ASCE: Recent submissions
Now showing items 1521-1540 of 107386
-
Seismic Control of High-Rise Buildings by Combining Fuzzy Logic and Higher-Order Fractional Order Controllers Using an Optimized MR+TMD
(American Society of Civil Engineers, 2025)AbstractThis study presents a novel hybrid seismic control system for high-rise buildings, combining a higher-order fractional order proportional-integral-derivative (HFOPID) controller with an interval type-2 fuzzy logic ... -
Seismic Performance of Self-Centering Concrete Bridge Piers Using Superelastic Shape Memory Alloy
(American Society of Civil Engineers, 2026)AbstractSuperelastic shape memory alloys (SE-SMAs) are exceptional materials capable of enduring significant inelastic deformation and reverting to their original shape when stress is removed. In this study, this characteristic ... -
Field Grouting Test Study for High-Level Radioactive Waste Disposal at the Beishan Underground Research Laboratory
(American Society of Civil Engineers, 2026)Abstract The safe disposal of high-level radioactive waste (HLW) is crucial for environmental protection and the sustainable development of nuclear energy. As the primary disposal method, deep geological disposal requires ... -
Finite-Element Analysis of Load-Transfer Efficiency in Concrete Pavements Reinforced with Bamboo Dowel Bars
(American Society of Civil Engineers, 2026)AbstractThis study investigated the load-transfer efficiency of bamboo dowel bars in concrete pavements using finite-element method (FEM) analysis. Bamboo’s role as a sustainable reinforcement material in pavement engineering ... -
Mechanical and Corrosion Characteristics of RCC Beams Incorporating Brick Aggregates and Different Curing Techniques: An MCDM Analysis
(American Society of Civil Engineers, 2026)AbstractThe corrosion of reinforced is one of the most prominent problems faced by reinforced cement concrete (RCC) structures all over the world. This inevitable phenomenon affects the service life and reliability of the ... -
Data-Driven Decision Framework for Modeling and Quantification of Uncertainty and Variability in Construction Project Scheduling
(American Society of Civil Engineers, 2025)AbstractThe success of an infrastructure project is often judged by its timely completion within budget and quality standards. Most construction projects experience delays due to poor project planning, budget conflicts, ... -
Performance Evaluation of Tuned Mass Dampers against Progressive Collapse in Steel Structures during an Earthquake
(American Society of Civil Engineers, 2025)AbstractProgressive collapse is a catastrophic phenomenon in structural engineering influenced by various factors such as human negligence and natural disasters. The primary mechanism of progressive collapse involves ... -
Urban Flood Risk Assessment
(American Society of Civil Engineers, 2026)AbstractFloods are a significant hydrological phenomenon, particularly in urban regions, where they become a natural disaster due to varied land uses, high population density, and intense flood events. Urban flooding ... -
Analytical Approach for Predicting Deflection in Composite Deck Slabs Subjected to Service Load
(American Society of Civil Engineers, 2026)AbstractSteel-concrete composite (SCC) deck slabs have been utilized significantly in building and bridge structures due to their economy, ease, and speed of construction. SCC deck slabs are slender due to a high span-to-depth ... -
Evaluating the Impact of BIM on Quantity Take-Off Accuracy: A Comparative Study of BIM-Based and Traditional Methods in Building Projects in Nepal
(American Society of Civil Engineers, 2026)AbstractThis research evaluates the accuracy of quantity take-off (QTO) generated using building information modeling (BIM) in Nepalese building projects, compared with traditional methods involving two-dimensional (2D) ... -
Approximate Ponding Analysis for Sloped Roofs
(American Society of Civil Engineers, 2025)AbstractThe accumulation of fluid on structural framing results in loads and deflections that are mutually dependent on each other. This effect, known as ponding, is a design consideration for roofs subject to rain loads ... -
Mechanical and Durability Performance of 3D-Printed Concrete with Coarse Aggregates and Cold Joints
(American Society of Civil Engineers, 2025)AbstractThree-dimensional (3D) construction printing technology has advanced significantly in recent years. Its application in building construction depends on a thorough understanding of the performance of printed materials. ... -
Survey and Review of Bridge Strikes and Assessment Methods for Low-Clearance Steel-Girder Bridges
(American Society of Civil Engineers, 2026)AbstractBridge strikes are events where overheight vehicles impact bridge superstructures, causing damage ranging from superficial to severe. When a bridge strike is discovered, the responsible agency must assess the damage ... -
Physical Experiment and Numerical Simulation Study on Balanced Mining Based on the 110 Mining Method in Shallow-Buried Thin Bedrock with a Thick Weathered Layer
(American Society of Civil Engineers, 2025)Abstract Surface subsidence and ecological destruction caused by underground coal mining have become hot topics in mining research. To reduce the negative externalities of mining activities, China has proposed a balanced ... -
Influence of Nonlinear Soil–Structure Interaction on the Seismic Response of a RC Floating Columns Structure with Geotechnical Isolation and Shear Wall Systems
(American Society of Civil Engineers, 2026)AbstractNonlinear soil properties are crucial in seismic structural responses, revealing the interdependence between soil and structure during seismic events. Floating column structures are significantly more vulnerable ... -
Tsunami Fragility Functions for Low-Rise Reinforced Concrete Buildings for Enhancing Coastal Resilience
(American Society of Civil Engineers, 2025)AbstractThe coastal belt in Pakistan is vulnerable to a tsunami threat due to an earthquake in the Makran subduction zone. This paper presents the tsunami vulnerability analysis of typical reinforced concrete (RC) buildings ... -
The Effect of Chopped Basalt Fiber on Lightweight Concrete’s Mechanical Behavior
(American Society of Civil Engineers, 2025)AbstractIn modern construction, there is increasing demand for innovative materials that provide both structural integrity and sustainability. Lightweight aggregate concrete (LWAC) has emerged as a promising solution, ... -
Effect of Graphene Oxide on the Physical and Mechanical Properties of Concrete Composite during Initial Hydration and Strength Growth Using an Electromechanical Impedance Technique
(American Society of Civil Engineers, 2025)AbstractNondestructive monitoring of concrete composite strength growth is of great importance for the safety and stability of engineering structures. Traditional destructive testing methods are limited in providing real-time ... -
An Autoencoder-Based Machine- and Deep-Learning Approach for Predicting Bridge Deck Conditions in Texas
(American Society of Civil Engineers, 2025)AbstractBridges are crucial to the global economy, facilitating mobility and accessibility. Effective monitoring and maintenance of these structures are vital due to aging, heavy traffic, and variable construction quality. ... -
Investigation of Interfacial Interaction of Concrete Masonry Assembly Subjected to Monotonic Loading
(American Society of Civil Engineers, 2025)AbstractConcrete masonry prisms are composed of various materials, and the properties of and interaction among these materials play a crucial role in the overall performance of masonry structure. Previous studies considered ...