Journal of Engineering Mechanics: Recent submissions
Now showing items 1841-1860 of 7001
-
Mechanics of Progressive Collapse: Learning from World Trade Center and Building Demolitions
(American Society of Civil Engineers, 2007)Progressive collapse is a failure mode of great concern for tall buildings, and is also typical of building demolitions. The most infamous paradigm is the collapse of the World Trade Center towers. After reviewing the ... -
Global and Local Buckling of a Sandwich Beam
(American Society of Civil Engineers, 2007)A two-dimensional mechanical model is developed to predict the global and local buckling of a sandwich beam, using classical elasticity. The face sheet and the core are assumed as linear elastic isotropic continua in a ... -
Nonlinear Signal Analysis: Time-Frequency Perspectives
(American Society of Civil Engineers, 2007)Recently, there has been growing utilization of time-frequency transformations for the analysis and interpretation of nonlinear and nonstationary signals in a broad spectrum of science and engineering applications. The ... -
Multivariate Distributions with Specified Marginals: Applications to Wind Engineering
(American Society of Civil Engineers, 2007)Bounds on and approximations of the distribution of a non-Gaussian vector -
Prediction of Creep Stiffness of Asphalt Mixture with Micromechanical Finite-Element and Discrete-Element Models
(American Society of Civil Engineers, 2007)This study presents micromechanical finite-element (FE) and discrete-element (DE) models for the prediction of viscoelastic creep stiffness of asphalt mixture. Asphalt mixture is composed of graded aggregates bound with ... -
Damage Identification on the Tilff Bridge by Vibration Monitoring Using Optical Fiber Strain Sensors
(American Society of Civil Engineers, 2007)Vibration testing is a well-known practice for damage identification of civil engineering structures. The real modal parameters of a structure can be determined from the data obtained by tests using system identification ... -
Interaction of Nonlinear Progressive Waves with Two Serially Arranged Submerged Obstacles
(American Society of Civil Engineers, 2007)The purpose of the present study is to develop a numerical model for the investigation of water waves propagating over a pair of impermeable submerged obstacles. The mathematic model is formulated by coupling solutions of ... -
Direct Numerical Simulation of Turbulent Flow in a Square Duct: Analysis of Secondary Flows
(American Society of Civil Engineers, 2007)A direct numerical simulation of turbulent flow in a square duct was performed for a Reynolds number based on bulk streamwise velocity and duct height equal to 4,440. The mechanism by which secondary flows are generated ... -
Spatially Averaged Turbulent Flow over Square Ribs
(American Society of Civil Engineers, 2007)A series of experiments was undertaken to assess fully rough turbulent subcritical flow over two-dimensional transverse repeated-rib roughness of varying spacing -
Three-Dimensional Nonlinear Finite-Element Analysis of Gasketed Flange Joint under Combined Internal Pressure and Variable Temperatures
(American Society of Civil Engineers, 2007)Performance of a flange joint is characterized mainly due to its “strength” and “sealing capabilit.” A number of analytical and experimental studies have been conducted to study these characteristics only under internal ... -
Efficient Spreadsheet Algorithm for First-Order Reliability Method
(American Society of Civil Engineers, 2007)A new spreadsheet-cell-object-oriented algorithm for the first-order reliability method is proposed and illustrated for cases with correlated nonnormals and explicit and implicit performance functions. The new approach ... -
Optimal Discrete to Continuous Transfer for Band Limited Inputs
(American Society of Civil Engineers, 2007)Central to the discrete to continuous (d2C) time transfer of state space models is the selection of an intersample parameterization of the input. At present the zero-order hold is widely used but the premise is unnecessarily ... -
Development and Validation of a Generalized Biaxial Hysteresis Model
(American Society of Civil Engineers, 2007)Biaxial flexural interaction has been known to significantly affect, in many cases magnify, structural response in the inelastic range. Compared to uniaxial cases, the distinct characteristics of biaxial hysteresis curves ... -
Analytical Method for Pullout of Anchor from Anchor–Mortar–Concrete Anchorage System due to Shear Failure of Mortar
(American Society of Civil Engineers, 2007)Depending on the relevant material properties, failure of grouted anchors can take forms of pullout of concrete cones, debonding at either anchor–grout or grout–concrete interface, fracture of anchor and combination of ... -
Large-Deflection Stability of Slender Beam-Columns with Both Ends Partially Restrained against Rotation
(American Society of Civil Engineers, 2007)The large-deflection analysis and postbuckling behavior of laterally braced or unbraced slender beam columns of symmetrical cross section subjected to end loads (forces and moments) with both ends partially restrained ... -
Turbulence Characteristics of Open-Channel Flow with Bed Suction
(American Society of Civil Engineers, 2007)The influence of bed suction on the characteristics of turbulent open channel flow is studied in a laboratory flume using a two-component laser Doppler velocimeter. The experimental results show how bed suction significantly ... -
Random Composites Characterization Using a Classifier Model
(American Society of Civil Engineers, 2007)A new method is introduced for characterizing and analyzing materials with random heterogeneous microstructure. The method begins with classifiers which process information from high-fidelity analyses of small-sized simulated ... -
Asymptotic Prediction of Energetic-Statistical Size Effect from Deterministic Finite-Element Solutions
(American Society of Civil Engineers, 2007)An improved form of a recently derived energetic-statistical formula for size effect on the strength of quasibrittle structures failing at crack initiation is presented and exploited to perform stochastic structural analysis ... -
Application of Structural Health Monitoring Techniques to Track Structural Changes in a Retrofitted Building Based on Ambient Vibration
(American Society of Civil Engineers, 2007)One of the issues complicating the reliability assessment of structural health monitoring (SHM) methodologies slated for implementation under field conditions for damage detection in conjunction with typical infrastructure ... -
Simultaneous Inverse Identification of Transient Thermal Properties and Heat Sources Using Sparse Sensor Information
(American Society of Civil Engineers, 2007)A study is presented herein on the simultaneous inverse identification of transient internal heat generation, transient thermal diffusivity, and constant convection coefficients. The formulations of the direct and inverse ...