Journal of Engineering Mechanics: Recent submissions
Now showing items 1701-1720 of 7001
-
Nanomechanics Modeling and Simulation of Carbon Nanotubes
(American Society of Civil Engineers, 2008)Carbon nanotubes (CNTs) have been perceived as having a great potential in nanoelectronic and nanomechanical devices. Recent advances of modeling and simulation at the nanoscale have led to a better understanding of the ... -
On-Line Learning Failure-Tolerant Neural-Aided Controller for Earthquake Excited Structures
(American Society of Civil Engineers, 2008)This paper presents an on-line learning failure-tolerant neural controller capable of controlling buildings subjected to severe earthquake ground motions. In the proposed scheme the neural controller aids a conventional -
Dynamic Thermal Buckling of Functionally Graded Spherical Caps
(American Society of Civil Engineers, 2008)In the present work, dynamic buckling behavior of clamped functionally graded spherical caps suddenly exposed to a thermal field is studied using the finite-element procedure. The material properties are graded in the ... -
Closure to “On the Comparison of Timoshenko and Shear Models in Beam Dynamics” by Noël Challamel
(American Society of Civil Engineers, 2008) -
State Estimation in Structural Systems with Model Uncertainties
(American Society of Civil Engineers, 2008)This paper presents an observer designed under the assumption that differences between predicted and measured outputs arise from discrepancies between the real structural system and the nominal model used to represent it. ... -
Stochastic Interpolation of Spatial Random Fields by BF/MCF-ISM
(American Society of Civil Engineers, 2008)In the past, interpolation of random fields was successfully treated by Kriging methods for Gaussian fields, and by conditional simulation techniques for a class of non-Gaussian translation fields. Recently, bootstrap ... -
Dynamic Fragmentation of an Ultrahigh-Strength Concrete during Edge-On Impact Tests
(American Society of Civil Engineers, 2008)To understand and model damage generated during impact by a penetrator of ultrahigh strength concrete targets, edge-on impact tests are performed with Ductal concrete, which is unreinforced or reinforced with short fibers. ... -
Coupled Creep and Seepage Model for Hybrid Media
(American Society of Civil Engineers, 2008)The permeability coefficient of a rock mass depends mainly on the aperture of the joint and the porosity of the block, which may alter with time when creep of the rock mass is taken into account. Therefore, a coupled creep ... -
Discussion of “On the Comparison of Timoshenko and Shear Models in Beam Dynamics” by Noël Challamel
(American Society of Civil Engineers, 2008) -
Effects of Train Characteristics on the Rate of Deterioration of Track Roughness
(American Society of Civil Engineers, 2008)Track roughness describes in part the up and down waves in the longitudinal geometry of a railway track. A train passing over rough track experiences a degree of bouncing that generates oscillations in the forces exerted ... -
Characteristics of Steady Horseshoe Vortex System near Junction of Square Cylinder and Base Plate
(American Society of Civil Engineers, 2008)This paper presents an experimental investigation on the characteristics of a horseshoe vortex system near the juncture of a square cylinder and a horizontal base plate, using particle image velocimetry and flow visualization ... -
Reliability-Based Performance Objectives and Probabilistic Robustness in Structural Control Applications
(American Society of Civil Engineers, 2008)A reliability-based structural control design approach is presented that optimizes a control system explicitly to minimize the probability of structural failure. Failure is interpreted as the system’s state trajectory ... -
Progressive Collapse of the World Trade Center: Simple Analysis
(American Society of Civil Engineers, 2008)The collapse behavior of the World Trade Center towers is considered formally as a propagating instability phenomenon. The application of associated concepts enables the residual capacities of both towers after the onset ... -
Sensitivity of Seismic Applications to Different Shape Memory Alloy Models
(American Society of Civil Engineers, 2008)Shape memory alloys (SMAs) are known for their superelastic properties, which have been exploited in numerous applications in the biomedical, aerospace, and commercial fields. More recently, these materials have been ... -
Bed-Shear Stress Characteristics of a Simple, Prismatic, Rectangular Channel
(American Society of Civil Engineers, 2008)This paper examines the use of data obtained from large eddy simulations in exploring the instantaneous characteristics of boundary shear stress. The probability density functions (PDF) of the shear stress are shown to be ... -
Closed-Form Solutions for Vibrations of Nearly Vertical Strings and Beams by Means of Asymptotic Methods
(American Society of Civil Engineers, 2008)Top tensioned strings and beams are often used in civil and marine applications. Typically these members have constant cross sections, and a pronounced, usually linear, tension variation, due to the effects of gravity. In ... -
Seismic Energy Dissipation of Inelastic Structures with Tuned Mass Dampers
(American Society of Civil Engineers, 2008)The energy transfer process of using a tuned mass damper (TMD) in improving the ability of inelastic structures to dissipate earthquake input energy is investigated. Inelastic structural behavior is modeled by using the ... -
Linearized Stability and Accuracy for Step-by-Step Solutions of Certain Nonlinear Systems
(American Society of Civil Engineers, 2008)In this work, stability and accuracy of the Newmark method for nonlinear systems are obtained from a linearized analysis. This analysis reveals that an unconditionally stable integration method for linear elastic systems ... -
Nonstationary Response Analysis of Long Span Bridges under Spatially Varying Differential Support Motions Using Continuous Wavelet Transform
(American Society of Civil Engineers, 2008)An input-output relation for the nonstationary response of long-span bridges subjected to random differential support motions is proposed in the present study. The proposed methodology is more general than the existing ... -
Boundary Finite-Element Method Coupling Finite-Element Method for Steady-State Analyses of Dam-Reservoir Systems
(American Society of Civil Engineers, 2008)The boundary finite-element method (BFEM) is extended for steady-state analyses of dam-reservoir system problems. In this study, the dam is assumed to be rigid and subjected to horizontal ground motions, and the liquid in ...