Now showing items 4881-4900 of 7001

    • Beam‐Column Element on Weak Winkler Foundation 

      A. Ghani Razaqpur (American Society of Civil Engineers, 1989)
      The analysis of beam‐column systems resting on a Winkler foundation is simplified using modern numerical techniques. Recently, finite elements based on the solution of the governing differential equation have been derived ...
    • Numerical Modeling of Concrete Using a Partially Associative Plasticity Model 

      Youcai Wu; John E. Crawford (American Society of Civil Engineers, 2015)
      A description and results from validation studies for the Karagozian & Case (K&C) concrete (KCC) model are presented in this paper. This material model is primarily intended for modeling the dynamic responses of RC structural ...
    • Inelastic Torsional Response of a Single‐Story Framed Structure 

      B. K. Raghu Prasad; K. S. Jagadish (American Society of Civil Engineers, 1989)
      In this paper, a single‐story, bilinear‐hysteretic structure, square in plan and supported on four columns, subjected to two horizontal ground motions is studied. The model is assumed to possess three degrees of freedom, ...
    • Response Spectrum Analysis of Class of Torsionally‐Coupled Buildings 

      Reem Hejal; Anil K. Chopra (American Society of Civil Engineers, 1989)
      An effective procedure is developed for estimating the maximum response of a class of torsionally‐coupled, multistory buildings due to earthquake ground motion characterized by smooth response spectra. Several properties ...
    • Cloud Computing-Based Time Series Analysis for Structural Damage Detection 

      Ling Yu; Jing-Chun Lin (American Society of Civil Engineers, 2017)
      The structural damage detection (SDD) and on-line integrity assessment is one of the fundamental objectives in the field of structural health monitoring (SHM). Unfortunately, some of the existed SDD methodologies are ...
    • Extraction of Constitutive Data from Specimens Undergoing Strain Localization 

      M. Ortiz (American Society of Civil Engineers, 1989)
      In specimens undergoing strain localization, applied forces and the corresponding measured displacements cannot be directly constraed as stress‐strain data, owing to the inhomogeneous character of the deformation. This ...
    • Structural Response Variability III 

      A. Kardara; C. G. Bucher; M. Shinozuka (American Society of Civil Engineers, 1989)
      The response variability of statically indeterminate linear structures due to spatial variation of material or geometry properties, or both, is investigated. Utilizing a Green's function formulation or the more general ...
    • Experimentally Determined Stresses at Geometric Discontinuities Using Simple Stress Functions 

      A. A. Khaja; R. E. Rowlands (American Society of Civil Engineers, 2015)
      Recognizing that the most serious structural stresses often occur at holes or notches, the ability to determine such stresses by combining recorded load-induced temperature information with simple stress functions is ...
    • Solidification Theory for Concrete Creep. II: Verification and Application 

      Zdeněk P. Bažant; Santosh Prasannan (American Society of Civil Engineers, 1989)
      The theory that was formulated in the preceding paper is verified and calibrated by comparison with important test data from the literature pertaining to constant as well as variable stress at no (or negligible) simultaneous ...
    • Solidification Theory for Concrete Creep. I: Formulation 

      Zdeněk P. Bažant; Santosh Prasannan (American Society of Civil Engineers, 1989)
      The paper presents a new general constitutive law for creep in which the aging due to continuing hydration of cement is taken into account in a manner that is both simpler and physically better justified than in existing ...
    • Optimal Design for Axisymmetric Cylindrical Shell Buckling 

      Robert Levy; William R. Spillers (American Society of Civil Engineers, 1989)
      This paper discusses the structural optimization problem of finding the optimal wall fhickness of an axisymmetric cylindrical shell so as to maximize the buckling load when the volume of material is fixed. An optimality ...
    • Optimization of Imperfection‐Sensitive Structures 

      G. V. Palassopoulos (American Society of Civil Engineers, 1989)
      The degrading effect of small shape imperfections on the buckling strength of certain nominally optimized structures is investigated. A general method for such problems is presented, which reduces the imperfection effect ...
    • Biaxial Tension Stiffening due to Generally Oriented Reinforcing Layers 

      Richard A. Link; Alaa E. Elwi; Andrew Scanlon (American Society of Civil Engineers, 1989)
      Panel‐type concrete structures are generally reinforced with more than one layer of steel in different directions. The response of the panels under general states of in‐plane stress is a function of cracking and the ...
    • Characteristics and Computational Procedure in Softening Plasticity 

      Kenneth Runesson; Ragnar Larsson; Stein Sture (American Society of Civil Engineers, 1989)
      Characteristics of finite element solutions involving strain‐softening plasticity are discussed with reference to strain localization and stability for simple uniaxial problems. The stability of localized and nonlocalized ...
    • Experimental Study of Active Control for MDOF Seismic Structures 

      L. L. Chung; R. C. Lin; T. T. Soong; A. M. Reinhorn (American Society of Civil Engineers, 1989)
      Active control of building structures has been extensively studied theoretically, using a variety of control schemes showing varying degrees of efficiency. The demand for experimental evidence of feasibility of control of ...
    • Constitutive Equations for Concrete in Failure State 

      R. de Boer; H. T. Dresenkamp (American Society of Civil Engineers, 1989)
      For concrete, two simple three‐dimensional failure conditions depending on the first invariant of the stress tensor as well as on the second and third invariant of the stress deviator tensor with two and four material ...
    • Discussion of “<i>Beam on Partially Yielded Foundation</i>” by Shoji E. Yamada (February 1988, Vol. 114, No. 2) 

      J. Dario Aristizabal‐Ochoa (American Society of Civil Engineers, 1989)
    • Parametric Sensitivity in First Order Reliability Theory 

      Peter Bjerager; Steen Krenk (American Society of Civil Engineers, 1989)
      New insight into parametric sensitivity in first-order reliability theory is given by studying the parametric sensitivity of the most likely failure point. A formula is derived for the derivative of the unit normal vector ...
    • Blockage Correction for Sharp‐Edged Bluff Bodies 

      A. S. Ramamurthy; R. Balachandar; Diep Ngoc Vo (American Society of Civil Engineers, 1989)
      On the basis of a simple momentum-balance approach, semiempirical relations are derived for the variation of the steady drag force of two-dimensional, sharp-edged bluff bodies, such as flat plates and equiangular prisms, ...