Journal of Composites for Construction: Recent submissions
Now showing items 1201-1220 of 2137
-
Equivalent Strip Width for FRP Superstructure Design Using Timoshenko Beam Approximation
(American Society of Civil Engineers, 2013)This paper proposes the equivalent strip width for stiffness-driven design of fiber-reinforced polymer (FRP) superstructures in slab-type bridges. To calculate the deflections for design, this paper first presents a tractable ... -
Comparative Experimental Performance of Bridge Deck Slabs with AFRP and Steel Precast Panels
(American Society of Civil Engineers, 2013)Full-depth precast concrete panels expedite the construction process, enhance the safety and quality controls, and reduce the on-site labor requirements for bridge deck slab applications. However, corrosion-induced ... -
Flexural Behaviors of ECC and Concrete/ECC Composite Beams Reinforced with Basalt Fiber-Reinforced Polymer
(American Society of Civil Engineers, 2013)The use of fiber-reinforced polymer (FRP) reinforcement in structural engineering has attracted great attention due to high tensile strength, good fatigue performance, and inherent corrosion resistance. Engineered cementitious ... -
Evaluation of Parameters of Bond Action between FRP and Concrete
(American Society of Civil Engineers, 2013)This paper presents the evaluation of parameters describing bond action between fiber-reinforced polymer (FRP) and concrete in RC structures strengthened in flexure. The parameters were evaluated on the basis of fitting ... -
Confinement Model for FRP-Confined High-Strength Concrete
(American Society of Civil Engineers, 2014)It is well understood that confining concrete with fiber-reinforced polymer (FRP) composites can significantly enhance its strength and deformability. However, the confinement demand of concrete increases proportionally ... -
Use of CFRP Overlays to Repair Fatigue Damage in Steel Plates under Tension Loading
(American Society of Civil Engineers, 2014)Fiber-reinforced polymer (FRP) overlays have been successfully used in the aerospace industry to repair fatigue damage in aluminum plates. With this success there is potential for use of similar FRP overlays to repair ... -
Quantification of Bond-Slip Relationship for Externally Bonded FRP-to-Concrete Joints
(American Society of Civil Engineers, 2013)The interfacial bond parameters are quantified and modeled in this work through experimental and analytical studies. A database comprising 628 shear tests of externally-bonded fiber reinforced polymer (FRP) joints is built ... -
Structural Strengthening with Prestressed CFRP Strips with Gradient Anchorage
(American Society of Civil Engineers, 2013)This paper presents the principle and the application of an innovative anchorage technique for prestressed carbon fiber–reinforced polymer (CFRP) strips in structural strengthening. Additionally, large-scale static loading ... -
Hybrid Confinement of Concrete by Fiber-Reinforced Polymer Sheets and Fiber Ropes under Cyclic Axial Compressive Loading
(American Society of Civil Engineers, 2013)This study looks into the mechanical behavior of concrete lightly confined by fiber-reinforced polymer (FRP) sheets made with glass fibers and by polypropylene fiber ropes (PPFRs). PPFRs have ultrahigh deformation at ... -
Composite Action of Concrete-Filled Rectangular GFRP Tubes
(American Society of Civil Engineers, 2013)This paper investigates the composite action and performance of rectangular concrete-filled glass fiber–reinforced polymer (GFRP) tubes in four-point bending. The study compares the performance of three different concrete-filled ... -
Postfatigue Monotonic Behavior of RC Beams Strengthened with Prestressed NSM CFRP Strips: Ductility Evaluation
(American Society of Civil Engineers, 2014)The flexural behavior of fatigued reinforced concrete (RC) beams strengthened using prestressed near surface mounted (NSM) carbon fiber–reinforced polymer (CFRP) strips was investigated. Five RC beams were tested; one beam ... -
Investigation of Various GFRP Shear Connectors for Insulated Precast Concrete Sandwich Wall Panels
(American Society of Civil Engineers, 2013)Glass fiber–reinforced polymer (GFRP) shear connectors provide much reduced thermal bridging in insulated concrete sandwich panels compared to steel connectors. In this study, 50 specimens with dimensions of -
Strength Reduction Factor for Flexural RC Members Strengthened with Near-Surface-Mounted Bars
(American Society of Civil Engineers, 2013)Current American Concrete Institute (ACI) guidelines for the design of flexural RC members strengthened with externally bonded fiber-reinforced polymer (FRP) systems assign an additional partial strength reduction factor ... -
Simplified Anchor System for CFRP Rods
(American Society of Civil Engineers, 2013)The increased use of carbon fiber–reinforced polymer (CFRP) rods in prestressed concrete applications has been challenged by identifying a suitable anchor system. To overcome such a challenge, the design of a simplified ... -
Resistance Factors for Ductile FRP-Reinforced Concrete Flexural Members
(American Society of Civil Engineers, 2013)To prevent damage caused by corroding reinforcement, fiber-reinforced polymer (FRP) reinforcing bars have been used in place of steel in a relatively small but increasing number of structures in civil infrastructure. A ... -
Numerical Investigation on the Hysteretic Behavior of RC Joints Retrofitted with Different CFRP Configurations
(American Society of Civil Engineers, 2013)The strengthening of beam-column joints in RC structures is considered an effective approach for improving their seismic resistance and overall performance. This paper presents a numerical investigation into the effectiveness ... -
Functionality of Damaged Steel Truss Systems Strengthened with Posttensioned CFRP Tendon
(American Society of Civil Engineers, 2013)This paper presents the functionality of truss systems damaged and strengthened with carbon fiber reinforced polymer (CFRP) tendon. Sixteen damage scenarios are designed by disconnecting various web members of a laboratory-scale ... -
Benefits of Grooving on Vacuum-Assisted Resin Transfer Molding FRP Wet-Out of RC Beams
(American Society of Civil Engineers, 2013)Fiber-reinforced polymer (FRP) externally bonded to RC beams is commonly applied by hand layup. Vacuum-assisted resin transfer molding (VARTM), a novel application method in infrastructure, can produce FRP with more-consistent ... -
Seismic Behavior of RC Shear Walls Strengthened with Fiber-Reinforced Polymer
(American Society of Civil Engineers, 2013)This paper investigates the seismic behavior of RC shear walls strengthened by using carbon fiber-reinforced polymer (CFRP) composites. Three RC shear walls were tested: one control wall and two walls strengthened by ... -
Web Buckling in Pultruded Fiber-Reinforced Polymer Deep Beams Subjected to Concentrated Loads
(American Society of Civil Engineers, 2014)Five 609.5-mm deep fiber-reinforced polymer (FRP) beams with a span-to-depth ratio of