Show simple item record

dc.contributor.authorHyeon Eom, Ki
dc.contributor.authorWeon Kim, Jin
dc.contributor.authorJae Kim, Yun
dc.contributor.authorSung Kim, Jong
dc.date.accessioned2017-05-09T01:32:41Z
dc.date.available2017-05-09T01:32:41Z
dc.date.issued2016
dc.identifier.issn0094-9930
dc.identifier.otherpvt_138_02_021406.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/162338
dc.description.abstractThis study investigates the interaction effect of multipleaxial partthroughwall (PTW) flaws on the failure behavior of Alloy 690TT steam generator (SG) tubes. Burst tests of tubes with single and multiple flaws were conducted at room temperature (RT). The flaws were made by the electrodischarge machining (EDM) method on the outer surface of the specimens. Six different configurations of multiple flaws were considered to see the interaction effect; two and three collinear, two and three parallel, and two and three nonaligned flaws. In all cases, an axial flaw with a constant depth of 50% wallthickness was considered, and the following variables were systematically varied; the axial and/or circumferential separating ligament lengths between flaws, the flaw length, and the number of flaws. Effects of these variables on the failure pressure and failure mode were investigated based on experimental data. The effects of separating ligament lengths and flaw lengths on the failure pressure were dependent on the type of flaw configuration. For collinear and nonaligned flaws, the decrease in failure pressure by the interaction of multiple flaws became significant as the number of flaws increased. The failure mode of multiple flaws was strongly dependent on the length of the flaws.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleFailure Behavior of Multiple Axial Part Through Wall Flaws in Alloy 690TT Steam Generator Tubes
dc.typeJournal Paper
dc.journal.volume138
dc.journal.issue2
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.4031663
dc.journal.fristpage21406
dc.journal.lastpage21406
dc.identifier.eissn1528-8978
dc.treeJournal of Pressure Vessel Technology:;2016:;volume( 138 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record