Show simple item record

dc.contributor.authorWan, Wuyi
dc.contributor.authorLi, Fuqiang
dc.date.accessioned2017-05-09T01:32:37Z
dc.date.available2017-05-09T01:32:37Z
dc.date.issued2016
dc.identifier.issn0094-9930
dc.identifier.otherpvt_138_01_011303.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/162319
dc.description.abstractPumps and valves are primary power and control devices in water supply piping systems. A collaborative operational scheme is very important for a series pump–valve system to decrease the transient pressure during the startup process. In order to analyze the influence of the operational time differences between the pump and the valve on the transient process, a complicated pump system was numerically simulated using the method of characteristics (MOC). The boundary conditions of the pump and the valve were separately established by equating an auxiliary element in the discrete mesh. The transient pressure, pump speed, and flow were studied for various time differences and the valve opening process for the series pump–valve startup process. Furthermore, an optimal collaborative scheme was presented to prevent inverse rotation and overpressure during the startup process. The results show that a reasonable timelapse and fast opening can prevent the backward flow and reverse rotation, as well as control the transient maximal pressure during the system startup process.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleSensitivity Analysis of Operational Time Differences for a Pump–Valve System on a Water Hammer Response
dc.typeJournal Paper
dc.journal.volume138
dc.journal.issue1
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.4031202
dc.journal.fristpage11303
dc.journal.lastpage11303
dc.identifier.eissn1528-8978
dc.treeJournal of Pressure Vessel Technology:;2016:;volume( 138 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record