Show simple item record

dc.contributor.authorW. C. Banks
dc.contributor.authorK. F. Skidmore
dc.contributor.authorH. Schwartzbart
dc.date.accessioned2017-05-09T01:38:56Z
dc.date.available2017-05-09T01:38:56Z
dc.date.copyrightMay, 1974
dc.date.issued1974
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28107#73_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/165211
dc.description.abstractAn extensive investigation of the mechanical properties of cast ASTM A216 steel WCB and WCC grades, as functions of composition, heat treatment and casting thickness is reported. Castings in section thicknesses ranging from 2 1/2 in. to 10 in. were produced from twenty-two commercial size heats by five different foundries. Tensile, Charpy-V-notch and metallographic results are discussed. The overall conclusion is that by exercising control over composition and heat treatment, cast carbon steel conforming to the requirements of ASTM A216 Grades WCB and WCC when tested at the quarter thickness point in well-fed sections up to 10 in. thick can be expected to meet the requirements of these specifications and those of Section III of the ASME Boiler and Pressure Vessel Code.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleMechanical Properties of Cast Carbon Steel in Heavy Sections
dc.typeJournal Paper
dc.journal.volume96
dc.journal.issue2
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.3454155
dc.journal.fristpage73
dc.journal.lastpage80
dc.identifier.eissn1528-8978
dc.keywordsCarbon steel
dc.keywordsMechanical properties
dc.keywordsThickness
dc.keywordsASTM International
dc.keywordsHeat treating (Metalworking)
dc.keywordsSteel
dc.keywordsCasting
dc.keywordsASME Boiler and Pressure Vessel Code AND Functions
dc.treeJournal of Pressure Vessel Technology:;1974:;volume( 096 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record