Show simple item record

dc.contributor.authorChakraborty, Shubhankar
dc.contributor.authorSahu, Omprakash
dc.contributor.authorDas, Prasanta Kr.
dc.date.accessioned2017-05-09T01:30:30Z
dc.date.available2017-05-09T01:30:30Z
dc.date.issued2016
dc.identifier.issn0022-1481
dc.identifier.othervib_138_04_041013.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/161638
dc.description.abstractThe thermal hydraulic performance of a miniature heat sink during flow boiling of distilled water is presented in this article. The unique design of the heat sink contains a number of microchannels of 1 mm أ— 1 mm cross section arranged in a regular hexagonal array. The design facilitates repeated division and joining of individual streams from different microchannels and thereby can enhance heat transfer. Individual slug bubble experiences a typical route of break up, coalescence, and growth. The randomness of these processes enhances the transport of heat. With the increase of vapor quality the heat transfer coefficient increases, reaches the maximum value, and then drops. The maximum heat transfer coefficient occurs at an exit vapor quality much higher than that observed in conventional parallel microchannel heat sinks. Repeated redistribution of the coolant in the interlinked channels and the restricted growth of the slug bubbles may be responsible for this trend.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleFlow Boiling in a Heat Sink Embedded With Hexagonally Linked Minichannels
dc.typeJournal Paper
dc.journal.volume138
dc.journal.issue8
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.4033354
dc.journal.fristpage81504
dc.journal.lastpage81504
dc.identifier.eissn1528-8943
dc.treeJournal of Heat Transfer:;2016:;volume( 138 ):;issue: 008
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record