Now showing items 3481-3500 of 7001

    • Kinematic and Dynamic Characteristics of Pulsatile Flows in Stenotic Vessels 

      Tin-Kan Hung; Tommy M.-C. Tsai (American Society of Civil Engineers, 1997)
      Nonlinear pulsatile blood flows in distensible vessels were calculated using an implicit finite-difference scheme. The time-dependent wavy lumen was mapped to a fixed rectangular domain. The transient geometric, kinematic, ...
    • Effective Elastoplastic Algorithms for Ductile Matrix Composites 

      J. W. Ju; K. H. Tseng (American Society of Civil Engineers, 1997)
      A three-dimensional computational algorithm is proposed to implement the micromechanical framework derived by the writers. The proposed formulation is capable of predicting effective elastoplastic behavior of two-phase ...
    • Theory of Crack Spacing in Concrete Pavements 

      Ann Ping Hong; Yuan Neng Li; Zdeněk P. Bažant (American Society of Civil Engineers, 1997)
      A simple analytical model is developed to predict the average crack spacing and crack depth in highway pavements due to thermal loading. The pavement is modeled as a beam on a Winkler elastic foundation. The effect of ...
    • Comparisons of Concrete Fracture Models 

      Jung-Heum Yon; Neil M. Hawkins; Albert S. Kobayashi (American Society of Civil Engineers, 1997)
      Fracture properties for linear elastic fracture mechanics (LEFM), singular-fracture process zone (S-FPZ), and nonsingular-fracture process zone (NS-FPZ) models were determined from the experimental results of three-point ...
    • Constitutive Model for 3D Cyclic Analysis of Concrete Structures 

      Toader A. Balan; Filip C. Filippou; Egor P. Popov (American Society of Civil Engineers, 1997)
      A three-dimensional (3D) concrete material model for nonlinear finite-element analysis of concrete solids under short-term cyclic loading is presented. The proposed model is a hypoplastic orthotropic model based on a ...
    • Acoustic Emission Source Location Using Lamb Wave Modes 

      A. K. Maji; D. Satpathi; T. Kratochvil (American Society of Civil Engineers, 1997)
      This paper describes the development of a technique based on acoustic emission (AE) technology that can be used for global nondestructive evaluation (NDE) of steel structures. This will also be useful for the subsequent ...
    • Size Effect in Compression Fracture: Splitting Crack Band Propagation 

      Zdeněk P. Bažant; Yuyin Xiang (American Society of Civil Engineers, 1997)
      A simplified fracture-mechanics-based model of compression failure of centrically or eccentrically loaded quasi-brittle columns is presented and the size effect on the nominal strength of a column is predicted. Failure is ...
    • Response Cumulant Equations for Dynamic Systems under Delta-Correlated Processes 

      Sau-Lon James Hu (American Society of Civil Engineers, 1997)
      This paper develops response cumulant differential equations (CDEs) that can be used to calculate response cumulants for dynamic systems under non-Gaussian, delta-correlated excitations. The derived CDEs apply to both ...
    • Pinpointing Bifurcation Points and Branch-Switching 

      Fumio Fujii; Shigenobu Okazawa (American Society of Civil Engineers, 1997)
      Bifurcation points require a special treatment in computational stability analysis of nonlinear structures. Tracing of the nonlinear equilibrium response, pinpointing of stability points and branch-switching are the foremost ...
    • New Definition of Conservative Internal Moments in Space Frames 

      Lip H. Teh; Murray J. Clarke (American Society of Civil Engineers, 1997)
      There have been controversy and uncertainties surrounding the rotational behavior of conservative internal bending moments in three-dimensional frames. The two contesting representations of conservative internal bending ...
    • Propagation of Waves in Rate-Dependent Plastic Softening Rod and Beam 

      Xin-Sheng Xu; Tong-Xi Yu; Xian-Yue Su (American Society of Civil Engineers, 1997)
      The propagation of waves in rods and beams made of rate-dependent softening material is studied in this paper. For rate-dependent materials the governing equation indicates that in the softening state, stress waves may ...
    • Closure to “Rate Dependent Damage Model for Concrete in Dynamics” by Jean‐François Dubé, Gilles Pijaudier‐Cabot, and Christian La Borderie 

      Jean‐François Dubé; Gilles Pijaudier‐Cabot; Christian La Borderie (American Society of Civil Engineers, 1997)
    • Reversal in Failure Scaling Transition of Fibrous Composites 

      Alberto Carpinteri; Roberta Massabó (American Society of Civil Engineers, 1997)
      A nonlinear fracture mechanics model is proposed for analysis of the flexural behavior of brittle-matrix composites with uniformly distributed secondary phases. In accordance with the Barenblatt-Dugdale model the bridging ...
    • Sequential Prediction-Error Method for Structural Identification 

      Chung-Bang Yun; Hyeong-Jin Lee; Chang-Gun Lee (American Society of Civil Engineers, 1997)
      Time-domain methods for the identification of linear structural dynamic systems are studied. The stochastic autoregressive and moving average (ARMAX) model is used to process the measured excitation and response records ...
    • Dynamic Patterning of Shear Bands in Cosserat Continuum 

      J. Tejchman; W. Wu (American Society of Civil Engineers, 1997)
      Numerical simulation of patterns of shear bands in plane-strain compression tests using an elastoplastic Cosserat constitutive equation with consideration of inertia is presented. Random distribution of the material ...
    • Ritz Method for Vibration Analysis of Cylindrical Shells with Ring Stiffeners 

      C. M. Wang; S. Swaddiwudhipong; J. Tian (American Society of Civil Engineers, 1997)
      It is generally perceived that it is awkward to automate the Ritz method for structural analysis because the Ritz functions that satisfy one combination of boundary conditions cannot be used for another. To handle general ...
    • Statics Experiments on an Elastic Catenary 

      J. C. Russell; T. J. Lardner (American Society of Civil Engineers, 1997)
      A scale model of a top level guy wire of a 213 m (700 ft) tall radio navigation tower was constructed and tested. The horizontal and vertical components of the guy wire base tension were measured at a variety of wire stress ...
    • Discussion: Rate Dependent Damage Model for Concrete in Dynamics 

      J. W. Ju (American Society of Civil Engineers, 1997)
    • Analysis of Moderately Thick Circular Plates Using Differential Quadrature Method 

      J.-B. Han; K. M. Liew (American Society of Civil Engineers, 1997)
      In this paper, the axisymmetric bending analysis of moderately thick circular plates based on the Reissner-Mindlin plate theory is conducted numerically by using the differential quadrature (DQ) method. The governing ...
    • Time-Frequency and Ambiguity Function Approaches in Structural Identification 

      Paolo Bonato; Rosario Ceravolo; Alessandro De Stefano (American Society of Civil Engineers, 1997)
      In the identification and control of some structures it is important to be able to resort to special techniques that may exploit environmental excitation in normal serviceability conditions. Hence, preliminary signal ...