Journal of Composites for Construction: Recent submissions
Now showing items 1681-1700 of 2137
-
Bond Strength of Near-Surface Mounted FRP Strip-to-Concrete Joints
(American Society of Civil Engineers, 2007)The retrofitting technique of near-surface mounting (NSM) fiber-reinforced polymer (FRP) bars/strips is receiving more attention recently due to a number of advantages over the externally bonded technique. However, there ... -
Novel Anchor System for CFRP Rod: Finite-Element and Mathematical Models
(American Society of Civil Engineers, 2007)An innovative wedge-anchor system with a longitudinal circular profile has been designed for gripping carbon-fiber-reinforced-polymer rods. The anchor system, consisting of a barrel, a number of wedges, and a sleeve, is ... -
Confinement of Damaged and Nondamaged Structural Concrete with FRP and TRC Sleeves
(American Society of Civil Engineers, 2007)The potential for using textiles impregnated with cement as a means for in situ strengthening and retrofit of structural concrete was explored and compared with the conventional epoxy method. Fabrics of different geometries, ... -
Thermal Compatibility and Bond Strength of FRP Reinforcement in Prestressed Concrete Applications
(American Society of Civil Engineers, 2007)Due to concerns with corrosion, the use of fiber-reinforced polymer (FRP) as a replacement to conventional steel reinforcement has greatly increased over the last decade. However, when considering thermal gradients, many ... -
Constitutive Model for Time-Dependent Behavior of FRP–Concrete Interface
(American Society of Civil Engineers, 2007)A fundamental understanding of fiber-reinforced polymer (FRP) laminate bonding behavior, including bond strength and effective bonding length, is of primary importance for the development of design guidelines and codes for ... -
Effect of Size on the Failure of Geometrically Similar Concrete Beams Strengthened in Shear with FRP Strips
(American Society of Civil Engineers, 2007)Fiber reinforced plastics (FRP) are commonly used for the strengthening of concrete members. For shear strengthening of beams, FRP strips can be bonded to the sides of the member alone, to both the sides and the bottom ... -
Bond Stress–Slip Relationship between FRP Sheet and Concrete under Cyclic Load
(American Society of Civil Engineers, 2007)Fifty-four bond specimens were subjected to cyclic bond tests to obtain the bond stress–slip relationships between the fiber reinforced polymer (FRP) sheets and concrete. The specimens were prepared in accordance with Japan ... -
Comparison between Organic and Inorganic Matrices for RC Beams Strengthened with Carbon Fiber Sheets
(American Society of Civil Engineers, 2007)The objective of this paper is to study and compare the performance of concrete beams strengthened with carbon fiber sheets bonded with inorganic and organic resin matrices. The experimental study consisted of testing two ... -
Damage Approach for the Prediction of Debonding Failure on Concrete Elements Strengthened with FRP
(American Society of Civil Engineers, 2007)In this study, experimental and numerical procedures are proposed to predict the debonding failure of concrete elements strengthened with fiber-reinforced polymers (FRPs). Such debonding is modeled as a damage process, ... -
Long-Term Compression Performance of a Pultruded GFRP Element Exposed to Concrete Pore Water Solution
(American Society of Civil Engineers, 2007)A durability study was performed on a pultruded glass fiber reinforced polymer (GFRP) compression element of a hybrid GFRP/steel joint for concrete structures. GFRP elements were immersed in alkaline pore water solutions ... -
Strengthening of Preloaded RC Beams Using Hybrid Carbon Sheets
(American Society of Civil Engineers, 2007)Reinforced concrete (RC) beams subject to service loads of 40 or 60% of steel yielding were strengthened using hybrid continuous carbon fiber sheets. The hybrid systems were made of high-strength and high-modulus carbon ... -
Behavior of FRP Strengthened Infill Walls under In-Plane Seismic Loading
(American Society of Civil Engineers, 2007)The present paper investigates the suitability and effectiveness of fiber-reinforced polymers (FRP) in strengthening and/or repairing unreinforced masonry infill walls in reinforced concrete frames which are subjected to ... -
Analytical Method for Evaluating Ultimate Torque of FRP Strengthened Reinforced Concrete Beams
(American Society of Civil Engineers, 2007)The behavior of fiber reinforced polymer (FRP) strengthened reinforced concrete beams subjected to torsional loads has not been well understood compared to other loads. Interaction of different components of concrete, ... -
Measurement of the Timoshenko Shear Stiffness. I: Effect of Warping
(American Society of Civil Engineers, 2007)Fiber-reinforced polymer (FRP) composite beams are increasingly finding use in construction. Due to their lower stiffness relative to steel sections, the design of FRP structures is usually deflection controlled. Furthermore, ... -
Mechanical and Structural Characterization of New Carbon FRP Stirrups for Concrete Members
(American Society of Civil Engineers, 2007)This paper describes an experimental program conducted to develop new carbon fiber reinforced polymer (CFRP) stirrups as shear reinforcement for concrete members. The structural behavior of the CFRP stirrups was examined. ... -
Bond Durability of Glass Fiber-Reinforced Polymer Bars Embedded in Concrete Beams
(American Society of Civil Engineers, 2007)An experimental and analytical investigation of bond durability of E-glass fiber-reinforced polymer reinforcement bars in concrete beams is presented. Beams were conditioned with sustained flexural loads in indoor, outdoor, -
Measurement of the Timoshenko Shear Stiffness. II: Effect of Transverse Compressibility
(American Society of Civil Engineers, 2007)This is the second of two papers devoted to the issue of measuring the Timoshenko shear stiffness of thin-walled composite beams. In the first paper, the effect of warping on the effective Timoshenko shear stiffness, as ... -
Rehabilitation of Cracked Aluminum Connections with GFRP Composites for Fatigue Stresses
(American Society of Civil Engineers, 2007)The original design of existing aluminum overhead sign structures (OSS) did not consider fatigue as a limit state. Cracks propagate in the welds of the connection between the main chord and branches of OSS due to fatigue ... -
Case Study: Seismic Retrofitting of a Medieval Bell Tower with FRP
(American Society of Civil Engineers, 2007)Seismic retrofitting of monument structures requires compliance with restrictive constraints related to the preservation of original artistic and structural features. Any conceived intervention must achieve structural ... -
Ductility of Reinforced Concrete Members Externally Wrapped with Fiber-Reinforced Polymer Sheets
(American Society of Civil Engineers, 2007)The effectiveness of external wrapping with fiber-reinforced polymer for enhancing the curvature ductility of lightly reinforced concrete members is investigated. Referring to members with circular transverse cross sections, ...