Pool Boiling Heat Transfer Enhancement of Water Using Brazed Copper Microporous Coatings
View/ Open
Date
2016Author
Jun, Seongchul
Wi, Hyoseong
Gurung, Ajay
Amaya, Miguel
You, Seung M.
Metadata
Show full item recordAbstract
A novel, hightemperature, thermally conductive, microporous coating (HTCMC) is developed by brazing copper particles onto a copper surface. This coating is more durable than many previous microporous coatings and also effectively creates reentrant cavities by varying brazing conditions. A parametric study of coating thicknesses of 49–283 خ¼m with an average particle size of ∼25 خ¼m was conducted using the HTCMC coating to understand nucleate boiling heat transfer (NBHT) enhancement on porous surfaces. It was found that there are three porous coating regimes according to their thicknesses. The first regime is “microporous†in which both NBHT and critical heat flux (CHF) enhancements gradually grow as the coating thickness increases. The second regime is “microporoustoporous transition†where NBHT is further enhanced at lower heat fluxes but decreases at higher heat fluxes for increasing thickness. CHF in this regime continues to increase as the coating thickness increases. The last regime is named “porous,†and both NBHT and CHF decrease as the coating thickness increases beyond that of the other two regimes. The maximum NBHT coefficient observed was ∼350,000 W/m2K at 96 خ¼m thickness (microporous regime) and the maximum CHF observed was ∼2.1 MW/m2 at ∼225 خ¼m thickness (porous regime).