Journal of Composites for Construction: Recent submissions
Now showing items 1101-1120 of 2137
-
Bond Behavior between Near-Surface-Mounted CFRP Strips and Concrete at High Temperatures
(American Society of Civil Engineers, 2015)This paper presents an experimental study concerning the bond behavior at high temperatures between concrete and carbon fiber–reinforced polymer (CFRP) strips installed according to the near-surface-mounted (NSM) technique. ... -
Corrosion Aging of Reinforced Concrete T-Girders Strengthened with Near-Surface-Mounted Composites
(American Society of Civil Engineers, 2015)This paper discusses the effect of corrosion aging on the flexural response of reinforced concrete (RC) T-girders strengthened with near-surface-mounted (NSM) composite reinforcement. The study comprised analytical modeling ... -
Simplified Model for the Torsional Strength of Concrete Beams with GFRP Stirrups
(American Society of Civil Engineers, 2015)An international committee on shear and torsion reported that giving physical significance for the torsion design is an upcoming challenge. The purpose of this paper is to propose a reasonably accurate and relatively simple ... -
Experimental Investigation of Pullout Behavior of Fiber-Reinforced Polymer Reinforcements in Sand
(American Society of Civil Engineers, 2015)Fiber-reinforced polymer (FRP) bars and strips are potential alternatives to conventional soil reinforcements. In this aspect, two commonly used FRP materials are glass-FRP and carbon-FRP (GFRP and CFRP). However, the ... -
Shear Strength of FRP RC Beams and One-Way Slabs without Stirrups
(American Society of Civil Engineers, 2014)Due to the complex mechanism of shear behavior, most current empirical methods do not physically simulate the shear behavior as seen in practice. These approaches, therefore, cannot be directly applied to accommodate ... -
Stress-Strain Model for Fiber-Reinforced Polymer-Confined Concrete
(American Society of Civil Engineers, 2002)The design of fiber-reinforced polymer (FRP)-confined concrete members requires accurate evaluation of the performance enhancement due to the confinement provided by FRP composite jackets. A strain ductility-based model ... -
Erratum for “Buckling and Postbuckling Finite-Element Analysis of Pultruded FRP Profiles under Pure Compression” by Ferdinando Laudiero, Fabio Minghini, and Nerio Tullini
(American Society of Civil Engineers, 2014) -
Unified Stress-Strain Model for FRP and Actively Confined Normal-Strength and High-Strength Concrete
(American Society of Civil Engineers, 2015)Accurate modeling of the complete stress-strain relationship of confined and unconfined concrete is of vital importance in predicting the overall flexural behavior of reinforced concrete structures. The analysis-oriented ... -
Seismic Behavior of RC Shear Walls with Externally Bonded FRP Sheets: Analytical Studies
(American Society of Civil Engineers, 2014)An analysis model for the nonlinear response behavior of RC shear walls repaired and strengthened in flexure with externally bonded fiber-reinforced polymer (FRP) sheets using the FEM is presented. A novel component of the ... -
Experimental Investigation of Exterior RC Beam-Column Joints Retrofitted with FRP Systems
(American Society of Civil Engineers, 2014)Premature brittle failures because of seismic actions strongly affect the behavior of existing reinforced concrete (RC) structural systems. They commonly involve exterior beam-column joints of structures designed without ... -
Finite Element Modeling of Insulated FRP-Strengthened RC Beams Exposed to Fire
(American Society of Civil Engineers, 2015)The fire performance of reinforced concrete (RC) members strengthened with externally bonded fiber-reinforced polymer (FRP) laminates has been an issue of significant concern, particularly for building applications. To ... -
Influence of Slenderness on Stress-Strain Behavior of Concrete-Filled FRP Tubes: Experimental Study
(American Society of Civil Engineers, 2015)Concrete-filled fiber reinforced polymer (FRP) tubes (CFFTs) have received significant research attention over the last two decades, with recent experimental studies identifying significant benefits of CFFTs filled with ... -
Reviewers
(American Society of Civil Engineers, 2014) -
Axial Loading Tests and Simplified Modeling of Sandwich Panels with GFRP Skins and Soft Core at Various Slenderness Ratios
(American Society of Civil Engineers, 2015)Experimental and analytical studies were conducted to investigate the axial strength and failure modes of sandwich panels with glass fiber reinforced polymer (GFRP) skins and soft polyurethane core. A total of 45 specimens of -
Flexural Behavior of Stone Slabs Reinforced with Prestressed NSM CFRP Bars
(American Society of Civil Engineers, 2014)A technique for reinforcing stone slabs with prestressed near-surface mounted (NSM) carbon fiber–reinforced polymer (CFRP) bars is proposed and investigated in this research. Six stone slabs were tested under monotonic ... -
Out-of-Plane Behavior of URM Walls Strengthened with Fabric-Reinforced Cementitious Matrix Composite
(American Society of Civil Engineers, 2014)The use of unreinforced masonry (URM) walls is common practice in different types of construction, such as interior or exterior walls. URM walls are typically deficient in flexural capacity when subjected to out-of-plane ... -
Experimental Study of Bond Behavior of CFRP-to-Brick Joints
(American Society of Civil Engineers, 2015)Carbon fiber–reinforced polymer (CFRP) composite materials have been widely used to strengthen masonry constructions. The bond between CFRP and substrate strongly conditions the performance of reinforced masonry structures. ... -
Behavior of Concrete-Filled FRP Tubes under Cyclic Axial Compression
(American Society of Civil Engineers, 2015)Concrete-filled fiber-reinforced polymer (FRP) tubes (CFFTs) are an attractive form of hybrid compression members incorporating FRP. CFFTs have several advantages over traditional column forms, including their excellent ... -
Concrete Damage Plasticity Model for Modeling FRP-to-Concrete Bond Behavior
(American Society of Civil Engineers, 2015)The technique of externally bonding fiber-reinforced polymer (FRP) composites has become very popular worldwide for retrofitting existing reinforced concrete (RC) structures. Debonding of FRP from the concrete substrate ... -
Flexural Strengthening of RC Beams with an Externally Bonded Fabric-Reinforced Cementitious Matrix
(American Society of Civil Engineers, 2014)Concrete structures deteriorate for various reasons and upgrading is needed to ensure their continued safe working conditions. Retrofitting reinforced concrete (RC) beams have been accomplished using various techniques, ...