Show simple item record

dc.contributor.authorShen, Limin
dc.contributor.authorJin, Peibin
dc.contributor.authorWang, Yanfei
dc.contributor.authorGong, Jianming
dc.date.accessioned2017-05-09T01:32:52Z
dc.date.available2017-05-09T01:32:52Z
dc.date.issued2016
dc.identifier.issn0094-9930
dc.identifier.otherpvt_138_05_051403.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/162397
dc.description.abstractAssociated with mechanical and environmental degradation, such as lowoxygen potential, high carbon activity, and high operating temperature, premature failure generally occurs in ethylene cracking furnace tube. This work is aimed at damage evolution numerical simulation and life prediction of two commercial Fe–Cr–Ni alloys (HP40Nb alloy and KHR45A alloy) under different operating temperatures, subjected to coupled carburization damage and creep damage. The results show that carburization is the most important factor that caused ethylene cracking furnace tube to rupture ahead of service time. Increased operating temperatures accelerate the damage rate markedly for the two alloys. For HP40Nb alloy and KHR45A alloy, the service life at 1223 K is almost 2.5 and 3 times higher than the value at 1323 K, respectively. Due to a higher mass of Ni/(Cr + Fe) ratio, the service life of KHR45A alloy is longer than that of HP40Nb alloy at the same operating condition. Distribution of von Mises stress دƒe and maximum principal stress دƒp along the inner surface and the outer surface of tubes is different to each other with damage evolution at different operating temperatures.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleNumerical Simulation of Damage Evolution and Life Prediction for Two Commercial Fe–Cr–Ni Alloys Subjected to Mechanical and Environmental Factors
dc.typeJournal Paper
dc.journal.volume138
dc.journal.issue5
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.4032916
dc.journal.fristpage51403
dc.journal.lastpage51403
dc.identifier.eissn1528-8978
dc.treeJournal of Pressure Vessel Technology:;2016:;volume( 138 ):;issue: 005
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record