Show simple item record

dc.contributor.authorChopra, O. K.
dc.contributor.authorRao, A. S.
dc.date.accessioned2017-05-09T01:32:44Z
dc.date.available2017-05-09T01:32:44Z
dc.date.issued2016
dc.identifier.issn0094-9930
dc.identifier.otherpvt_138_04_040802.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/162351
dc.description.abstractThe effect of thermal aging on the degradation of fracture toughness and Charpyimpact properties of austenitic stainless steel (SS) welds has been characterized at reactor temperatures. The solidification behavior and the distribution and morphology of the ferrite phase in SS welds are described. Thermal aging of the welds results in moderate decreases in Charpyimpact strength and fracture toughness. The uppershelf Charpyimpact energy of aged welds decreases by 50–80 J/cm2. The decrease in fracturetoughness J integralresistance (JR) curve or JIc is relatively small. Thermal aging has minimal effect and the welding process has a significant effect on the tensile strength. However, the existing data are inadequate to accurately establish the effect of the welding process on fracture properties of SS welds. Consequently, the approach used for evaluating thermal and neutron embrittlement of austenitic SS welds relies on establishing a lowerbound fracturetoughness JR curve for unaged and aged and nonirradiated and irradiated SS welds. The existing fracturetoughness JR curve data for SS welds have been reviewed and evaluated to define lowerbound JR curves for submerged arc (SA)/shielded metal arc (SMA)/manual metal arc (MMA) welds and gas tungsten arc (GTA)/metal inert gas (MIG)/tungsten inert gas (TIG) welds in the unaged and aged conditions. At reactor temperatures, the fracture toughness of GTA/MIG/TIG welds is a factor of about 2.3 higher than that of SA/SMA/MMA welds. Thermal aging decreases the fracture toughness of all welds by about 20%. The potential combined effects of thermal and neutron embrittlement of austenitic SS welds are also described. Lowerbound curves are presented, which define the change in coefficient C and exponent n of the powerlaw JR curve and the JIc value for SS welds as a function of neutron dose. The potential effects of reactor coolant environment on the fracture toughness of austenitic SS welds are also discussed.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleMethodology for Estimating Thermal and Neutron Embrittlement of Austenitic Stainless Steel Welds During Service in Light Water Reactors
dc.typeJournal Paper
dc.journal.volume138
dc.journal.issue4
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.4031910
dc.journal.fristpage40802
dc.journal.lastpage40802
dc.identifier.eissn1528-8978
dc.treeJournal of Pressure Vessel Technology:;2016:;volume( 138 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record