ASCE: Recent submissions
Now showing items 2421-2440 of 107386
-
Multiscale Analysis of Epoxy Asphalt Performance Based on Formulation and Curing Parameters
(American Society of Civil Engineers, 2025)AbstractThis study aims to investigate the microstructure and mechanical performance of epoxy asphalt under the combined effects of epoxy system dosages and curing temperatures. Fourier transform infrared spectroscopy ... -
Role of Scaling Up Particle Size in Principal Stress Rotation under Simple Shear
(American Society of Civil Engineers, 2025)Abstract The presence of principal stress rotation (PSR) in granular materials is a significant signature for engineering practices such as slopes, caverns, and silos. Multiscale modeling of granular behavior generally ... -
Effects of Silica Fume on Alkali-Activated Material Based on Iron Ore Tailings
(American Society of Civil Engineers, 2025)AbstractThe objective of this study was to evaluate the effect of silica fume incorporation on the mechanical and microstructural properties of alkali-activated material based on iron ore tailings. Sodium hydroxide was ... -
Mechanical Properties and Modification Mechanism of Disintegrated Carbonaceous Mudstone Reinforced with Xanthan Gum
(American Society of Civil Engineers, 2025)AbstractDisintegrated carbonaceous mudstone (DCM) is widely used as embankment fillers in concrete engineering because of its low cost and ecofriendly features. However, DCM has low strength and large deformation; further ... -
Comprehensive Rheological, Thermal, Chemical, and Morphological Characterization of the LDPE-Modified Asphalt Binder
(American Society of Civil Engineers, 2025)AbstractGlobally, an enormous amount of low-density polyethylene (LDPE) waste is landfilled, causing drastic environmental impacts. Incorporating LDPE in asphalt binder can mitigate its negative impact on the environment, ... -
Evaluating the Efficacy of Hydrophobic Impregnation in Improving Freeze–Thaw Durability of Air-Entrained Concrete Pavement Mixes
(American Society of Civil Engineers, 2025)AbstractHydrophobic impregnation is a well-known method to reduce water absorption and improve the corrosion resistance of reinforced concrete. However, its effectiveness in enhancing the freeze–thaw resistance of concrete ... -
Influence of Mix Constituents on the Printability and Compressive Strength of Binary and Ternary Cementitious Composite Made of Agro-Industrial Waste
(American Society of Civil Engineers, 2026)AbstractIn today’s world, three-dimensional concrete printing (3DCP) technology has seen increased popularity owing to its improved advantages, such as rapid construction and better structural efficacy, among others, over ... -
Effects of Geopolymers Synthesized with Red Mud and Fly Ash as Warm-Mix Asphalt Additives on the Rheological Properties of Asphalt Mastics and Asphalt–Filler Interaction Ability
(American Society of Civil Engineers, 2025)AbstractThis study synthesizes a new geopolymer warm-mix asphalt (WMA) additive using red mud (RM) and fly ash (FA) as precursor materials. Orthogonal tests and thermogravimetric tests were carried out to determine the ... -
Low-Strength Concrete with Raw-Crushed Wind Turbine Blade and Coarse Recycled Aggregate
(American Society of Civil Engineers, 2025)AbstractNonselective crushing of wind turbine blades results in raw-crushed wind turbine blade (RCWTB), a material that can be used in concrete production. Wind farm decommissioning can also generate coarse recycled aggregate ... -
Analyzing Influencing Factors and Predictive Modeling of Dynamic Resilient Modulus for SAP-Treated Loess Subgrade
(American Society of Civil Engineers, 2026)AbstractThe dynamic resilient modulus of subgrade soil is a critical parameter in flexible pavement design, reflecting the stiffness of the subgrade material. The cyclic triaxial tests were carried out to investigate the ... -
Utilization and Modification of Large-Size Coal Gangue Aggregate with Alkali-Activated Materials for Sustainable Concrete
(American Society of Civil Engineers, 2025)AbstractThis study investigated the collaborative utilization of large-sized coal gangue aggregate (CGA), specifically within the size range of 5–20 mm, in conjunction with alkali-activated material (AAM). The aim was ... -
Wetting Behavior and Failure Mechanism of Asphalt–Aggregate Interface Based on Molecular Dynamics Simulations
(American Society of Civil Engineers, 2025)AbstractEnvironmental factors, such as aging and water, can lead to the failure and damage of the asphalt–aggregate interface, accelerating the occurrence of asphalt pavement diseases. This study investigates the wetting ... -
Investigation of the Mechanical Properties and Failure Modes of Single Calcareous Sand Particles and Artificially Cemented Particles
(American Society of Civil Engineers, 2026)Abstract Calcareous sands present significant geotechnical challenges because of their complex particle shapes, porous microstructures, and low particle strength. This study investigates the micromechanical properties and ... -
Synthesis and Water Repellency Evaluation of Hydrophobic Modification Materials for Silt Subgrade
(American Society of Civil Engineers, 2026)AbstractSilt subgrade is often deformed and damaged due to poor water stability, which poses a threat to the safe operation of highways. To address these issues, a new nanotype hydrophobic material (NT-HM) was synthesized ... -
Effects of Pretreated Crumb Rubber on the Compatibility and Self-Healing Characteristics of Asphalt Binder
(American Society of Civil Engineers, 2025)AbstractTo enhance the interfacial compatibility of crumb rubber–modified asphalt (CRMA), a series of pretreatment methods, such as preswelling or microwave irradiation of crumb rubber, are conventionally employed prior ... -
Ecological Alkaline Activator Based on Coffee Waste Ash Applied to Geopolymers
(American Society of Civil Engineers, 2025)AbstractThis study proposes the application of coffee waste ash (CWA) as an alkaline activator in geopolymers, replacing the hydroxide used. The motivations for this study are related to the need to develop ecological ... -
Internal Curing of Fine Coral Aggregates Incorporated in Ultrahigh-Performance Seawater Sea Sand Concrete
(American Society of Civil Engineers, 2026)AbstractIn this study, the internal curing capacity of fine coral aggregates incorporated in ultrahigh performance seawater sea sand concrete (UHPSSC) was investigated. The results showed that the release of internal curing ... -
Experimental Investigation of the Engineering and Leaching Properties of Alkali-Activated Geopolymer Soil
(American Society of Civil Engineers, 2025)AbstractGeopolymer, a sustainable alternative to conventional binders, ultimately assists to control environmental pollution, reduces human health risks, and provides economic benefits. This study examined the mechanical, ... -
Microscopic Evaluation of Environmental Properties of Cement-Cured Graphite Tailings Modified with Calcined Kaolin
(American Society of Civil Engineers, 2025)AbstractMassive accumulation of graphite tailings (GTs) seriously affects the ecological environment. In the process of recycling and reutilization, there are problems such as restricted use pathways and low use quantities. ... -
The Influence of Anchorage Length on Bond Performance between Ultrahigh-Performance Concrete and Steel Bar
(American Society of Civil Engineers, 2025)AbstractThis study presents the influence of anchorage length on bond performance between lightweight ultrahigh-performance concrete (LUHPC) and HTRB600 steel bar. Using the hinged beam test method for bond performance ...