Show simple item record

dc.contributor.authorKhawaja, Hassan A.
dc.contributor.authorMessahel, Ramzi
dc.contributor.authorEwan, Bruce
dc.contributor.authorMhamed, Souli
dc.contributor.authorMoatamedi, Mojtaba
dc.date.accessioned2017-05-09T01:32:40Z
dc.date.available2017-05-09T01:32:40Z
dc.date.issued2016
dc.identifier.issn0094-9930
dc.identifier.otherpvt_138_04_041301.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/162336
dc.description.abstractThis paper presents the behavior of pressure in an air–water shock tube. In this work, highpressure air (at 100 bar) interacts with water (at 1 atm ∼ 1 bar) through an orifice in a 100 mm constant diameter tube. The experiments are repeated with three different orifice plate diameters of 4, 8, and 15 mm. The variation of pressure during the transient stage is recorded in these experiments and it is found that with increasing orifice diameter, the amplitude of the pressure increases linearly with time when all other conditions are unchanged. The same phenomenon is simulated using the lsdynaآ® software using an arbitrary Lagrangian Eulerian (ALE) method to solve the problem numerically. Simulations are made with a range of orifice diameters. The experimental results confirm the validity of the simulations algorithm. The simulations also demonstrated that the pressure behaves linearly with orifice diameter only when orifice diameter is less than 15% of the tube diameter.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleExperimental and Numerical Study of Pressure in a Shock Tube
dc.typeJournal Paper
dc.journal.volume138
dc.journal.issue4
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.4031591
dc.journal.fristpage41301
dc.journal.lastpage41301
dc.identifier.eissn1528-8978
dc.treeJournal of Pressure Vessel Technology:;2016:;volume( 138 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record