Show simple item record

dc.contributor.authorWang, Junqiang
dc.contributor.authorHan, Jianmin
dc.contributor.authorDomblesky, Joseph P.
dc.contributor.authorLi, Weijing
dc.contributor.authorYang, Zhiyong
dc.contributor.authorZhao, Yingxin
dc.date.accessioned2017-05-09T01:32:40Z
dc.date.available2017-05-09T01:32:40Z
dc.date.issued2016
dc.identifier.issn0094-9930
dc.identifier.otherpvt_138_02_021402.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/162335
dc.description.abstractCurrent postweld heat treatment (PWHT) methods rely mainly on static thermal sources or line heating using dispersed beams which require significant capital investment and often pose limits on weldment size. In the current study, an alternative PWHT method based on line heating is presented and analyzed. The method, which is intended to perform low temperature stress relief, employs parallel oxyacetylene torches to induce a tensile stress in the vicinity of the weld toe. Xray diffraction (XRD) measurements taken from beadonplate (BOP) welds made using ASTM A57250 showed a 37% decrease in the peak longitudinal stress after parallel line reheating was performed. A corresponding reduction in the stress gradient on the plate surface was also observed. Welding and reheating were also modeled in sysweld to assess how torch placement affected the longitudinal stress distribution and an optimum offset was identified for the 8mm plate thickness used. Analysis of the thermomechanical history in the vicinity of the weld toe indicates that a tensile stress is superposed during reheating and is concurrent with the reduction in the peak longitudinal stress.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleResidual Stress Reduction in Single Pass Welds Using Parallel Line Reheating
dc.typeJournal Paper
dc.journal.volume138
dc.journal.issue2
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.4031548
dc.journal.fristpage21402
dc.journal.lastpage21402
dc.identifier.eissn1528-8978
dc.treeJournal of Pressure Vessel Technology:;2016:;volume( 138 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record