Now showing items 1641-1660 of 7001

    • Performance of a Rollover Protective Structure for a Bulldozer 

      D. P. Thambiratnam; B. J. Clark; N. J. Perera (American Society of Civil Engineers, 2009)
      Rollover protective structures (ROPS) are safety devices fitted to heavy vehicles to provide protection to the operator during an accidental rollover. At present, ROPS design standards require full-scale destructive testing, ...
    • Cable Modal Parameter Identification. II: Modal Tests 

      Wei-Xin Ren; Wei-Hua Hu (American Society of Civil Engineers, 2009)
      The cable dynamic stiffness describes the load–deformation behavior that reflects the cable intrinsic dynamic characteristics. It is defined as a ratio of response to excitation and represents a very similar frequency ...
    • Cable Modal Parameter Identification. I: Theory 

      Wei-Xin Ren; Wei-Hua Hu (American Society of Civil Engineers, 2009)
      Cable modal parameters (natural frequencies and damping ratios) that represent the cable inherent dynamic characteristics play an important role in the construction, vibration control, condition assessment, and long-term ...
    • Full Two-Dimensional Model for Rolling Resistance. II: Viscoelastic Cylinders on Rigid Ground 

      Xiangjun Qiu (American Society of Civil Engineers, 2009)
      Following the previous paper, “Full two-dimensional model for rolling resistance: Hard cylinder on viscoelastic foundation of finite thickness,” addressing modeling of rigid cylinder rolling against viscoelastic foundation ...
    • Finite Elements on Generalized Elastic Foundation in Timoshenko Beam Theory 

      Gelu Onu (American Society of Civil Engineers, 2008)
      Using the Vlasov foundation model, a modified approach of the continuous beam on elastic supports, leading to both a mechanical model and the proper foundation parameters of the generalized foundation is shown. Two ...
    • Asymmetric Dynamic Green’s Functions in a Two-Layered Transversely Isotropic Half-Space 

      Ali Khojasteh; Mohammad Rahimian; Ronald Y. S. Pak; Morteza Eskandari (American Society of Civil Engineers, 2008)
      By virtue of a complete representation using two displacement potentials, an analytical derivation of the elastodynamic Green’s functions for a transversely isotropic layer underlain by a transversely isotropic half-space ...
    • Question of Tension Softening versus Tension Stiffening in Plain and Reinforced Concrete 

      Bernd Koeberl; Kaspar Willam (American Society of Civil Engineers, 2008)
      Stress transfer from concrete into steel is one of the fundamental mechanisms behind the significant ductility of reinforced concrete. Considering the low value of cracking strain of plain concrete, it is the stress transfer ...
    • Advanced Boundary Element Analysis of Three-Dimensional Elastic Solids with Fiber Reinforcements 

      J. Chatterjee; F. Ma; D. P. Henry; P. K. Banerjee (American Society of Civil Engineers, 2008)
      An advanced boundary element methodology for the analysis of three-dimensional fiber-reinforced elastic solids using the concept of fiber elements has been presented in this paper as an extension of the earlier work of ...
    • Experimental Investigation of Flow Past a Square Cylinder at an Angle of Incidence 

      Sushanta Dutta; P. K. Panigrahi; K. Muralidhar (American Society of Civil Engineers, 2008)
      Flow past a square cylinder placed at an angle to the incoming flow is experimentally investigated using particle image velocimetry, hot wire anemometry, and flow visualization. The Reynolds number based on cylinder size ...
    • Mode II Fracture Localization in Concrete Loaded in Compression 

      Jan G. van Mier (American Society of Civil Engineers, 2009)
      As an alternative to a series-coupling model for localization of deformations under uniaxial and confined compression, an approach based on Mode II crack growth is proposed. Such a model appears to be in closer agreement ...
    • Probabilistic Models and Simulation of Irregular Masonry Walls 

      Seymour M. J. Spence; Massimiliano Gioffrè; Mircea D. Grigoriu (American Society of Civil Engineers, 2008)
      A method is proposed for generating samples of irregular masonry walls that capture the essential statistics of a given population. The method first entails characterizing the geometry of scaled star-like inclusions by ...
    • Cohesive Interface Modeling of Debonding Failure in FRP Strengthened Beams 

      Oded Rabinovitch (American Society of Civil Engineers, 2008)
      A theoretical model that incorporates the concept of the cohesive interface approach for the debonding analysis of reinforced concrete beams strengthened with externally bonded fiber reinforced polymer (FRP) strips is ...
    • Monte Carlo Methods for Estimating the Extreme Response of Dynamical Systems 

      A. Naess; O. Gaidai (American Society of Civil Engineers, 2008)
      The development of simple accurate, and efficient methods for estimation of the extreme response of dynamical systems subjected to random excitations is discussed in the present paper. The key quantity for calculating the ...
    • Axisymmetric Stress Analysis of a Thick Conical Shell with Varying Thickness under Nonuniform Internal Pressure 

      H. R. Eipakchi; S. E. Khadem; G. H. Rahimi S. (American Society of Civil Engineers, 2008)
      A mathematical approach based on the perturbation theory has been used for axisymmetric stress analysis of a thick conical shell with varying thickness under nonuniform internal pressure. The equilibrium equations have ...
    • Are Deicing Salts Necessary to Promote Scaling in Concrete? 

      Antonin Fabbri; Olivier Coussy; Teddy Fen-Chong; Paulo J. Monteiro (American Society of Civil Engineers, 2008)
      The main purpose of the present study is to investigate the role of the material parameters such as permeability, thermal diffusivity, and pore size distribution on the mechanical behavior of cementitious structures submitted ...
    • On Mechanical Degradation of Reinforced Concrete Affected by Alkali-Silica Reaction 

      A. Winnicki; S. Pietruszczak (American Society of Civil Engineers, 2008)
      In this paper a constitutive relation is developed for reinforced concrete subjected to a continuing alkali-silica reaction. The chemo-mechanical interaction is described within the framework of chemo-plasticity. The ...
    • Simple Model for Directional Distortional Hardening in Metal Plasticity within Thermodynamics 

      Heidi P. Feigenbaum; Yannis F. Dafalias (American Society of Civil Engineers, 2008)
      Directional distortion, observed in many experiments on various types of metals, refers to the formation of a region of high curvature (sharpening) on the yield surface approximately in the direction of loading, and a ...
    • Seismic Protection of a Building Complex Using Variable Friction Damper: Experimental Investigation 

      Y. L. Xu; C. L. Ng (American Society of Civil Engineers, 2008)
      This study presents an experimental investigation of seismic control of a building complex using variable friction damper. The laboratory-scale building complex was composed of a 12-story building and a three-story podium ...
    • Two-Dimensional Nonlinear Analysis of Long Cables 

      C. V. Girija Vallabhan (American Society of Civil Engineers, 2008)
      A simple finite-difference iterative model is presented here for the nonlinear analysis of a long inclined cable due to its self-weight and other concentrated loads in between. The input requires the end coordinates, area ...
    • Ultimate State of Samples of Ellipsoids under Different Stress Paths 

      Tang-Tat Ng (American Society of Civil Engineers, 2008)
      The ultimate state of granular material was investigated by the discrete element method. This paper discusses a series of numerical triaxial tests on samples of two kinds of ellipsoids. Samples of three different densities ...