Journal of Engineering Mechanics: Recent submissions
Now showing items 2081-2100 of 7001
-
Application of Differential Operator with Servo-Order Function in Model of Viscoelastic Deformation Process
(American Society of Civil Engineers, 2005)The aim of the present paper is the application of a differential operator of variable order in constitutive relations for viscoelastic material. The dependence of the order function on the strain and strain rate is evaluated ... -
Simulation of Multivariate Stationary Gaussian Stochastic Processes: Hybrid Spectral Representation and Proper Orthogonal Decomposition Approach
(American Society of Civil Engineers, 2005)By observing that the optimal basis for the proper orthogonal decomposition (POD) can be obtained from the cross power spectral density (XPSD) matrix of a multivariate stationary Gaussian stochastic process, the computational ... -
Theoretical Modeling of Signal Loss versus Crack Opening for a Novel Crack Sensor
(American Society of Civil Engineers, 2005)The degradation of concrete structures is always accompanied by the formation of cracks. Crack monitoring is hence useful in assessing the “health condition” of the structure. In our previous investigation on an optical-fiber ... -
Stochastic Response of a Random Mass Structure
(American Society of Civil Engineers, 2005)This paper proposes a polynomial approximation approach for the estimation of the stochastic response of a random mass structure subjected to an evolutionary random excitation. A bounded, monopeak, and symmetrically ... -
Multivariate Extreme Value Distributions for Random Vibration Applications
(American Society of Civil Engineers, 2005)The problem of determining the joint probability distribution of extreme values associated with a vector of stationary Gaussian random processes is considered. A solution to this problem is developed by approximating the ... -
Low-Velocity Impact Dynamic Behavior of Laminated Composite Nonprismatic Folded Plate Structures
(American Society of Civil Engineers, 2005)In this paper, the higher-order shear deformation theory is used to study the response of graphite/epoxy laminated composite nonprismatic folded plates subjected to impact loads. A finite-element model of the theory is ... -
Oblique Impact of Water Waves on Thin Porous Walls
(American Society of Civil Engineers, 2005)There is a paradoxical phenomenon in earlier studies when the incoming water wave is parallel to a porous breakwater, the water wave permeates completely without regard to the largeness of the the porosity of the porous ... -
Stability of the World Trade Center Twin Towers Structural Frame in Multiple Floor Fires
(American Society of Civil Engineers, 2005)This technical note presents the results from a nonlinear finite element analysis of a very simple two dimensional model of the World Trade Center Twin-Towers structural frame subjected to fire. The analysis was carried ... -
Dynamic Spar Elements and Discrete Element Methods in Two Dimensions for the Modeling of Soil-Inclusion Problems
(American Society of Civil Engineers, 2005)Discrete element methods (DEMs) provide new numerical means to study the behavior of soil-inclusion systems. In some cases, however, the classic DEM fails to model specific aspects of the inclusions. That is why a model ... -
Substructure Simulation of Inhomogeneous Track and Layered Ground Dynamic Interaction under Train Passage
(American Society of Civil Engineers, 2005)The vibrations in track and ground induced by train passages are investigated by the substructure method with due consideration to dynamic interaction between an inhomogeneous track system comprising continuous rails and ... -
Mixed Integer Nonlinear Least-Squares Problem for Damage Detection in Truss Structures
(American Society of Civil Engineers, 2005)We present a mixed integer nonlinear least-squares problem for identifying damage in truss structures from their measured response. In detecting damage based on parameter estimation, the number of unknown parameters is ... -
Prediction of Damage Behaviors in Asphalt Materials Using a Micromechanical Finite-Element Model and Image Analysis
(American Society of Civil Engineers, 2005)A study of the micromechanical damage behavior of asphalt concrete is presented. Asphalt concrete is composed of aggregates, mastic cement, and air voids, and its load carrying behavior is strongly related to the local ... -
Advanced Analysis of Imperfect Portal Frames with Semirigid Base Connections
(American Society of Civil Engineers, 2005)A robust finite element procedure for large deflection and inelastic analysis of imperfect steel frames with semirigid base is proposed and the nonlinear behavior of semirigid frames with various modes of initial imperfection ... -
Instability and Complete Failure of Steel Columns Subjected to Cyclic Loading
(American Society of Civil Engineers, 2005)In a testing system design for large deformations, structural columns were loaded to complete failure, defined as either complete separation of the column or inability to sustain the prescribed axial load. The test system ... -
Design of Composite Sway Building Frames for Global Instability
(American Society of Civil Engineers, 2005)is the European design code for composite construction; in its so-called ENV version, the scope is limited to “nonsway buildings” with efficient bracing systems. Therefore, it gives mainly rules to analyze and to check ... -
Lateral–Torsional Buckling of Singly Symmetric Tapered Beams: Theory and Applications
(American Society of Civil Engineers, 2005)A general variational formulation to analyze the elastic lateral–torsional buckling (LTB) behavior of singly symmetric thin-walled tapered beams is presented, numerically implemented, validated and illustrated. It (1) ... -
Spatial Rotation Kinematics and Flexural–Torsional Buckling
(American Society of Civil Engineers, 2005)This paper aims to clarify the intricacies of spatial rotation kinematics as applied to three-dimensional (3D) stability analysis of metal framed structures with minimal mathematical abstraction. In particular, it discusses ... -
Effects of the Loading History on the Local Buckling Behavior and Failure Mode of Welded Beam-to-Column Joints in Moment-Resisting Steel Frames1
(American Society of Civil Engineers, 2005)The cyclic behavior of welded beam-to-column joints for moment-resisting steel frames was assessed by constant amplitude cyclic quasi-static tests. Reanalysis of the results showed that the failure mode of the joints ... -
Asymptotic-Numerical Method to Analyze the Postbuckling Behavior, Imperfection-Sensitivity, and Mode Interaction in Frames
(American Society of Civil Engineers, 2005)The paper presents the formulation and illustrates the application of an asymptotic-numerical (semianalytical) method to analyze the geometrically nonlinear behavior of plane frames. The method adopts an “internally ... -
Explosion and Fire Analysis of Steel Frames Using Mixed Element Approach
(American Society of Civil Engineers, 2005)This paper presents a mixed element approach for analyzing steel frame structures subjected to a localized explosion and followed by fire. Critical members that are subjected to direct action of explosion and fire are ...