Show simple item record

dc.contributor.authorL Lima, Ivo Andrei de O.
dc.contributor.authorBandeira Santos, Alex Alisson
dc.date.accessioned2017-05-09T01:32:39Z
dc.date.available2017-05-09T01:32:39Z
dc.date.issued2016
dc.identifier.issn0094-9930
dc.identifier.otherpvt_138_02_021403.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/162329
dc.description.abstractThe welding onto inservice pipeline (operation condition) results in three possibilities of high risks: leaking and/or explosion by burnthrough, chemical reactions to instability, or even explosion due to the heat on internal fluid and cracking in heat affected zone (HAZ). The numerical methods have a useful role in the assessment of welding conditions for the safe inservice welding of pipelines. Only limited published works have considered direct calculation of burnthrough using a combination of thermal and stress analysis. The mathematical model of the heat source is the most important part of these numerical models, and actually the mathematical model which described better the heat distribution of the arc welding through gasshielded tungsten arc welding (GTAW) process or shielded metal arc welding process is the double ellipsoidal heat source (DEHS) model of Goldak and Akhlaghi (2010, Computational Welding Mechanics, Springer Books, New York, pp. 32–35). However, that model has considered the heat source in rectilinear motion only, and it depends on three parameters (a, b, c) which are related with the weld bead size and shape to define the geometry and coordinates of heat source, and they are determined empirically or experimentally. Few researchers published works that could determine these parameters mathematically, from the welding data. The publication that best analytically addressed this issue was the work of Eagar and Tsai (1983, “Temperature Fields Produced by Traveling Distributed Heat Sources,â€‌ Weld. J., 62(12), pp. 346–355). First, this paper presents a new equation for heat source in double ellipsoid considering the circular motion, trying to develop a model closer to the physical situation of hot tapping onto pipeline. Second, a proposal for determination of the parameters a, b analytically from the Eagar model and Tsai (1983, “Temperature Fields Produced by Traveling Distributed Heat Sources,â€‌ Weld. J., 62(12), pp. 346–355), and third, an experimental facility to get the temperature field that was used to validate the numerical finite element models.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleMathematical Approaching and Experimental Assembly to Evaluate the Risks of In Service Welding in Hot Tapping
dc.typeJournal Paper
dc.journal.volume138
dc.journal.issue2
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.4031506
dc.journal.fristpage21403
dc.journal.lastpage21403
dc.identifier.eissn1528-8978
dc.treeJournal of Pressure Vessel Technology:;2016:;volume( 138 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record