Show simple item record

dc.contributor.authorG. H. Workman
dc.contributor.authorE. C. Rodabaugh
dc.date.accessioned2017-05-09T01:38:55Z
dc.date.available2017-05-09T01:38:55Z
dc.date.copyrightAugust, 1974
dc.date.issued1974
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28110#184_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/165199
dc.description.abstractAn analysis technique for predicting the second stage creep/relaxation response of moderately complex spatially three-dimensional piping systems is presented herein. The theoretical development of this technique is based on two major assumptions. The first assumption is that at any time the behavior of the piping system can be associated with two components. One is an elastic component which is recoverable, and the other is a creep/relaxation component, which is not recoverable. The second major assumption, the simplifying assumption, is that the creep/relaxation strains due to axial, bending, and torsional loading can be decoupled and strains due to internal pressure can be neglected. Utilizing small displacement linear strain assumptions, the elastic stress-strain and creep/relaxation stress-strain rate laws can be integrated over the pipe’s cross section to yield generalized force-deformation relationships. The method of initial strains associated with the matrix displacement method of structural analysis is now applied to generate the solution of the creep/relaxation problem. This formulation utilizes two distinct types of piping elements. The first is a straight uniform pipe element and the second is a circularly curved pipe element, which incorporates both elastic and creep/relaxation flexibility factors. The end result of this formulation is a digital computer program capable of analyzing spatially three-dimensional piping systems under creep/relaxation conditions that can be represented by a series of straight or circularly curved pipe elements subjected to applied forces, displacements, and/or thermal change. An example analysis is included.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleSimplified Second Stage Creep/Relaxation Analysis of Moderately Complex Spatially Three-Dimensional Piping Systems
dc.typeJournal Paper
dc.journal.volume96
dc.journal.issue3
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.3454165
dc.journal.fristpage184
dc.journal.lastpage192
dc.identifier.eissn1528-8978
dc.keywordsAeroelasticity
dc.keywordsPiping systems
dc.keywordsPipes
dc.keywordsStress
dc.keywordsDisplacement
dc.keywordsForce
dc.keywordsPressure
dc.keywordsPlasticity
dc.keywordsDeformation
dc.keywordsStructural analysis AND Computer software
dc.treeJournal of Pressure Vessel Technology:;1974:;volume( 096 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record