ASCE: Recent submissions
Now showing items 4121-4140 of 107386
-
Characterization of Porous Fired Clay Brick Incorporating Bamboo Leaf
(American Society of Civil Engineers, 2025)This study explores the potential of incorporating bamboo leaf as an additive for fired clay brick. The clay and bamboo leaf were characterized by using different techniques [X-ray diffractometer (XRD), X-ray fluorescence ... -
Seismic Ground Surface Amplification Pattern due to the Presence of Twin Tunnels
(American Society of Civil Engineers, 2025)In this study, a series of 1-g large shaking table tests were conducted on a soil layer with embedded twin tunnels to evaluate the acceleration distribution pattern at the ground surface. Furthermore, numerical analyses ... -
Study of Interlayer Shear Effects in the Structure of Asphalt Overlay on Existing Rigid Airfield Pavement Using the Digital Image Correlation Method
(American Society of Civil Engineers, 2025)Shearing would occur in the interface of asphalt overlay on existing rigid airport pavements due to the differences in the mechanical properties of the materials loaded by aircraft. The interlayer contact affects the ... -
Cold Bitumen Emulsion Mixtures with Waste Glass: A Laboratory-Driven Investigation into Performance
(American Society of Civil Engineers, 2025)Global road development accelerates environmental harm, resource depletion, and fossil fuel consumption due to conventional aggregate and hot mix asphalt (HMA) use. To combat this, sustainable pavement construction is ... -
Influence Mechanism of Mechanical Properties and Microscopic Damage in Natural Aggregate and Recycled Aggregate Concrete Containing Zeolite Powder
(American Society of Civil Engineers, 2025)In order to study the mechanical properties and damage evolution law of concrete with different zeolite powder (ZP) contents, natural aggregate concrete (ZPC) and recycled aggregate concrete (ZPRC) were prepared by replacing ... -
Soil Contaminated with a High Concentration of Copper or Lead Solidified with Red Mud–Carbide Slag–Phosphogypsum: Structural Stability in an Acidic Environment
(American Society of Civil Engineers, 2025)During the landfilling and resource utilization of solidified soil, it is inevitable that the material will be influenced by the surrounding water environment. Processes such as soaking and infiltration of both clean water ... -
Converting Iron Mine Tailings into Composite Aggregates for Ultrahigh-Performance Mortar
(American Society of Civil Engineers, 2025)Iron tailings (IT) are by-products of iron ore mining, which have the characteristics of high stockpile and low cost. Recycling IT as alternatives for high-quality quartz sand (QS) in ultrahigh-performance mortar (UHPM) ... -
Investigating RAP Dispersion and Its Effect on the Performance of Recycled Hot-Mix Asphalt Mixtures
(American Society of Civil Engineers, 2025)The migration of reclaimed asphalt pavement (RAP) mastic into the recycled hot-mix asphalt (RHMA) mixture system during the hot-mix process results in varying dispersion degrees of RAP aggregates within RHMA, impacting its ... -
Durability of Coir Fiber–Reinforced Cement-Stabilized Rammed Earth Composite
(American Society of Civil Engineers, 2025)Cement-stabilized rammed earth (CSRE) finds applications in structural walls. The CSRE walls subjected to compression and flexure show brittle failures. The inclusion of short fibers into the CSRE matrix enhances the ... -
Influence of Molding Process on the Performance of Sisal Fiber Cement–Emulsified Asphalt Mixture
(American Society of Civil Engineers, 2025)In order to explore the influence of the molding process on the performance of sisal fiber cement–emulsified asphalt mixture, specimens were formed by different molding processes. Different mixing methods, mixing times, ... -
Effect of Wind and Temperature on the Macroscopic Properties and Microstructure of Lightweight Cellular Concrete during Pouring
(American Society of Civil Engineers, 2025)Lightweight cellular concrete (LCC) is widely used as a subgrade fill. It is susceptible to environmental factors such as wind and temperature during pouring, and unfavorable environmental factors can lead to deterioration ... -
Full-Scale Testing of Lateral Pressures in an Expansive Clay upon Infiltration
(American Society of Civil Engineers, 2025)Full-scale testing of lateral pressures in expansive clay under various saturation conditions is crucial to better understand the behavior of these soils and predict potential damage to structures. However, due to their ... -
Failure Mechanism and Ultimate Uplift Capacity Calculation Method for Belled Uplift Piles Considering Influences from Underground Water
(American Society of Civil Engineers, 2025)As underground structures’ burial depth increases, buoyancy resistance due to groundwater becomes more pronounced. This study, through numerical simulation, analysis of field measurement data, and theoretical analysis, ... -
Development of Water-Cured Alkali-Activated Concrete with a High Volume of Silica-Rich Waste Limestone Powder and GGBS and Fly Ash Materials: Strength, Durability, and Life Cycle Assessment
(American Society of Civil Engineers, 2025)Significant amounts of finely ground waste powder are produced during the heating process of silica-rich limestone aggregates in asphalt concrete plants. This resulting by-product poses challenges and opportunities in the ... -
Effects of the Ion Exchange and Adsorption Behavior of Clinoptilolite on Chloride Solidification in Cement Paste
(American Society of Civil Engineers, 2025)Clinoptilolite has been used in cement-based materials to reduce shrinkage and increase compressive strength, but the ion exchange and ion adsorption behavior of clinoptilolite in cement-based materials have not been ... -
Rapid Assessment of Concrete Resistance to Physical Sulfate Attack: Effects of the Binder, the Water-to-Binder Ratio, and the Entrained Air
(American Society of Civil Engineers, 2025)Concrete surfaces in the evaporation zone above sulfate-rich soils are subject to severe damage from scaling. Such a physical sulfate attack (PSA) on concrete is a consequence of a cyclic regime between hot-dry and cold-wet ... -
Construction and Demolition Waste Stabilization through Biocarbonation of Reactive Magnesia Cement: Effect of Urea Concentration
(American Society of Civil Engineers, 2025)Biocarbonation of reactive magnesia cement (RMC) is a promising and sustainable biogeotechnology for construction and demolition waste (CDW) stabilization. The concentration of urea is the dominant factor affecting the RMC ... -
Long-Term Creep Behavior of New Earth Composite Materials
(American Society of Civil Engineers, 2025)Construction material can be used to build bent structural elements only if a number of mechanical and physical parameters are available to determine safety and serviceability. One of the most important parameters driving ... -
Effect of Three-Dimensional Porous Graphene on Chloride Diffusion and Sulfate Attack of Cement Mortar
(American Society of Civil Engineers, 2025)In this study, the barrier mechanism of cement mortar reinforced by three-dimensional porous graphene (3DPG) with unique structure was investigated. Various sizes of cement mortar samples were prepared, and the basic ... -
Effect of Corrosion on the Fatigue Behavior of G20Mn5QT Cast Steel Welded Connections and Fatigue Life Evaluation Model
(American Society of Civil Engineers, 2025)Corrosion fatigue experiments were conducted on a welded connection constructed of G20Mn5QT cast steel in 3.5% by weight NaCl solution. The corrosion fatigue fracture mechanism of the welded connection was determined. ...