Journal of Engineering Mechanics: Recent submissions
Now showing items 1281-1300 of 7001
-
Flow Control of Extreme Pressure Loads Associated with Flow Separation
(American Society of Civil Engineers, 2016)Active flow control is applied at different locations over a surface-mounted prism to reduce extreme pressure coefficient and loads. Different control strategies including blowing, suction, and synthetic jets are evaluated. ... -
Performance and Protection of Base-Isolated Structures under Blast Loading
(American Society of Civil Engineers, 2016)Terrorist attacks are a growing threat worldwide. Explosive devices, the weapon of choice for a majority of these attacks, significantly threaten civilian and military personnel. Seismic ground motions are also associated ... -
Torsional-Flexural Buckling of Unevenly Battened Columns under Eccentrical Compressive Loading
(American Society of Civil Engineers, 2016)In this paper, an analytical model is developed to determine the torsional-flexural buckling load of a channel column braced by unevenly distributed batten plates. Solutions of the critical-buckling loads were derived for ... -
Correction for Flexural Vibration Analysis in Nonlocal Timoshenko Beams with Initial Stress
(American Society of Civil Engineers, 2016)In the present work, the flexural vibration of nonlocal Timoshenko beams under an initial stress is readdressed. The complete effect of the initial stress is taken into account in the basic formulation. The analytical ... -
Bio-Inspired Passive Optimized Base-Isolation System for Seismic Mitigation of Building Structures
(American Society of Civil Engineers, 2016)An energy dissipation mechanism of abalone shells, called sacrificial bonds and hidden length, is simulated and proposed to develop new strategies for base isolation. The concept of integrating this novel energy dispersion ... -
Statistical Damage Prognosis for In-Service Civil Structures against Hazards: Formulations and Applications
(American Society of Civil Engineers, 2016)This paper proposes an expectation-maximization (EM) algorithm embedded statistical damage prognosis paradigm for in-service civil structures against natural hazards. Being within the scope of structural health monitoring, ... -
Detection of Sinkhole Formation by Strain Profile Measurements Using BOTDR: Simulation Study
(American Society of Civil Engineers, 2017)The sudden collapse of sinkholes in the Dead Sea area represents a serious threat to infrastructure in the area. The formation of these sinkholes has been shown to be directly correlated with the drop in the Dead Sea water ... -
Stress-Dependent Electrical Contact Resistance at Fractal Rough Surfaces
(American Society of Civil Engineers, 2017)The electrical contact resistance between contacting rough surfaces was studied under various compressive stresses. The samples considered here were isotropically roughened aluminium disks with upper and lower surfaces ... -
Micromechanical Modeling for the Deformation of Sand with Noncoaxiality between the Stress and Material Axes
(American Society of Civil Engineers, 2017)Within a micromechanical framework, a constitutive model for sand capable of predicting noncoaxiality between stress and strain increments is presented. Anisotropy of elastic and plastic material properties is considered ... -
Rapid Controllable Damper Design for Complex Structures with a Hybrid Reduced-Order Modeling/Simulation Approach
(American Society of Civil Engineers, 2016)Evaluating controllable damping designs typically requires simulation of the resulting inherently nonlinear closed-loop system because linear design strategies cannot always be reliably used. These analyses typically require ... -
Unified Anisotropic Elastoplastic Model for Sand
(American Society of Civil Engineers, 2016)This paper presents a unified approach to model the influence of fabric anisotropy and its evolution on both the elastic and plastic responses of sand. A physically based fabric tensor is employed to characterize the ... -
STRIDE for Structural Identification Using Expectation Maximization: Iterative Output-Only Method for Modal Identification
(American Society of Civil Engineers, 2016)This paper introduces structural identification using expectation maximization (STRIDE), a novel application of the expectation maximization (EM) algorithm and approach for output-only modal identification. The EM algorithm ... -
Flat Cavity Expansion: Theoretical Model and Application to the Interpretation of the Flat Dilatometer Test
(American Society of Civil Engineers, 2016)This paper presents a theoretical model for flat cavity expansion in elastic soil. By using the conformal mapping method, the nonaxisymmetric boundary value problem of flat cavity expansion is transformed from the original ... -
Retraction: Choi, J. (2014). “Influence of Track Support Stiffness of Railway Tracks on Track Impact Factor.” J. Eng. Mech., 10.1061/(ASCE)EM.1943-7889.0000744, 04014052 (Aug. 8, 2014)
(American Society of Civil Engineers, 2015) -
Cyclic Behaviors of Granular Materials under Generalized Stress Condition Using DEM
(American Society of Civil Engineers, 2015) -
Roughness-Induced Vehicle Energy Dissipation: Statistical Analysis and Scaling
(American Society of Civil Engineers, 2015)The energy dissipated in a vehicle suspension system due to road roughness affects rolling resistance and the resulting fuel consumption and greenhouse gas emission. The key parameters driving this dissipation mechanism ... -
Modeling the Compression Stiffness Degradation in Circular Elastomeric Bearings due to Fatigue
(American Society of Civil Engineers, 2016) -
Erratum for “Approximations of the Dispersion Relationship of Water Waves” by Jie Yu
(American Society of Civil Engineers, 2015) -
Analytical Model for Deck-On-Girder Composite Beam System with Partial Composite Action
(American Society of Civil Engineers, 2016)