ASCE: Recent submissions
Now showing items 1281-1300 of 107386
-
Experimental and Theoretical Investigations of the Shear Resistance of SCS Composite Structures with Web Openings
(American Society of Civil Engineers, 2026)AbstractSteel–concrete–steel (SCS) composite structures with continuous steel webs offer significant advantages in terms of structural capacity, waterproofness, construction efficiency, and others, and these structures ... -
Shake Table Tests of a Three-Story Steel Structure with RSFJ
(American Society of Civil Engineers, 2026)AbstractAs part of the Robust Building Systems (ROBUST) research program, several innovative seismic-resisting systems based on friction dampers were tested on a shake table for the first time. The tests examined whether ... -
Assessment of the Main Wind Force Resisting System Provisions of ASCE/SEI 7-22 for Rigid Buildings
(American Society of Civil Engineers, 2025)AbstractIn the provisions of ASCE/SEI 7-22, there are two philosophically different methods provided for the main wind force resisting system (MWFRS) loads in Chapter 27 and 28. The objective of this paper is to compare ... -
Methodology for Obtaining Aerodynamic Coefficients for Unified Wind Loading Provisions in ASCE 7
(American Society of Civil Engineers, 2025)AbstractThe objective of this study was to develop a method to update and consolidate the aerodynamic coefficients that are currently in the directional procedure and envelope procedure for the Main Wind Force Resisting ... -
Splitting Capacity of Timber Connections with Densified Wood Dowels Loaded Perpendicular to the Grain
(American Society of Civil Engineers, 2025)AbstractDowelled connections loaded at an angle to the grain can result in splitting of the timber member. Compared to steel dowels, wooden dowels have better compatibility of stiffness with the assembled timber members, ... -
Influence of Various Initial Side-Column Damages on the Horizontal and Vertical Mixed Progressive Collapse Behavior of RC Planar Frames
(American Society of Civil Engineers, 2025)AbstractBlast loads not only cause the single key column failure of reinforced concrete planar frames, but also simultaneously introduce damage to other adjacent members. By conducting quasi-static test on a 1:3 scaled-down ... -
Wind Pressure and Load Analysis on Large Building Roofs: Applicability of Database-Assisted Design to Eurocode 1 and Italian Standards
(American Society of Civil Engineers, 2025)AbstractDatabase-assisted design (DAD) methodology has emerged as a powerful approach to estimate structural wind loads, as an alternative to prescriptive design standards for low-rise buildings. The DAD is currently being ... -
An Investigation on Residual Stress Distribution in Cold-Formed Steel Channel Sections
(American Society of Civil Engineers, 2026)AbstractThis study investigates the behavior of residual stresses (RS) in cold-formed steel (CFS) unlipped press braked channel (PBC) sections. A nondestructive X-ray diffraction (XRD) technique was employed to characterize ... -
A Fully Coupled Flow Deformation Model for Seismic Response Analysis of Underground Structures in Liquefiable Sites
(American Society of Civil Engineers, 2026)Abstract With an algorithm for equivalent shear strain and a loading–unloading criterion, the Davidenkov constitutive model is formulated in three-dimensional stress space. A method for effective stress analysis to capture ... -
Shear Behavior of Novel GFRP Grid Web-Concrete Composite Beam
(American Society of Civil Engineers, 2025)AbstractGlass-fiber-reinforced polymer (GFRP) is widely applied in composite structures to optimize structural performance. The puzzle of heavy self-weight and easy cracking in the web for conventional reinforced concrete ... -
Estimation of Missing Stress Data for Structural Health Monitoring Based on Multitask Learning and Multisource Information
(American Society of Civil Engineers, 2026)AbstractStrain monitoring is of importance for structural health monitoring (SHM). The stress responses obtained by strain sensors play an important role in structural damage detection and health status assessment. However, ... -
Full-Scale Experimental Study of a Segmental Posttensioned Masonry Wall System
(American Society of Civil Engineers, 2026)AbstractOff-site construction (OSC) enhances construction quality control and speed by relocating building processes to controlled environments. OSC techniques significantly improve project efficiency and consistency. This ... -
Ductile Fracture Tests and Simulation of High-Strength Steel at Elevated Temperatures
(American Society of Civil Engineers, 2026)AbstractThis paper presents the experimental results of Q690 steel coupons tensioned to fracture at elevated temperatures, and the development of a finite element methodology for investigating the ductile fracture behavior. ... -
Multidirectional Cyclic Lateral-Load Testing of Repaired Self-Centering Cross-Laminated Timber Shear Walls
(American Society of Civil Engineers, 2025)AbstractThis paper presents an experimental study on the multidirectional cyclic lateral-load response of repaired post-tensioned self-centering (SC) controlled-rocking cross-laminated timber (CLT) shear walls (SC-CLT ... -
Smart Morphing Facades for Wind-Induced Vibration Control in Tall Buildings: Insights from Large-Scale Aeroelastic Wind Tunnel Testing
(American Society of Civil Engineers, 2026)AbstractSmart morphing façade (Smorphacade) is presented as a strategy to mitigate wind-induced vibrations in tall buildings with the goal of increasing structural safety and occupant comfort. Past research has shown that ... -
Assessments of Seismic Response and Energy Harvesting of Offshore Wind Turbines Equipped with Tuned Mass Damper Inerter
(American Society of Civil Engineers, 2025)AbstractThis study investigates the dynamic performance, energy harvesting capacity, and seismic reliability of offshore wind turbine towers equipped with tuned mass dampers with inerters and electromagnetic energy harvesting ... -
Experimental Investigation of Nonlinear Cyclic Flexural Behavior of Hollow and Concrete-Filled Aluminium Beams
(American Society of Civil Engineers, 2025)AbstractThis study presents an experimental program to characterize, for the first time, the nonlinear cyclic flexural behavior of hollow and concrete-filled aluminium tubular beams at large rotation levels up to 0.08 rad. ... -
Improved Design Expressions for the Global Buckling Capacity and In-Plane Girder Stiffness of Torsionally Braced I-Girder Systems
(American Society of Civil Engineers, 2025)AbstractThe stability of girder systems is generally critical during erection and construction of steel bridges. Member stability is usually governed by the resistance to conventional lateral-torsional buckling (LTB), which ... -
Using Shake Table Tests to Characterize the Collaborative Seismic Behavior of the Suspended Ceilings and Masonry Infill Walls of RC Frames
(American Society of Civil Engineers, 2025)AbstractThe suspended ceilings and masonry infill walls of reinforced concrete (RC) frames have been proven to be vulnerable to seismic damage. To characterize their collaborative seismic behavior, two sets of shake table ... -
Earth Pressure Calculation Method for Shallow-Buried Loess Tunnels Considering Support and Size Effects
(American Society of Civil Engineers, 2026)Abstract Tunnel excavation provides an efficient solution for utilizing underground space and enhancing traffic efficiency. Large-section loess tunnels address the growing demand for large-span tunnel construction in ...