strength ... -
Influence of Stiffness and Damping Parameters of Passive Seismic Control Devices in One-Sided Rocking of Masonry Walls
(ASCE, 2021-11-19)This paper analyzes the influence of horizontal damped and undamped restraints in terms of the amplification of the response of rocking masonry walls subjected to seismic excitations. It also makes a practical contribution ... -
Experimental Investigation of Friction at Buckling-Restrained Brace Debonding Interfaces
(ASCE, 2021-11-16)The friction behavior of mortar–polymer–steel debonding interfaces was experimentally investigated to support numerical simulation of buckling-restrained braces (BRBs). Characteristic contact and slip demands were developed ... -
Nonlinear Finite-Element Modeling of HF2V Lead Extrusion Damping Devices: Generic Design Tool
(ASCE, 2021-10-19)Supplemental energy-dissipation devices are increasingly used to protect structures, limiting loads transferred to structures and absorbing significant response energy without sacrificial structural damage. The displacement ... -
Stability Design of Stainless Steel Structures
(ASCE, 2021-10-18)The direct analysis method (DAM), featuring second-order elastic analysis with two stiffness reduction factors (τb and τg), is the primary means of stability design for steel structures in AISC 360 and AISI S100. The ... -
Shaking-Table Test on a Two-Story Timber-Framed Masonry Structure Retrofitted with Ultra-High Ductile Concrete
(ASCE, 2021-10-19)Timber-framed masonry structures were widely used in eastern Asia as residential buildings. Due to a lack of seismic design, they are vulnerable to major earthquakes. To date, there are limited technologies available for ... -
Unbonded Post-Tensioned Structural Masonry Wall with Rubber Interface for Limited-Damage Systems
(ASCE, 2021-10-18)Unbonded post-tensioned (UPT) tendons have been used in structural masonry walls to enhance the self-centering capability of the walls. However, the lateral displacement capacity of masonry walls with UPT tendons can be ... -
Block Shear Strength of Coped Beam Connections with Double Bolt Lines
(ASCE, 2021-10-18)Coped beam connections are commonly used in the construction of steel structures. Existing block shear provisions for these connections, with multiple bolt lines, account for the presence of uneven stress distribution only ... -
State-Space Formulation for Structural Analysis with Coupled Degradation-Plasticity and Geometric Nonlinearity
(ASCE, 2022-01-31)A nonlinear beam finite-element model is developed to account for distributed plasticity, complex degradation phenomena, axial–moment–shear interactions, and geometric nonlinearity. The formulation is derived based on ... -
Bond–Slip Models for Corroded RC Members Exposed to Fire
(ASCE, 2021-12-16)This paper presents the latest research findings investigating RC members’ residual load–slip response to combined damage caused by corrosion and fire. The idea is to simulate an accidental fire in old or aging structures ... -
Temperature Attained in Intumescent Coating–Protected Concrete-Filled Circular Steel Tubular Sections under the Standard Fire Condition
(ASCE, 2021-10-18)This paper presents the results of an experimental and numerical investigation to obtain a simplified analytical method to calculate intumescent coating thermal conductivity and temperatures of intumescent coating–protected ... -
Simplified Methods for Progressive Collapse Assessment of Frame Structures
(ASCE, 11/1/2021)The Imperial College Robustness Assessment Framework is a methodology—based upon application of the alternate load path concept—for quantitatively comparing the performance of different structural arrangements to a ... -
Axial-Load Resistance of a Novel UHPFRC Grouted SHS Tube-Sleeve Connection: Experimental, Numerical, and Theoretical Approaches
(ASCE, 11/1/2021)Experimental, numerical, and theoretical analyses were conducted of the axial load resistance of a novel ultrahigh-performance fiber-reinforced concrete (UHPFRC) grouted square hollow section (SHS) tube sleeve connection. ... -
The Weakness of Robustness
(ASCE, 11/1/2021)Having a sufficient degree of robustness is generally believed to be an essential property of a safe structure. However, there is a lot of confusion about the exact meaning of the word as well as the way how this criterion ... -
Vertical Progressive Collapse of Cmposite Floor Systems under a Side Column Removal Scenario: Experimental and Numerical Investigations
(ASCE, 11/1/2021)The propensity of buildings for progressive collapse can be assessed using the alternative path method. Generally, there are three scenarios to be considered: internal column, side column, and corner column removals. Many ... -
Using DEM to Investigate Boundary Conditions for Rocking URM Facades Subjected to Earthquake Motion
(ASCE, 11/1/2021)Façade overturning is a frequently observed collapse mechanism occurring in unreinforced masonry (URM) buildings during high-intensity, earthquake-induced shaking. Following complete separation from a building, the rocking ... -
Experimental and Numerical Investigations on Seismic Performance of CFST Frame with External Diaphragm Joint
(ASCE, 11/1/2021)This paper aims to investigate the seismic performance of a steel frame with an external diaphragm joint between a concrete-filled steel tube (CFST) column and H-shaped steel beam through experiments and finite-element ... -
Comprehensive Investigations of the Effect of Bolt Tightness on Axial Behavior of a MERO Joint System: Experimental, FEM, and Soft Computing Approaches
(ASCE, 12/1/2021)In the present experimental study, 12 specimens were tested to assess and quantify the effects of bolt tightness on the overall behavior of a bolt-ball joint under uniaxial loading. A three-dimensional (3D) nonlinear ... -
Simplified Modal Pushover Analysis to Estimate First- and Higher-Mode Force Demands for Design of Strongback-Braced Frames
(ASCE, 12/1/2021)Strongback-braced frames employ an essentially elastic truss, or strongback, that defines an elastic load path to redistribute seismic demands and mitigate the formation of story mechanisms. However, unlike the forces from ...