Journal of Engineering Mechanics: Recent submissions
Now showing items 3721-3740 of 7001
-
Dynamic Modeling and Response of Rigid Embedded Cylinders
(American Society of Civil Engineers, 1995)Following a brief review of the limitations of a popular technique for modeling the soil action in analyses of the dynamic response of deeply embedded cylindrical foundations and structures, the sources of the limitations ... -
Closure to “Seismic Random‐Vibration Analysis of Multisupport‐Structural Systems” by Ernesto Heredia‐Zavoni and Erik H. Vanmarcke
(American Society of Civil Engineers, 1995) -
Book Review
(American Society of Civil Engineers, 1995) -
Particle Model for Quasibrittle Fracture and Application to Sea Ice
(American Society of Civil Engineers, 1995)Fracture of quasibrittle materials with a large zone of distributed cracking is simulated by the particle model (discrete element method). The particles at the microlevel interact only by central forces with a prescribed ... -
Determination of Wind-Induced Fatigue Loading on Roof Cladding
(American Society of Civil Engineers, 1995)Strong wind pressures can cause severe fatigue damage to the screw-fastened light gauge steel roofing of low-rise buildings. An approach to determine the fatigue loading of roof cladding is presented here. The rain-flow ... -
Calculation of Eigenvectors with Uniform Accuracy
(American Society of Civil Engineers, 1995)In nonlinear eigenvalue problems, the standard method for calculating eigenvectors is to first calculate the eigenvalue. The nonlinear governing matrix is then formed using the calculated eigenvalue, a random disturbance ... -
Impedances for Radially Inhomogeneous Viscoelastic Soil Media
(American Society of Civil Engineers, 1995)The dynamic impedances of a radially inhomogeneous viscoelastic soil layer with a central hole are formulated based on a new boundary zone model with a nonreflective boundary. A parabolic variation of the medium properties ... -
Seismic Random-Vibration Analysis of Multisupport-Structural Systems
(American Society of Civil Engineers, 1995) -
Energy-Based Automatic Mixed-Mode Crack-Propagation Modeling
(American Society of Civil Engineers, 1995)Based on an energy principle and a virtual crack extension technique, a practical finite-element modeling approach for the automatic mixed-mode two-dimensional (2D) linear elastic fracture mechanics (LEFM) crack-propagation ... -
Experimental Fluid-Force Coefficients for Wake-Induced Cylinder Vibration
(American Society of Civil Engineers, 1995)A mathematical model based on the unsteady-flow theory is presented for wake-induced vibration of an elastic circular cylinder in the wake of another circular cylinder. Motion-dependent fluid forces were measured for six ... -
Toppling of Rigid Block under Evolutionary Random Base Excitations
(American Society of Civil Engineers, 1995)The rigid block considered here represents an idealized model for a piece of equipment, a monument, a storage tank, or even a tall building, which may topple by rocking under intense ground shaking at its base during an ... -
Effect of Fiber Rupture on Tensile Properties of Short Fiber Composites
(American Society of Civil Engineers, 1995)A probabilistic-based micromechanical model has been developed for the postcracking behavior of a brittle matrix reinforced with short, randomly distributed fibers. The model that predicts the composite-bridging stress ... -
Self-Equilibrating Element for Second-Order Analysis of Semirigid Jointed Frames
(American Society of Civil Engineers, 1995)An accurate pointwise equilibrating polynomial element with springs connected to its ends to model semirigid connections is derived. The formulated element and coded computer program for second-order nonlinear analysis of ... -
Studying Disk Movements by Novel Image-Analysis Method
(American Society of Civil Engineers, 1995)An image-analysis method developed to study granular flow, the accumulating particle trajectories (APT) method, is shown to be a versatile tool to study the movements of disks. The moving disks, which are provided with ... -
Large-Deflection Analysis of Whipping Pipes. I: Rigid, Perfectly-Plastic Model
(American Society of Civil Engineers, 1995)A theoretical model is constructed for a large-deflection analysis of a rigid, perfectly-plastic cantilever with a tip mass loaded by a transverse follower force pulse. The purpose of building and analyzing such a model ... -
Large-Deflection Analysis of Whipping Pipes. II: Rigid, Perfectly-Plastic Beam Model with Elastic Root Spring
(American Society of Civil Engineers, 1995)In a companion paper, the effects of large deflections were evaluated for plastic deformation of a cantilever beam under a transverse force pulse applied at its tip. Here, the effect of material elasticity is introduced ... -
Error Measure for Reliability Studies Using Reduced Variable Set
(American Society of Civil Engineers, 1995)A reduction in the number of random variables carried in a structural-reliability analysis can be achieved by an orthogonal transformation of the basic random vector to a vector of independent standard normal variables, ... -
Vibration Control of Moving Flexible Member Using Piezoelectric Actuators
(American Society of Civil Engineers, 1995)The active vibration control of a moving flexible member was studied in this work. The equation of motion of flexible members could be expressed as a continuous time-varying state equation in the state space. The matrix ... -
Free Vibration of Orthotropic Cantilever Plates with Point Supports
(American Society of Civil Engineers, 1995)The method of superposition is used to achieve a free-vibration analysis of orthotropic cantilever plates resting on point supports. In the initial development of the analysis it is assumed that the supports are symmetrically ... -
Spectral Analysis of Fluid Flow in Oscillating Grid Reactor
(American Society of Civil Engineers, 1995)