Show simple item record

dc.contributor.authorQian, Guian
dc.contributor.authorGonzأ،lez
dc.contributor.authorNiffenegger, Markus
dc.contributor.authorSharabi, Medhat
dc.date.accessioned2017-05-09T01:32:45Z
dc.date.available2017-05-09T01:32:45Z
dc.date.issued2016
dc.identifier.issn0094-9930
dc.identifier.otherpvt_138_04_041204.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/162360
dc.description.abstractThe inner surface of a reactor pressure vessel (RPV) is assumed to be subjected to pressurized thermal shocks (PTSs) caused by the injection of emergency cooling water. The downstream is not homogeneous but typically in a plume shape coming from the inlet nozzles. In this paper, both deterministic and probabilistic methods are used to assess the integrity of a model RPV subjected to PTS. The favor code is used to calculate the probabilities for crack initiation and failure of the RPV considering crack distributions based on cracks observed in the Shoreham and PVRUF RPVs. The study shows that peak KI of the cracks inside the plume increases about 33% compared with that outside. The conditional probability inside the plume is more than eight orders of magnitude higher than outside the plume. In order to be conservative, it is necessary to consider the plume effect in the integrity assessment.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleProbabilistic Pressurized Thermal Shock Analysis for a Reactor Pressure Vessel Considering Plume Cooling Effect
dc.typeJournal Paper
dc.journal.volume138
dc.journal.issue4
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.4032197
dc.journal.fristpage41204
dc.journal.lastpage41204
dc.identifier.eissn1528-8978
dc.treeJournal of Pressure Vessel Technology:;2016:;volume( 138 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record