Show simple item record

dc.contributor.authorPark, Jeongmoon
dc.contributor.authorPagan
dc.contributor.authorAlvarado, Jorge L.
dc.contributor.authorChamorro, Leonardo P.
dc.contributor.authorLux, Scott
dc.contributor.authorMarsh, Charles
dc.date.accessioned2017-05-09T01:30:40Z
dc.date.available2017-05-09T01:30:40Z
dc.date.issued2016
dc.identifier.issn0022-1481
dc.identifier.otherht_138_08_080908.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/161695
dc.description.abstractVisualization of the flow structure generated by passive vortex generators continues to be a matter of research in the fluid mechanics and heat transfer communities. In this study, selfsustaining counterrotating vortex pairs (CVP) generated from a series of vortex generators (VG) have been characterized numerically and experimentally to understand the effects of the VG parameters on vortical flow structure formation. Four different types of VGs were considered by varying the taper angle from 0آ° to 19.3آ° at a fixed inclination angle of 24.5آ° and a Reynolds number of 1965. Flow fields were experimentally visualized using a smoke technique. Each VG induced a coherent CVP flow structure in the wake region despite the fact that the upstream flow was laminar. CVPs initially dominate flow dynamics over a certain streamwise length; however, KelvinHelmholtz (KH) instability appears to affect the spatial evolution of CVP longitudinally. The CVP within the stability region were reconstructed digitally in 3D by interpolating several 2D smoke images taken at various spanwise planes. The smoke results indicate that as taper angle decreases, the onset location of KH instability decreases. Furthermore, the CVP trajectory within the stability region was observed to be predominantly controlled by a twodimensional inviscid process, while the effects by the free stream were not significant. Based on the experimental observations and the numerically reconstructed 3D CVP flow structures, VG with smaller taper angle results in CVPs with higher circulation, which is a positive aspect for mass and heat transfer applications. Preliminary numerical simulations based on RANS have shown that heat transfer enhancement is about 50% in the region near the rectangular vortex generator.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleExperimental and Numerical Visualization of Counter Rotating Vortices
dc.typeJournal Paper
dc.journal.volume138
dc.journal.issue8
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.4033825
dc.journal.fristpage80908
dc.journal.lastpage80908
dc.identifier.eissn1528-8943
dc.treeJournal of Heat Transfer:;2016:;volume( 138 ):;issue: 008
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record