Show simple item record

dc.contributor.authorS. B. Biggers
dc.contributor.authorJ. F. Wilson
dc.date.accessioned2017-05-09T01:36:19Z
dc.date.available2017-05-09T01:36:19Z
dc.date.copyrightMarch, 1973
dc.date.issued1973
dc.identifier.issn0022-0434
dc.identifier.otherJDSMAA-25998#76_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/163723
dc.description.abstractThe vehicle-guideway system is modeled as an arbitrary number of lumped, doubly-sprung vehicle mass systems traveling in tandem along simple supported beams. The vehicle load is transmitted to the guideway as a time-varying uniform pressure compatible with vehicle motion. Effects of the dimensionless system parameters on vehicle heave acceleration, and guideway deflections and bending moments at high vehicle speeds are evaluated. Results for a vehicle which includes pitching motion compare favorably with those for a vehicle without pitch where the front and rear masses are uncoupled. By proper choice of parameters, passenger compartment heave accelerations can be minimized, although to keep this acceleration below 0.05g for vehicles traveling 100–300 mph requires systems with low vehicle to beam mass and frequency ratios as well as low vehicle lower to upper mass ratios. The benefits of distributed air cushion pressure to vehicle and guideway design are shown. Also, if the ratio of lower to upper vehicle mass is low, a constant moving pressure conservatively predicts the guideway response.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleDynamic Interactions of High Speed Tracked Air Cushion Vehicles With Their Guideways: Part I of a Parametric Study
dc.typeJournal Paper
dc.journal.volume95
dc.journal.issue1
dc.journal.titleJournal of Dynamic Systems, Measurement, and Control
dc.identifier.doi10.1115/1.3426654
dc.journal.fristpage76
dc.journal.lastpage85
dc.identifier.eissn1528-9028
dc.keywordsVehicles
dc.keywordsPressure
dc.keywordsMotion
dc.keywordsTravel
dc.keywordsDeflection
dc.keywordsSimply supported beams
dc.keywordsStress AND Design
dc.treeJournal of Dynamic Systems, Measurement, and Control:;1973:;volume( 095 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record