Show simple item record

dc.contributor.authorDaoud, Sid'Ahmed
dc.contributor.authorNehari, Driss
dc.contributor.authorAichouni, Mohamed
dc.contributor.authorNehari, Taieb
dc.date.accessioned2017-05-09T01:32:20Z
dc.date.available2017-05-09T01:32:20Z
dc.date.issued2016
dc.identifier.issn0892-7219
dc.identifier.otheromae_138_01_011802.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/162250
dc.description.abstractThis paper presents a numerical investigation of a twodimensional (2D) oscillatory flow around a cylinder of different elliptic ratios, in order to study the effect of the elliptic form of the cylinder on the vorticity field and the hydrodynamic forces that act on it. The elliptic ratio خµ was varied from 1 to 0.1, where the small axis is parallel to the flow direction, simulating cases ranging from a circular cylinder to the case of a cylinder with a profiled elliptic section. The investigations presented here are for Reynolds number Re = 100 and Keulegan number KC = 5. The numerical visualization of the flow for different elliptic ratios shows five different modes of vortex shedding (symmetric and asymmetric pairing of attached vortices, singlepair, doublepair, and chaotic), which depend on the range of the elliptic ratio. The results show that the longitudinal force increases with the reduction of the elliptic ratio. The transverse force appears from the elliptic ratio خµ=0.75 and increases with the reduction of this ratio in the range of 0.75≥خµâ‰¥0.4, then decreases for خµ<0.4. On the other hand, concerning the Morison coefficients the results show that the drag coefficient is sensitive to the swirling layout while the coefficient of inertia does not seem to be much affected by the geometry of the cylinder.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleNumerical Simulations of an Oscillating Flow Past an Elliptic Cylinder
dc.typeJournal Paper
dc.journal.volume138
dc.journal.issue1
dc.journal.titleJournal of Offshore Mechanics and Arctic Engineering
dc.identifier.doi10.1115/1.4031926
dc.journal.fristpage11802
dc.journal.lastpage11802
dc.identifier.eissn1528-896X
dc.treeJournal of Offshore Mechanics and Arctic Engineering:;2016:;volume( 138 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record