Show simple item record

dc.contributor.authorThodla, Ramgopal
dc.contributor.authorGordon, J. R.
dc.contributor.authorGui, Feng
dc.date.accessioned2017-05-09T01:32:37Z
dc.date.available2017-05-09T01:32:37Z
dc.date.issued2016
dc.identifier.issn0094-9930
dc.identifier.otherpvt_138_02_021405.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/162318
dc.description.abstractThe effect of reeling on the fatigue crack growth rate (FCGR) behavior of welded pipe was investigated both inair as well as in sour environment. The FCGR behavior of the reeled pipe in various notch locations, such as parent pipe (PP), weld center line (WCL), and heat affected zone (HAZ), did not exhibit any effect of reeling (i.e., the properties in the strained and aged conditions were similar to the asfabricated welds). Frequency scan FCGR tests in sour environment (pH = 5/0.0031 MPa H2S) exhibited maximum FCGR in the range of 10أ— to 35أ— higher than the inair values at frequencies in the range of 3–1 mHz and 3أ— to 5أ— at frequencies in the range of 0.3 Hz (risers). In sour service, WCL exhibited better fatigue performance than the PP and HAZ in all conditions. Fatigue performance of PP and WCL was independent of reeling. The poorest fatigue performance was observed in unstrained HAZ. Fatigue performance of HAZ extrados (side last strained in compression) and intrados (side last strained in tension) was similar and better than unstrained HAZ. It was also found that the FCGR in sour environments was controlled by the internal hydrogen due to bulk charging from the sour environment. The overall conclusion is that reeling has no detrimental effect on sour service fatigue crack growth behavior, i.e., sour service fatigue performance of reeled pipe is the same as unreeled pipe.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleEffect of Reeling on Sour Service Fatigue Crack Growth Behavior of Welded API5LX65 Line Pipe
dc.typeJournal Paper
dc.journal.volume138
dc.journal.issue2
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.4031165
dc.journal.fristpage21405
dc.journal.lastpage21405
dc.identifier.eissn1528-8978
dc.treeJournal of Pressure Vessel Technology:;2016:;volume( 138 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record