Show simple item record

dc.contributor.authorLuo, Yun
dc.contributor.authorJiang, Wenchun
dc.contributor.authorZhang, Qian
dc.contributor.authorWan, Yu
dc.contributor.authorZhang, W. Y.
dc.contributor.authorWang, Y. J.
dc.date.accessioned2017-05-09T01:32:54Z
dc.date.available2017-05-09T01:32:54Z
dc.date.issued2016
dc.identifier.issn0094-9930
dc.identifier.otherjam_083_08_087001.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/162410
dc.description.abstractFillet weld joint is widely used in engineering structures, but a lot of failures have been generated in the fillet joint affected greatly by weld residual stress, and it is very important to decrease the residual stress. Therefore, this paper proposes a new method using overlay welding and cutting (OWC) to reduce the residual stress in the fillet weld. First, the overlay welding is applied on the root surface of fillet weld, and then the overlaid metal is removed again by cutting. In order to verify this method, a thermalelastoplastic analysis method, using finiteelement analysis (FEA) techniques, is developed to evaluate the residual stress change during the process of OWC. The impact indention measurement is also used to measure the surface residual stress. The results of FEA were compared with experimental data to confirm the accuracy of the developed finiteelement method (FEM). In order to provide a guideline for design, the dimension effects including overlay weld width and height on residual stress have been investigated. It finds that OWC can decrease 25–40% of the asweld residual stress, and increasing the overlay width and height is helpful to decrease the residual stress, which provides a reference for the reduction of residual stress in the fillet weld.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleExperimental and Numerical Study on the Reduction of Residual Stress in the Fillet Weld by Overlay Welding and Cutting Method
dc.typeJournal Paper
dc.journal.volume138
dc.journal.issue6
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.4033529
dc.journal.fristpage61405
dc.journal.lastpage61405
dc.identifier.eissn1528-8978
dc.treeJournal of Pressure Vessel Technology:;2016:;volume( 138 ):;issue: 006
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record