Now showing items 4201-4220 of 7001

    • Frictionless Contact with BEM Using Quadratic Programming 

      Srd˜an Šimunovic; Sunil Saigal (American Society of Civil Engineers, 1992)
      The contact surface, with its accompanying load transfer, may well constitute the critical factor in a structural member. Thus it is essential to be able to perform contact stress analysis of a component accurately and ...
    • Stiffness Matrix for Nonlinear Analysis of Thin‐Walled Frames 

      Aura Conci (American Society of Civil Engineers, 1992)
      This paper describes a new stiffness matrix for large deflection and buckling analysis of three‐dimensional thin‐walled frames, which is decomposed as the sum of three matrices. The element formulation allows the use of ...
    • Free‐Bending Fatigue Life Estimation of Cables at Points of Fixity 

      Mohammed Raoof (American Society of Civil Engineers, 1992)
      The shortcomings of the traditional design approaches based on the extreme fiber (in terms of simple beam theory) direct wire stresses as the factor controlling strand restrained bending fatigue performance, have been ...
    • Response of Plates of Arbitrary Shape Subject to Static Loading 

      K. M. Liew (American Society of Civil Engineers, 1992)
      The paper presents the static analysis of arbitrarily shaped plates. The analysis is performed using the principle of minimum potential energy with the admissible
    • Conditional and Joint Failure Surface Crossing of Stochastic Processes 

      Øistein Hagen (American Society of Civil Engineers, 1992)
      In an unpublished 1990 work, H. O. Madsen interpreted the upcrossing rate of scalar stochastic processes as a particular sensitivity measure of the failure probability associated with a suitably modeled parallel system. ...
    • Antiplane Problems of Monoclinic Material 

      Chien‐Ching Ma (American Society of Civil Engineers, 1992)
      The antiplane problem of anisotropic materials is studied by the Mellin transform technique. The material considered in this study possesses a symmetry plane at
    • Dynamics of Saturated Rocks. IV: Column and Borehole Problems 

      Irene Vgenopoulou; Dimitri E. Beskos (American Society of Civil Engineers, 1992)
      The one‐dimensional dynamic column and borehole problems of rock mechanics are solved analytically and numerically on the assumption that the water fully saturated, elastic rock medium is characterized by two degrees of ...
    • Novel Photoelastic Approach in Analysis of Elliptical Holes in Thick Plates 

      Sameh S. Issa; G. A. Maamoun (American Society of Civil Engineers, 1992)
      Nondestructive photoelastic stress analysis of elliptical holes in thick plates was carried out. Using Plexiglas as a model material, the scattered photoelastic technique was used. In a novel approach, the residing ...
    • Wind Effects on Base‐Isolated Structures 

      Yu Chen; Goodarz Ahmadi (American Society of Civil Engineers, 1992)
      The sensitivity of base‐isolated structures to wind loadings is studied. The wind velocity is decomposed into mean and random fluctuating parts. A stationary random model for the fluctuating part of wind velocity is ...
    • Synchrotron Radiation Measurements of Degree of Saturation in Porous Matrix 

      Scott A. Wells; Richard I. Dick (American Society of Civil Engineers, 1992)
      An experimental technique is developed using synchrotron radiation to determine changes in the degree of saturation in a drying porous matrix. Analyses of the drying characteristics of two synthetic slurries, kaolin and ...
    • Elastoplastic Deformation for Particulates with Frictional Contacts 

      Ching S. Chang; Anil Misra; Kofi Acheampong (American Society of Civil Engineers, 1992)
      Perceiving granular material as a collection of particles, a constitutive law for granular material is derived based on a micromechanics approach, taking into account the mechanisms of sliding and separation of particles ...
    • Steady‐State Nonlinear Heat Transfer in Multilayered Composite Panels 

      Ahmed K. Noor; Lazarus H. Tenek (American Society of Civil Engineers, 1992)
      A two‐dimensional computational model is developed for nonlinear heat transfer in multilayered composite panels. The model is based on a first‐order thermal lamination theory with a linear through‐the‐thickness variation ...
    • Boundary‐Element Direct Reanalysis for Continuum Structures 

      J. H. Kane; B. L. Keshava Kumar; R. H. Gallagher (American Society of Civil Engineers, 1992)
      Concepts involving direct approaches for continuum structural reanalysis of modified shapes employing the boundary‐element analysis (BEA) method are considered. A boundary‐element zone‐condensation technique is shown to ...
    • Creep and Creep Rupture of Metallic Composites 

      D. N. Robinson; W. K. Binienda; M. Miti‐Kavuma (American Society of Civil Engineers, 1992)
      A creep and creep damage theory is presented for metallic composites with strong fibers. Application is to reinforced structures in which the fiber orientation may vary throughout but a distinct fiber direction can be ...
    • Multivariable Analysis using Isoparametric Finite Elements 

      Ping Wang; William K. Rule (American Society of Civil Engineers, 1992)
      A new technique for multivariable analysis of empirical data, based on the isoparametric formulation commonly used with the finite element method, is described. Traditional two- and three-dimensional isoparametric shape ...
    • Point‐Estimate Method for Calculating Statistical Moments 

      K. S. Li (American Society of Civil Engineers, 1992)
      A number of approximate methods exist in the literature for estimating the statistical moments of a random function. The usual approach is based on Taylor series expansion about the mean values of the random variables. ...
    • Classical Buckling Load of Spherical Domes under Uniform Pressure 

      Haruo Kunieda (American Society of Civil Engineers, 1992)
      The purpose of this paper is to provide the classical buckling load of a spherical dome subjected to a uniformly distributed load and clarify the effect of boundary conditions, conical angles, and radius‐thickness ratios ...
    • Branch Switching in Bifurcation of Structures 

      Fumio Fujii; Kok Keong Choong (American Society of Civil Engineers, 1992)
      A branch‐switching strategy in an elastostatic bifurcation problem is described. Only linearized incremental equations are used. Higher‐order terms of increments and eigenvalue analysis are not required. Uneconomical ...
    • Stable Controllers for Instantaneous Optimal Control 

      J. N. Yang; Z. Li; S. C. Liu (American Society of Civil Engineers, 1992)
      Recently, instantaneous optimal control algorithms were proposed and developed for applications to control of seismically excited linear, nonlinear, and hysteretic structural systems. In particular, these control algorithms ...
    • Compressive Softening Model for Concrete 

      Eiji Mizuno; Shigemitsu Hatanaka (American Society of Civil Engineers, 1992)
      A strain‐space‐based plasticity model is proposed to represent the softening as well as hardening behavior of concrete under low confining pressure. Unlike the stress‐space plasticity theory based on the Drucker's postulate, ...