Journal of Engineering Mechanics: Recent submissions
Now showing items 1541-1560 of 7001
-
Plastic-Buckling of Rectangular Plates under Combined Uniaxial and Shear Stresses
(American Society of Civil Engineers, 2009)This paper is concerned with the plastic-buckling of rectangular plates under uniaxial compressive and shear stresses. In the prediction of the plastic-buckling stresses, we have adopted the incremental theory of plasticity ... -
Model for Reinforced Concrete Members under Torsion, Bending, and Shear. I: Theory
(American Society of Civil Engineers, 2009)A model has been developed that can predict the load-deformation response of a reinforced concrete (RC) member subjected to torsion combined with bending and shear to spalling or ultimate capacity. The model can also be ... -
Externally Reinforced Welded I-Beam-to-Box-Column Seismic Connection
(American Society of Civil Engineers, 2010)This paper presents an externally reinforced I-beam-to-box-column seismic connection. An inclined rib-plated collar-plated configuration with web plates is used to ensure planar continuity between I-beam and box-column ... -
Model for Reinforced Concrete Members under Torsion, Bending, and Shear. II: Model Application and Validation
(American Society of Civil Engineers, 2009)A model was recently proposed for predicting the load-deformation response of a reinforced concrete member under torsion combined with bending and shear to spalling or ultimate. This paper shows the application of the model ... -
Reduction-Based Model Updating of a Scaled Offshore Platform Structure
(American Society of Civil Engineers, 2010)This paper attempts to develop a reduction-based model updating technique for jacket offshore platform structure. A reduced model is used instead of the direct finite-element model of the real structure in order to circumvent ... -
Free Vibration of Three-Dimensional Orthotropic Uniform Shear Beam-Columns with Generalized End Conditions
(American Society of Civil Engineers, 2009)The free vibration analysis of asymmetrical three-dimensional (3D) uniform shear beam-columns with generalized boundary conditions (semirigid flexural and torsional restraints, lateral bracings, and lumped masses at both ... -
Dynamic Axial-Moment Buckling of Linear Beam Systems by Power Series Stiffness
(American Society of Civil Engineers, 2009)The paper applies the power series method to find the dynamic stiffness for the dynamics axial-moment buckling analyses of linear framed structures. Since the formulation is exact in classical sense, one element is good ... -
Toward an Improvement in the Identification of Bridge Deck Flutter Derivatives
(American Society of Civil Engineers, 2009)This paper presents a short review of the state-of-the-art methods to identify bridge deck flutter derivatives and proposes a new algorithm to simultaneously extract the aeroelastic coefficients from free-vibration ... -
Application of Proper Orthogonal Decomposition Method in Wind Field Simulation for Roof Structures
(American Society of Civil Engineers, 2009)The weighted-amplitude wave superposition method and the proper orthogonal decomposition (POD) technique are first introduced. Then the POD technique combined with a wind field reconstruction method for a flat roof is ... -
Scattering of SH Waves by Truncated Semicircular Canyon
(American Society of Civil Engineers, 2009)The judicious region-matching technique is adopted to derive a series solution for shear horizontal waves scattering from a truncated semicircular canyon on the ground surface. A circular-arc auxiliary boundary is introduced ... -
Cross Correlations of Modal Responses of Tall Buildings in Wind-Induced Lateral-Torsional Motion
(American Society of Civil Engineers, 2009)Recent trends towards developing increasingly taller and irregularly-shaped buildings imply that these complex structures are potentially more responsive to wind excitation. Making accurate predictions of wind loads and ... -
Coupling Behavior of Wire Ropes Subjected to Tensile Impulses
(American Society of Civil Engineers, 2009)To determine the stress state of a wire rope is tedious although analytical solution of a simple rope subjected to static load is available. While facing the problems involving complex ropes, it is usual practice to take ... -
Bridge Structural Condition Assessment Based on Vibration and Traffic Monitoring
(American Society of Civil Engineers, 2009)A stochastic model of traffic excitation on bridges is developed assuming that the arrival of vehicles traversing a bridge (modeled as an elastic beam) follows a Poisson process, and that the contact force of a vehicle on ... -
Modal Identification through Ambient Vibration: Comparative Study
(American Society of Civil Engineers, 2009)An analytical comparison between three techniques for the identification of modal properties of structures when subjected to ambient vibrations is performed. The algorithms examined include the eigensystem realization ... -
Modeling of Flow in Three-Dimensional, Multizone, Anisotropic Porous Media with Weakly Singular Integral Equation Method
(American Society of Civil Engineers, 2009)A symmetric Galerkin boundary element method is developed for modeling steady-state Darcy’s flow in three-dimensional porous media. The proposed technique is capable of treating a nonhomogeneous medium that consists of ... -
Effect of Transitions on Flow past a Square Cylinder at Low Reynolds Number
(American Society of Civil Engineers, 2009)Numerical simulations have been performed for three-dimensional flow past a square cylinder. The cylinders are placed normal to the incoming uniform flow. The results are based on higher order spatial and temporal ... -
Micro-Macro Quantification of the Internal Structure of Granular Materials
(American Society of Civil Engineers, 2009)We have attempted a multiscale quantification of the internal structure of granular materials. The internal structure of granular materials, i.e., the geometrical information on granular particles and their spatial ... -
Well-Balanced Bottom Discontinuities Treatment for High-Order Shallow Water Equations WENO Scheme
(American Society of Civil Engineers, 2009)A finite volume well-balanced weighted essentially nonoscillatory (WENO) scheme, fourth-order accurate in space and time, for the numerical integration of shallow water equations with the bottom slope source term, is ... -
Discussion of “Analysis of the Vertical Profile of Concentration in Sediment-Laden Flows” by Q. Q. Liu, A. P. Shu, and V. P. Singh
(American Society of Civil Engineers, 2009) -
Simple Single-Surface Failure Criterion for Concrete
(American Society of Civil Engineers, 2009)This technical note presents a new single-surface failure criterion for concrete that is derived using an approach developed for geologic materials. The main advantage of the proposed failure criterion is its simplicity ...