ASCE: Recent submissions
Now showing items 2381-2400 of 107386
-
Development of a Plasticity-Controlled Fatigue Failure Prediction Model for Asphalt Binder
(American Society of Civil Engineers, 2025)AbstractFatigue failure of asphalt pavement and asphalt mixtures is greatly affected by that of asphalt binder, which exhibits elasticity/viscoelasticity, plasticity, and damage as loads increase. Existing models do not ... -
Understanding the Activation–Aging Coupling Effect: How Initial Aging Levels and RAP Content Influence RAP Binder Performance
(American Society of Civil Engineers, 2025)AbstractPreheating reclaimed asphalt pavement (RAP) is a crucial step in recycling processes because it simultaneously activates the RAP binder and deepens its aging levels, leading to complex coupling effects (CE) on ... -
Isothermal Adsorption Model of Cyclic Water Vapor Adsorption and Desorption for the Whole Range of Relative Humidity for Concrete Material
(American Society of Civil Engineers, 2025)AbstractThe water vapor adsorption isothermal model for concrete materials enables the analysis of microstructural characteristics and an understanding of the material’s hygroscopic performance. In this study, the cyclic ... -
Effect of High Temperatures on Ultrahigh-Performance Concrete with Glass Powder
(American Society of Civil Engineers, 2025)AbstractThis article reports the high-temperature performance of ultrahigh performance cementitious composites (UHPC) with glass powder (GP) as a partial replacement for portland cement. In the several mixtures prepared, ... -
Stress Corrosion Cracking Behavior of Low-Carbon Steel Anchor Bolts in a Carbonaceous Mudstone Corrosive Environment
(American Society of Civil Engineers, 2025)AbstractTo determine the mechanism of the continuous deterioration of the mechanical properties of low-carbon steel anchor bolts in a corrosive carbonaceous mudstone environment, slow strain rate tensile (SSRT) tests, ... -
Evaluation of Different Mix Parameters Related to Alkaline Activator on Microstructure and Rebar Corrosion Behavior of Chloride-Added Fly Ash–Based Geopolymer Concrete
(American Society of Civil Engineers, 2026)AbstractThis study delves into the effects of different mix parameters pertaining to the alkaline activator on the corrosion behavior of rebars and the microstructure evolution of fly ash–based geopolymer concrete (Fa-GpeC) ... -
Synthesis of Shrinkage-Reducing Admixture with Different Branch Chain Structures and Its Effect on the Drying Shrinkage of Cement-Based Materials
(American Society of Civil Engineers, 2025)AbstractShrinkage-reducing admixtures (SRAs) can effectively mitigate the drying shrinkage of cement-based materials, but the influence of SRA structures with varying configurations on drying shrinkage remains unclear. ... -
Numerical and Experimental Analysis of the Impact of Cracking and Chloride Concentrations on Corrosion in Steel-Reinforced Concrete
(American Society of Civil Engineers, 2025)AbstractThis study investigated the effects of cracking and varying levels of chloride exposure concentrations on the chloride penetration and corrosion performance of reinforced concrete beams subjected to mechanical ... -
Impact of Gradation Effects on the Particle Breakage and Mechanical Response of Calcareous Sands
(American Society of Civil Engineers, 2026)Abstract Calcareous sand is distinguished by its angular particle shape and high susceptibility to breakage during shearing. The particle size distribution (gradation), interparticle density, and particle strength play ... -
Rheological and Micro Properties of High-Viscosity Binder–Incorporated Polyphosphoric Acid and Rock Asphalt
(American Society of Civil Engineers, 2026)AbstractTo enhance the performance of high-viscosity modified asphalt (HVMA), polyphosphoric acid (PPA) and North American rock asphalt (NA–RA) were incorporated into styrene-butadiene-styrene (SBS)/crumb rubber (CR) ... -
Calculation Model of Tensile–Compressive Dynamic Modulus and Structural Load Response of Asphalt Mixture under Three-Dimensional Stress State
(American Society of Civil Engineers, 2025)AbstractThe three-dimensional stiffness characteristic tests of AC-13 asphalt mixture were conducted under varying temperatures, frequencies, and confining pressures using self-developed triaxial testing equipment. The ... -
Enhancement of Attached Mortar in Recycled Aggregates of Returned Concrete by Wet Carbonation
(American Society of Civil Engineers, 2025)AbstractA significant volume of ready-mix concrete is returned to the plant for various reasons such as cancelation of orders, concrete not meeting the specification at the site, and orders of more quantity than required. ... -
Development and Characterization of Engineering Superhydrophobic Silica Sol for Enhanced Subsurface Stability and Seepage Control
(American Society of Civil Engineers, 2025)AbstractThis investigation employed polydimethylsiloxane (PMHS) for the surface modification of silica sol, preparing a novel grouting material with superhydrophobic properties. Subsequently, testing and microscopic ... -
Development of a Low-Clinker GGBFS Calcined Clay Cement Using Waste Ceramic Tile
(American Society of Civil Engineers, 2025)AbstractThe present study explores the potential for manufacturing low-clinker cement using waste recycled clay from ceramic tile factories and ground granulated blast-furnace slag, known as ground granulated blast furnace ... -
Efficient Hydration Mechanism in Microwave Curing System from a Microwave Energy Perspective
(American Society of Civil Engineers, 2025)AbstractMicrowave curing technology has the advantages of rapid volume heating and low energy consumption, but it is difficult to control the multiple curing parameters and adjust them to their optimal levels. This study ... -
Study on the Compaction State of Asphalt Mixtures Based on Three-Dimensional Modeling Using a Mesoscale Element Equivalence Method
(American Society of Civil Engineers, 2025)AbstractAs a multiscale material, it is difficult for a single compaction degree index to fully reveal the mesostructure state and change process of the multiphase and multiscale components of asphalt mixture. In this ... -
Perspectives on the Stability of Emulsified Asphalt Based on Interfacial Rheological Characteristics
(American Society of Civil Engineers, 2026)AbstractThe oil–water interfacial film formed by emulsifier molecules adsorbed around asphalt droplets affects the stability of emulsified asphalt. This study investigated the stability of emulsified asphalt by characterizing ... -
Icing Prediction Model of Asphalt Pavement in Cold Regions Based on an Improved BP Neural Network
(American Society of Civil Engineers, 2025)AbstractTo better understand the factors influencing asphalt pavement icing and its impact trends, a research approach combining indoor experiments, field meteorological factor investigations, and statistical analysis was ... -
Effect of Fly Ash on Early-Age Tensile Creep, Shrinkage, and Cracking Resistance of Supersulfated Cement Concrete under Uniaxial Restrained Condition
(American Society of Civil Engineers, 2026)AbstractSupersulfated cement (SSC) has been utilized to substitute for portland cement to reduce the carbon dioxide emissions and energy consumption caused by the production of portland cement. Improving the durability of ... -
Field Investigation and Numerical Analysis of Shear Failure in Mudstone–Shale Interbedded Gently Dipping Antidip Rock Slopes: A Case Study
(American Society of Civil Engineers, 2025)Abstract Large-scale shear sliding in antidip soft–hard interlayered slopes is a critical issue in open-pit coal mines in China, contrasting with the predominant focus on toppling failure in existing slope stability research. ...