Show simple item record

dc.contributor.authorTakaya, Shigeru
dc.date.accessioned2017-05-09T01:32:35Z
dc.date.available2017-05-09T01:32:35Z
dc.date.issued2016
dc.identifier.issn0094-9930
dc.identifier.otherpvt_138_01_011402.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/162310
dc.description.abstractThis paper presents an evaluation method for the fatigue strength of similar and dissimilar welded joints of modified 9Cr–1Mo steel, which is a candidate structural material for demonstration of fastbreeder reactor being developed in Japan. The discontinuity of the mechanical properties across a welded joint causes a nonhomogeneous strain distribution, and this effect should be considered in the evaluation of the fatigue strength of welded joints. In this study, a “twoelement model,â€‌ which comprises base metal and welded metal, was employed. First, the strain ranges of each element are calculated, and second, the fatigue lives of each element are evaluated. Finally, the shorter fatigue life is selected as the fatigue life of the welded joint. The failure position can be also estimated by this model. The evaluation results were compared with experimental data obtained at elevated temperature, and the results were in good agreement.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleEvaluation of Fatigue Strength of Similar and Dissimilar Welded Joints of Modified 9Cr–1Mo Steel
dc.typeJournal Paper
dc.journal.volume138
dc.journal.issue1
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.4030932
dc.journal.fristpage11402
dc.journal.lastpage11402
dc.identifier.eissn1528-8978
dc.treeJournal of Pressure Vessel Technology:;2016:;volume( 138 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record