Now showing items 4301-4320 of 7001

    • Shear‐Band Analysis in Idealized Granular Material 

      J. P. Bardet; J. Proubet (American Society of Civil Engineers, 1992)
      Two‐dimensional particles experience shear bands as real granular materials; they form a convenient vehicle to investigate shear bands within granular soils. Numerical simulations on these idealized materials are used to ...
    • Improved Rectangular Element for Shear Deformable Plates 

      Fuh‐Gwo Yuan; Robert E. Miller (American Society of Civil Engineers, 1992)
      A 40‐degree‐of‐freedom displacement‐type rectangular finite element for shear deformable flat plates is presented. The element includes transverse shear effects, is fully conforming, may be orthotropic, and has a stiffness ...
    • Thermomechanical Buckling of Multilayered Composite Plates 

      Ahmed K. Noor; Jeanne M. Peters (American Society of Civil Engineers, 1992)
      A study is made of the thermomechanical buckling of composite plates subjected to combined thermal and axial loadings. The plates considered consist of a number of perfectly bonded layers and have symmetric lamination with ...
    • Theoretical Study of Crack‐Induced Eigenfrequency Changes on Beam Structures 

      Robert Y. Liang; Jialou Hu; Fred Choy (American Society of Civil Engineers, 1992)
      The theoretical relationships between eigenfrequency changes and magnitudes and the locations of crack‐induced damage are developed for beam structures with either simply supported or cantilever boundary conditions. For ...
    • FEM Modeling of Fictitious Crack Propagation in Concrete 

      Walter H. Gerstle; Ming Xie (American Society of Civil Engineers, 1992)
      Using a mixed‐mode extension of the Hillerborg fictitious crack model, a practical interface finite element approach is used to model discrete crack propagation. The fictitious crack tip propagates perpendicular to the ...
    • Low‐Order Interpolation Functions for Curved Beams 

      S. J. Pantazopoulou (American Society of Civil Engineers, 1992)
      Polynomial interpolation functions for finite element analysis of three‐dimensional (3‐D) curved beams are derived using small deformation theory. The performance of low‐order polynomials combined with selectively reduced ...
    • Timoshenko Beam Element Resting on Two‐Parameter Elastic Foundation 

      L. M. Shirima; M. W. Giger (American Society of Civil Engineers, 1992)
      The objective of this paper is to present the complete force‐displacement relationship for a Timoshenko beam element resting on a two‐parameter elastic foundation. Both the stiffness matrix and nodal‐action column‐vector ...
    • Fatigue of Welded Cruciforms Subjected to Narrow‐Band Loadings 

      S. Sarkani; D. P. Kihl; J. E. Beach (American Society of Civil Engineers, 1992)
      High‐strength welded steel cruciforms are tested under variable‐amplitude loadings to determine the effect of the root‐mean‐square (rms) of the loading process on the rate of fatigue‐damage accumulation. All variable‐amplitude ...
    • Constitutive Model for Ice 

      H. A. Khoo; T. M. Hrudey (American Society of Civil Engineers, 1992)
      A uniaxial constitutive model for ice is developed in which the total strain is taken to be the sum of instantaneous elastic, delayed elastic, and viscous strain components. Nonlinear behavior of selected terms in the model ...
    • Reviewers of the <i>Journal of Engineering Mechanics</i> 

      Unknown author (American Society of Civil Engineers, 1992)
    • Analysis and Implementation of Thin‐Layer Element for Interfaces and Joints 

      K. G. Sharma; C. S. Desai (American Society of Civil Engineers, 1992)
      An analysis and implementation of the thin‐layer element of Desai et al. for interfaces and joints shows that the planar approximation of the element treated as a solid element can provide satisfactory simulation of the ...
    • Flexural‐Torsional Stability of Thin‐Walled Columns 

      Juha Paavola; Seppo Salonen (American Society of Civil Engineers, 1992)
      This paper discusses the problem of flexural‐torsional stability of columns with open thin‐walled cross sections. It introduces an analytical solution technique applicable to the differential equation system describing the ...
    • Elastic Buckling Coefficients for Long, Unstiffened Plates 

      Julie Mark Cohen (American Society of Civil Engineers, 1992)
      Long, unstiffened plates are thin plates stiffened at only one edge parallel to the direction of stress. These occur in various shapes, including a T-shaped section. For modeling purposes, the plates can be assumed to be ...
    • Optimal Linear Segmented Structures with Variable Segment Boundaries 

      C. J. Goh; C. M. Wang (American Society of Civil Engineers, 1992)
      Recently, the writers and others considered the optimization of continuously linear segmented structures. This geometrical constraint has practical advantages in actual design problems from the viewpoints of fabrication ...
    • Buckling of Pressurized Axisymmetrically Imperfect Cylinders under Axial Loads 

      Jin‐Guang Teng; J. Michael Rotter (American Society of Civil Engineers, 1992)
      It has long been recognized that the strength of a thin, axially compressed, unstiffened cylinder is governed by bifurcation into a nonsymmetric displacement mode, that the strength is acutely sensitive to very small ...
    • Probabilistic Description of Buffeting Response of Long‐Span Bridges. II: Extended Analysis 

      Friedrich J. Wall; Christian G. Bucher (American Society of Civil Engineers, 1992)
      The buffeting response of long‐span bridges in turbulent wind is dealt with in the present investigation. Herein the analysis is based on linear models describing the structural behavior and the fluid‐structure interaction. ...
    • Vibration Control of Beams by Beam‐Type Dynamic Vibration Absorbers 

      Tadayoshi Aida; Susumu Toda; Norio Ogawa; Yasuo Imada (American Society of Civil Engineers, 1992)
      Dynamic vibration absorbers with one degree of freedom are generally applied to the passive control of beam vibration. These absorbers are useful to control a single mode of vibration under harmonic excitation. In this ...
    • Axial and Free‐Bending Analysis of Spiral Strands Made Simple 

      Mohammed Raoof; Yu Ping Huang (American Society of Civil Engineers, 1992)
      Parametric studies based on previously reported orthotropic sheet theory have been carried out on a number of realistic and multilayered helical‐strand constructions with widely different strand (and wire) diameters and ...
    • Frequency Domain Optimal Control of Wind‐Excited Buildings 

      J. Suhardjo; B. F. Spencer, Jr.; A. Kareem (American Society of Civil Engineers, 1992)
      An optimal frequency‐domain approach to active control of wind‐excited buildings is proposed in which the