Show simple item record

dc.contributor.authorWang, Enyang
dc.contributor.authorZhou, Wenxing
dc.contributor.authorShen, Guowu
dc.contributor.authorDuan, Daming
dc.date.accessioned2017-05-09T01:32:40Z
dc.date.available2017-05-09T01:32:40Z
dc.date.issued2016
dc.identifier.issn0094-9930
dc.identifier.otherpvt_138_02_021204.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/162332
dc.description.abstractSeveral wellknown equations for estimating the crack length in the singleedge notched bending (SE(B)) specimens from the normalized crack mouth opening displacement (CMOD) compliance are evaluated based on twodimensional (2D) and threedimensional (3D) finite element analyses (FEAs). Twodimensional FEAs are first carried out to verify the reported accuracy and applicable ranges for each equation based on the plane strain models with six different crack lengths. Threedimensional FEAs are then carried out to estimate the errors of prediction of equations that evaluate the crack length from the plane stressand plane strainbased CMOD compliances. Both planesided and sidegrooved models are included in 3D FEAs and have seven different thicknesstowidth ratios. The error of prediction of a given equation is largely impacted by the thicknesstowidth ratio, the crack length, the presence of side grooves, and the use of the plane stressor plane strainnormalized CMOD compliance. Based on the errors of prediction, the relevance of the actual state of stress in the ligament of the SE(B) specimens to the plane strain condition or the plane stress condition is inferred. Knowledge of the relevance of the plane stress condition or the plane strain condition can be used to select the corresponding CMOD compliance in crack lengthCMOD equations, and, therefore, the corresponding predictive accuracy can be improved.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleA Numerical Study on CMOD Compliance for Single Edge Notched Bending Specimens
dc.typeJournal Paper
dc.journal.volume138
dc.journal.issue2
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.4031546
dc.journal.fristpage21204
dc.journal.lastpage21204
dc.identifier.eissn1528-8978
dc.treeJournal of Pressure Vessel Technology:;2016:;volume( 138 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record