Journal of Engineering Mechanics: Recent submissions
Now showing items 2241-2260 of 7001
-
Nonlinear System Identification of Reinforced Concrete Steel Structure: Using Pseudodynamic Testing Data
(American Society of Civil Engineers, 2004)The research results are presented of the joint project of the National Center for Research on Earthquake Engineering (Taiwan) and Stanford University on the pseudodynamic testing of a three-story full-scale reinforced ... -
Identification of the Soil–Structure Interaction System Using Earthquake Response Data
(American Society of Civil Engineers, 2004)This paper demonstrates how system identification techniques can be successfully applied to a soil–structure interaction system using the earthquake response data. The parameters identified are the shear moduli of several ... -
Adaptive Feedback–Feedforward Control of Building Structures
(American Society of Civil Engineers, 2004)This paper proposes a combined feedback–feedforward control algorithm for reducing structural response of buildings to seismic excitations. The controller contains both feedback and feedforward components. The feedback ... -
Temperature Effect on Concrete Creep Modeled by Microprestress-Solidification Theory
(American Society of Civil Engineers, 2004)The previously developed microprestress-solidification theory for concrete creep and shrinkage is generalized for the effect of temperature (not exceeding 100°C). The solidification model separates the viscoelasticity of ... -
Hysteresis of Capillary Stress in Unsaturated Granular Soil
(American Society of Civil Engineers, 2004)Constitutive relationships among water content, matric suction, and capillary stress in unsaturated granular soils are modeled using a theoretical approach based on the changing geometry of interparticle pore water menisci. ... -
Characterization of Failure in Cross-Anisotropic Soils
(American Society of Civil Engineers, 2004)Drained true triaxial tests on dense Santa Monica Beach sand deposited with a cross-anisotropic fabric have been performed to study the failure condition in the principal stress space. The failure surface was assumed to ... -
Continuum Damage Approach to Asphalt Concrete Fatigue Modeling
(American Society of Civil Engineers, 2004)A nonlocal damage model is proposed to predict the behavior of pavement fatigue cracking. This constitutive relation has been implemented in a finite-element code, along with a self-adaptive jump-in-cycle procedure for ... -
Simple Plasticity Sand Model Accounting for Fabric Change Effects
(American Society of Civil Engineers, 2004)A simple stress-ratio controlled, critical state compatible, sand plasticity model is presented, first in the triaxial and then in generalized stress space. The model builds upon previous work of the writers, albeit the ... -
Description of Creep in Inherently Anisotropic Frictional Materials
(American Society of Civil Engineers, 2004)This paper presents a mathematical framework for modeling the creep phenomenon in frictional materials exhibiting a strong inherent anisotropy. The instantaneous time-independent response is described by invoking a plasticity ... -
Use of <i>M</i> Integral for Rubbery Material Problems Containing Multiple Defects
(American Society of Civil Engineers, 2004)An energy parameter based on the concept of the -
Stress Dilatancy and Fabric Dependencies on Sand Behavior
(American Society of Civil Engineers, 2004)A stress dilatancy model with embedded microstructural information, originally developed by the writers, is used to illustrate the pivotal importance of dilatancy and fabric on the behavior of sand. Fabric, as a second-order ... -
Sliding and Rolling Constitutive Theory for Granular Materials
(American Society of Civil Engineers, 2004)By analyzing a microelement based on four spheres, equations governing the equilibrium of the microelement are developed. By examining these equations more closely, two primary mechanisms of failure of the microelements, ... -
Three-Dimensional Finite-Element Analysis of High Damping Rubber Bearings
(American Society of Civil Engineers, 2004)A three-dimensional finite element modeling of high damping rubber bearings is studied. At first, the constitutive model of high damping rubber materials proposed by the writers is formulated in order to derive the ... -
Identification and Validation of a Discrete Element Model for Concrete
(American Society of Civil Engineers, 2004)The use of a three-dimensional discrete element method (DEM) is proposed to study concrete structures submitted to dynamic loading. The aim of this paper is to validate the model first in the quasistatic domain, and second ... -
Identification of Natural Frequencies and Dampings of In Situ Tall Buildings Using Ambient Wind Vibration Data
(American Society of Civil Engineers, 2004)An accurate prediction for the response of tall buildings subject to strong wind gusts or earthquakes requires the information of in situ dynamic properties of the building, including natural frequencies and damping ratios. ... -
Damage Modeling of Saturated Rocks in Drained and Undrained Conditions
(American Society of Civil Engineers, 2004)A new anisotropic damage model is proposed to describe the mechanical and poromechanical behavior of brittle rocks in drained and undrained conditions. Although phenomenological, the model is based on physical grounds of ... -
Experimental Inspiration for Kinematic Hardening Soil Models
(American Society of Civil Engineers, 2004)Traditional techniques for identifying yielding of soils in the context of classical elastic–plastic soil models are criticized. However, the extended use of such procedures starts to reveal the kinematic nature of the ... -
Controlling Wind Response through a Fuzzy Controller
(American Society of Civil Engineers, 2004)The aim of this paper is to discuss the adoption of a fuzzy controller for the reference system proposed in the benchmark problem covering the wind response control of a tall building. The writers approach the problem by ... -
Asymptotic Approach for Thermoelastic Analysis of Laminated Composite Plates
(American Society of Civil Engineers, 2004)A thermoelastic model for analyzing laminated composite plates under both mechanical and thermal loadings is constructed by the variational asymptotic method. The original three-dimensional nonlinear thermoelasticity problem ... -
Generalized Linear Quadratic Gaussian Techniques for the Wind Benchmark Problem
(American Society of Civil Engineers, 2004)This paper presents a comprehensive study of the stage-3 benchmark problem for response control of wind-excited tall buildings based on the linear quadratic gaussian (LQG) approach, and on its generalization, the