Show simple item record

dc.contributor.authorSeko, Yusuke
dc.contributor.authorImai, Yasuhito
dc.contributor.authorMitsuya, Masaki
dc.contributor.authorOguchi, Noritake
dc.contributor.authorMinami, Fumiyoshi
dc.date.accessioned2017-05-09T01:32:40Z
dc.date.available2017-05-09T01:32:40Z
dc.date.issued2016
dc.identifier.issn0094-9930
dc.identifier.otherpvt_138_02_021404.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/162337
dc.description.abstractA constraint loss correction procedure using the Weibull stress criterion is specified in ISO 27306. However, this standard is applicable only to structural steel components with defects, not to welded joints. Therefore, we propose a method for estimating the brittle fracture limit of a weld with a notch in the heataffected zone (HAZ) and residual stress based on the Weibull stress criterion. Threepoint bending (3PB) tests and wideplate (WP) tension tests of HAZnotched welds made of 780MPa class highstrength steel were conducted at −40 آ°C. The minimum critical crack tip opening displacement (CTOD) of the WP specimen fracturing at the coarsegrained region of the HAZ (CGHAZ) was approximately four times that of the 3PB specimen. Then, the effects of specimen geometry, residual stress, crackfront shape, and HAZ microstructure classification on the Weibull stress were investigated by using a finite element analysis (FEA). The results of these analyses showed that the specimen geometry, the welding residual stress, and HAZ microstructure affect the Weibull stress of HAZnotched welds as crack driving force. Based on above results, the CTOD–Weibull stress curves for 3PB and WP specimens fracturing at CGHAZ were calculated by using an FEA. It was confirmed that the brittle fracture limit of an HAZnotched weld with residual stress could be predicted from the Weibull stress criterion because predicted critical CTOD of WP specimens obtained by Weibull stress included experimental critical CTOD of WP specimens.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleApplication of Weibull Stress Criterion to Brittle Fracture Assessment of Heat Affected Zone Notched Welds With Residual Stress
dc.typeJournal Paper
dc.journal.volume138
dc.journal.issue2
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.4031662
dc.journal.fristpage21404
dc.journal.lastpage21404
dc.identifier.eissn1528-8978
dc.treeJournal of Pressure Vessel Technology:;2016:;volume( 138 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record