Show simple item record

dc.contributor.authorR. W. Nichols
dc.date.accessioned2017-05-09T01:38:57Z
dc.date.available2017-05-09T01:38:57Z
dc.date.copyrightFebruary, 1974
dc.date.issued1974
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28104#20_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/165224
dc.description.abstractThis paper reviews some of the recent developments in the use of fracture mechanics to define the acceptable sizes and shapes of flaws in single-wall steel pressure vessels. The results of such appraisals are being incorporated in standard specifications and codes, for example in ASME and UK proposals. These steps make towards a worthwhile improvement in assessed reliability, and put in perspective particularly the considerable tolerance for porosity and slag inclusion flaws. Even so, for cracklike defects there are uncertainties still left after making such an analysis: these can be reduced by devoting sufficient attention to quality control of material fracture toughness, fabrication routes and inspection methods. The choice of materials of high intrinsic fracture toughness and low sensitivity to fabrication and process is of great importance. From the nondestructive examination side, reliability and certainty of reporting are more important than sensitivity, putting the emphasis on automated recording techniques and on overall inspection tools such as acoustic emission. Attention to these aspects must be given when considering permissible design stresses and permissible stress concentration levels.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleInterrelationships Between Mechanical Properties and the Significance of Defects
dc.typeJournal Paper
dc.journal.volume96
dc.journal.issue1
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.3454141
dc.journal.fristpage20
dc.journal.lastpage24
dc.identifier.eissn1528-8978
dc.keywordsProduct quality
dc.keywordsMechanical properties
dc.keywordsManufacturing
dc.keywordsReliability
dc.keywordsInspection
dc.keywordsFracture mechanics
dc.keywordsSteel
dc.keywordsQuality control
dc.keywordsPressure vessels
dc.keywordsSlags
dc.keywordsNondestructive evaluation
dc.keywordsStress
dc.keywordsStress concentration
dc.keywordsFracture (Materials)
dc.keywordsAcoustic emissions
dc.keywordsDesign
dc.keywordsEquipment and tools
dc.keywordsFracture toughness
dc.keywordsPorosity
dc.keywordsShapes AND Toughness
dc.treeJournal of Pressure Vessel Technology:;1974:;volume( 096 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record