Now showing items 3561-3580 of 7001

    • Torsion in Symmetric Structures due to Ground-Motion Spatial Variation 

      Ernesto Heredia-Zavoni; Federico Barranco (American Society of Civil Engineers, 1996)
      A random-vibration analysis is performed for the torsional response of symmetric structural systems subjected to spatially varying earthquake ground motion. Torsional effects are assessed by means of an equivalent eccentricity ...
    • Quartic Formulation for Elastic Beam-Columns Subject to Thermal Effects 

      B. A. Izzuddin (American Society of Civil Engineers, 1996)
      This paper presents an advanced elastic formulation intended for modeling imperfect beam-columns subject to thermal loading using only one element per member. The new formulation is derived in a local Eulerian (convected) ...
    • Fiber Orientation in Composite Structures for Optimal Resistance to Creep Failure 

      David N. Robinson; Wei Wei (American Society of Civil Engineers, 1996)
      The objective of this research is to provide an approximate but reliable method of assessing various fiber configurations in a metallic composite structure with the intent of achieving optimal resistance to creep failure. ...
    • Stability of Shear Deformable Thin-Walled Space Frames and Circular Arches 

      Sung-Pil Chang; Sung-Bo Kim; Moon-Young Kim (American Society of Civil Engineers, 1996)
      A consistent finite-element formulation is presented in order to analyze the spatial stability of shear deformable thin-walled space frames and circular arches. The displacement field of unsymmetric thin-walled cross ...
    • Buckling Analysis of Elastic Space Rods under Torsional Moment 

      Yoshiaki Goto; Xiao-Song Li; Toshihiro Kasugai (American Society of Civil Engineers, 1996)
      The buckling behavior of elastic space rods under torsional moment is studied theoretically. A consistent method is developed to identify the buckling torsional moment as well as to trace the postbuckling path. Since this ...
    • Parameter Models for Estimating In-Situ Tensile Force in Tie-Rods 

      Stefano Sorace (American Society of Civil Engineers, 1996)
      Two analytical models are presented for the identification of the actual static scheme and tensile force of metallic tie-rods included in masonry arches and vaults. The reference structural system consists of a moment-resistant ...
    • Reduced-Order Sand Model for Ground Response Analysis 

      X. S. Li (American Society of Civil Engineers, 1996)
      “Ground response” in geotechnical earthquake engineering refers to the response of level ground subjected to seismic loading originating from the underlying rock formation. Catering to this special loading condition, the ...
    • Stochastic Damage Model for Brittle Materials Subjected to Monotonic Loading 

      S. Kandarpa; D. J. Kirkner; B. F. Spencer Jr. (American Society of Civil Engineers, 1996)
      A one-dimensional stochastic micromechanical model is developed for brittle materials subjected to monotonic uniaxial loading. The material is represented by a set of brittle linear-elastic springs of equal stiffness that ...
    • Nonlinear Behavior of Composite Columns under Varying Load Histories 

      A. Dall'Asta (American Society of Civil Engineers, 1996)
      Slender composite concrete-steel and reinforced concrete (RC) columns may be subject to instability and their failure is strongly related to their previous load histories. Viscosity, plasticity, and cracking, in fact, ...
    • Optimal Polynomial Control of Seismically Excited Linear Structures 

      Anil K. Agrawal; Jann N. Yang (American Society of Civil Engineers, 1996)
      In this paper, an optimal nonlinear control law that is polynomial in terms of the states of the system is proposed for limiting the peak response of seismic-excited buildings. A performance index that is quadratic in ...
    • Buckling Modes at Coincident Singularities of Stiffness Matrix 

      Igor Raskin; John Roorda (American Society of Civil Engineers, 1996)
      When the exact differential equation is used to obtain the stiffness coefficients for an axially loaded beam element, the entries of the stiffness matrix of a frame with such elements are complex functions of the load ...
    • Modified Bang-Bang Control Law for Structural Control Implementation 

      Z. Wu; T. T. Soong (American Society of Civil Engineers, 1996)
      Linear quadratic regulator (LQR) formulation has been used extensively in many control systems designed for structural control applications due to its stability and robustness. However, recent results obtained from simulation, ...
    • Tuned Mass Dampers for Structures with Bilinear Hysteresis 

      Masato Abé (American Society of Civil Engineers, 1996)
      A design method of tuned mass dampers (TMDs) for structures with bilinear hysteresis subject to harmonic excitation is proposed. Conventional TMDs fail to control a bilinear structure as the equivalent natural frequency ...
    • Simulation of Ergodic Multivariate Stochastic Processes 

      George Deodatis (American Society of Civil Engineers, 1996)
      A simulation algorithm is proposed to generate sample functions of a stationary, multivariate stochastic process according to its prescribed cross-spectral density matrix. If the components of the vector process correspond ...
    • Heuristic-Based Algorithm for Active Control 

      Yu Tang (American Society of Civil Engineers, 1996)
      A simple effective control algorithm, free from the problem of time delay, is proposed. It is a closed-open loop control. The control force is applied to the structure at the current time to cancel the portion of the system ...
    • Buckling Analysis of Curved Beams by Finite-Element Discretization 

      Chai H. Yoo; Young J. Kang; James S. Davidson (American Society of Civil Engineers, 1996)
      Recently, an extensive theoretical investigation on the buckling and large-displacement behavior of thin-walled circular beams was reported in a two-paper series. Equilibrium equations governing the linear, bifurcation ...
    • Bicycle-Wheel Spoke Patterns and Spoke Fatigue 

      Henri P. Gavin (American Society of Civil Engineers, 1996)
      The radial, lateral, and tangential stiffness of spoked bicycle wheels depends upon the rim's bending inertia, torsional inertia, the spoke sizes, and the spoke geometry. The spokes of three rear bicycle wheels of different ...
    • Griffith Energy Balance Model for Crack-Growth Prediction in Reinforced Concrete 

      Kamel Ben Amara (American Society of Civil Engineers, 1996)
      A new method based on the Griffith energy balance postulate for brittle fracture is developed in the continuum thermodynamics framework to find a beam model for crack growth in plain and reinforced concrete sections. The ...
    • Nonlinear Rocking Motions. II: Overturning under Random Excitations 

      H. Lin; S. C. S. Yim (American Society of Civil Engineers, 1996)
      Rocking responses of rigid objects under combined deterministic and stochastic excitations of arbitrary relative intensities are examined from a fully probabilistic perspective. The associated Fokker-Planck equation is ...
    • Rule-Based Control Algorithm for Active Tuned Mass Dampers 

      Masato Abé (American Society of Civil Engineers, 1996)
      A rule-based control algorithm for active tuned mass dampers (TMDs) is proposed. First, perturbation solutions of the linear quadratic regulator (LQR) feedback gains for the active TMD system are derived. Using these ...